500hp VTSS 383

[nathan383]

Hey all just thought I'd post up my new beast.

VTSS 383

Mods

Diamond Pistons
Eagle Crank & Rods
Kass Diff
Koni Suspention (all round)
comp cams 272/272/110
150 shot NOS
fast manifold
fast 90mm throttle body
tripple plate clutch
PBR brake upgrade
$3000 USA?? Heads

Dyno'd 400rwkw without nos (around 500hp at fly)

[badnews]

sounds tough mate, post up some pics

[Brumby]

Does it make more power at the wheel then fly? 272/272 in that advertised duration or @0.50''

[nathan383]

Get some pics up in the next few days not to good with these PC's
dont no how to upload them from my phone.
All I can say is it's ne clean fast ride.

Cheers nate

[whitels1ss]

Hey all just thought I'd post up my new beast.

VTSS 383

Mods

Diamond Pistons
Eagle Crank & Rods
Kass Diff
Koni Suspention (all round)
comp cams 272/272/110
150 shot NOS
fast manifold
fast 90mm throttle body
tripple plate clutch
PBR brake upgrade
$3000 USA?? Heads

Dyno'd 400rwkw without nos (around 500hp at fly)

400rwkw= 536rwhp over 650hp at the flywheel,
Thats unbelievable, No wonder you are happy!
Could you post up some pics and your dyno sheets mate please? :)
Should be capable of somewhere in the mid 10's!

[vx_clubby]

thats quite a large cam :P

[nathan383]

Brumby,

It makes 500hp at engine
And around 400kw@wheels
As I said thats with no NOS
It's got 150 shot that can be hooked up.
Loves snaping axles. Time for a billet job

HUGE Cam got to love it!!

[Brumby]

400kw = 536hp plus drivetrain loss

[nathan383]

WhiteLS1ss,

Would be happy to post up dyno sheet just have to figure out how to do it.
Really cant be that hard!! Sheet shall be up in the next few days.
Old engine ran 340rwkw and ran a 11.4 in street trim.
This should be easy capable of mid 10's.
Sorry must of got my calcuations wrong but I no for sure it has 400kw@rear.
Cant wait to run some gas through it.

Brumby,

So does that mean my calculations would be right??

500hp engine
400kw rear??

[Brumby]

650hp at engine would be closer. unless it 400hp@wheels Big power for a na well done where was it tuned

[whitels1ss]

Sounds like a great weapon mate, what gears you got in the back of it?

[commyvt]

with that cam what revs she start to pull at and whats it like at idle

[nathan383]

Was tuned, owned and built by michael at KANE Performance (Melbourne)
I'm 100% sure he said 400kw@rear. It's he's pride and joy but has offered it to me for a reasonable price so just couldn't say no. Haven't actualy got it in my garage yet but will by next week. Not to much street driving though dont think it's that wise. I'll get the dyno sheet by wednesday and post it up.
It really does look mint I'm wrapped, just a little to loud for too much road use.

Cheers Nate

Going for a drive on wednesday so shall fill you all in on all the goss.
I no he sais there is no traction in 1'2'3. Got the monaro bonnet on it aswell looks tuff as.

Cheers nate

[posesd]

the best toy

[iloveholden]

Sounds very nice, got any pics?

[AGIT8D]

Sounds tough as mate wouldnt mind seein pics.. Monster cam!

[MISTRSS]

I think you got your figures wrong, 400rwkw would be close to 500-530kw at engine which is 670+hp at engine. In a 383 hrmmmm.....one angry 383!

[GETUTED]

comp cams 272/272/110

MASSIVE cam for a 383!!! I was thinking this size for my 427 but thought it'd be too big!!! :eyes:

[AGIT8D]

Wouldn't be entirely impossible but it'd have to be a faaaarkin monster suckin some race fuel I'd have thought :) I hope it is, the idea of that sounds pretty good!

[ssdamo]

:worthless: sorry had to do it.... my first time lol

[hotbox]

Does it lift the front wheels on launch:confused:

[nathan383]

Yeah but I'm sure you dont want to see em had a bit of a accident the other day. Has not been a good week put it that way!!

Looking for a VT SS Rolling Shell now or a claped out one either way need one asap if there's any hanging around please let me no.

Cheers nate.

I might have my figures wrong but that is the cam in it for sure!!
Only just starts getting traction in 4th and by then your doing well over 200km. Believe me it's one scary machine maby just a little to scary for me.

As I said accident has happend need VTSS Rolling Shell ASAP for a good price any one got please let me no.

Cheers nate.

[34CHEV]

:worthless:

[Brumby]

:worthless:

+1

sound like it might have a heap more power then your claiming being able to pull power skids and only get traction a 200km/h i reakon you got 1000hp. Love to hear a sound file of the car idling 272/272 cam would sound extreme

[whitels1ss]

Yeah but I'm sure you dont want to see em had a bit of a accident the other day. Has not been a good week put it that way!!
As I said accident has happend need VTSS Rolling Shell ASAP for a good price any one got please let me no.
Cheers nate.

You had a "Bit of an accident" and you need a new body shell?
Sounds like a bad accident!
Are you OK?
Anyone else hurt?
What happened?

[MR-GEM]

Sounds the goods...hope all is well with the car.

[Nutter]

Something smells here

[Smokin SS]

Hmm. Something's not right here.

At 10:26p.m. on the 07/07 (Monday) it wasn't in your garage. But by 11:51p.m. last night you say you had crashed it?

Within 5 days you have a bought a car (tough one by the sounds of it), crashed it, and now your selling the parts?

[iloveholden]

Im gonna need pics for proof here otherwise, like said above, something is a little off :confused:

[ssdamo]

i smell :bs:

[SLY 57L]

It's school holidays again! :rofl:

[whitels1ss]

Hmm. Something's not right here.

At 10:26p.m. on the 07/07 (Monday) it wasn't in your garage. But by 11:51p.m. last night you say you had crashed it?

Within 5 days you have a bought a car (tough one by the sounds of it), crashed it, and now your selling the parts?


i smell :bs:

No pictures either???

[iloveholden]

It's school holidays again! :rofl:

:rofl::rofl::rofl: yeah i think your right mate

[nathan383]

Guys smell what ya want i test drove the beast and it unleashed on me in 3rd gear smashed into the back of a truck coming towards me and did a 360 and ended up smashing into a gutter and stopping in the back of a tree.
I wish it was bullshit i'd be driving the animal right now but things went wrong now I have to fix it, thats why I would be asking for a rolling shell because the other one is f@cked. And yeah your right it did have about 600+hp I was speaking to the EX owner today, now I'm the owner because I wrapped it.
Going to fowles on wednesday to try and find a shell or cheap SS to solve this nightmare. I dont no why you think someone would waste there time writing crap WHAT"S THE POINT!!!! you dont even no me. I'm down about 30k I wish that was school talk. Think before you write guys..

I wont bother next time everyone just seems to like to smell shit!!
Thats what happend guys get over it, I no it will take me a while.
At least it's only money not lives..thats all I have to say.

Nate

[clubbie]

I feel sorry for you Nathan. Forum members are not fools.

Post up the pictures so everybody can shut up and apologise.

Until then as the saying goes.....looks like bullshit.....smells like bullshit....then it is bullshit...all 400rwkw of bullshit.

As for breaking traction at 200km/h in a na 383 roll on ......d....r....e....a....m........o...n.

BTW where and when was the accident?

[whitels1ss]

I'm down about 30k
Nate

Are you saying that you paid $30,000 for a VTSS Commodore and you have no pics?
Mate I don't reckon you need a bigger shovel, you are doing fine with the one you have got! :rofl::rofl::rofl::rofl:
Why don't you post up some pics?

[clubbie]

Hahaha.

Nathan I am your new friend in need of some money!!!!!!

If you want to piss $30k against a tree PM me.

I can organise a trip to Vegas including the following
Airfares
Accommodation
Whores
Alcohol
and still have $15k to blow at the casinio's

Clubbie

[whitels1ss]

now I'm the owner because I wrapped it.


Hold on, the story has changed again, in the first post you had bought the car and not picked it up yet, now, you are the owner of a car "because you wrapped it."
How does the story change like that?

[LS2_307]

Guys smell what ya want i test drove the beast and it unleashed on me in 3rd gear smashed into the back of a truck coming towards me and did a 360 and ended up smashing into a gutter and stopping in the back of a tree.
I wish it was bullshit i'd be driving the animal right now but things went wrong now I have to fix it, thats why I would be asking for a rolling shell because the other one is f@cked. And yeah your right it did have about 600+hp I was speaking to the EX owner today, now I'm the owner because I wrapped it.
Going to fowles on wednesday to try and find a shell or cheap SS to solve this nightmare. I dont no why you think someone would waste there time writing crap WHAT"S THE POINT!!!! you dont even no me. I'm down about 30k I wish that was school talk. Think before you write guys..

I wont bother next time everyone just seems to like to smell shit!!
Thats what happend guys get over it, I no it will take me a while.
At least it's only money not lives..thats all I have to say.

Nate


Smacked into the back of a truck coming towards me.........WTF!:1peek:
work that one out??

[CRBZ]

I dont no if this story is true or false but ive been a forum jumper for SOME TIME now and storys / people that make them like this one are becoming more and more common... Is it possible we have another fiction writer in our presence haha.

[34CHEV]

I've said it once and I'll say it again
:worthless:

[iloveholden]

I will apoligise all you want AFTER I SEE SOME PICS.

Come on mate if its bullshit then stopping wasting time otherwise posts some pics so we can say sorry and move on.

[JT]

picsorban...................nuff said

[MISTRSS]

moderators! better close this one...or not!

Wouldnt mind seeing some pics before/after so called crash

If theres any pics

nathan383?

[TimmyG]

looks like ill have to say it as well

:worthless:

[VXSS346]

Me too.
:worthless:

[nathan383]

I have pics on my phone guys of engine tell me how to put them on here and I will, Now the story is going to change even more because I have decided to sell engine, gearbox, diff and all other parts that are still in good working order. After I get the engine and box out and dyno the engine which I have been told will make around 600hp I'm sure I'll be able to get a good $ for it.

But as you all want pics soooooo bad please explain how I do it and they will be on for all to see.

Cheers nath

Even give me a phone number of a trusted member and i can send via mutimedia and then they can post em up for ya all to see.

More than happy to back up what I've wrote and as I said before my power figures we misunderstood by me 400rwkw / 500hp@rear = around 620hp engine. Correct??
C'mon guys give me a chance I dont like people calling me a sh@t talker!!
Because I'm NOT.

Cheers nate.

[whitels1ss]

I have pics on my phone guys of engine .

Buddy, I think it will take a bit more than a couple of pics of an just an engine to dig you out of the p00 on this story. I think they will all need to see pics of the wreck and dyno sheets.

I am sorry that I do not know how to post pics on here but I think someone will be able to help you if you stay on line,
cheers. :)

[nathan383]

I have pics of wreck, engine before and after, as I said I'm new to these forums didn't no everyone starts knocking you if you dont have pics.
I have no need to make a story up mate whats the point??
I joined the forum because I was buying a monster Holden but everything went a little pair shaped beleive me if I could turn back time I would of got to no the car a little better and it would still be in one peice. But unfortunatly thats not the way things unfolded. But all I can say that everything I have posted has been spot on (exept for getting my power figures wrong)

Cheers nath

[whitels1ss]

I have pics of wreck, engine before and after, as I said I'm new to these forums didn't no everyone starts knocking you if you dont have pics.
I have no need to make a story up mate whats the point??
I joined the forum because I was buying a monster Holden but everything went a little pair shaped beleive me if I could turn back time I would of got to no the car a little better and it would still be in one peice. But unfortunatly thats not the way things unfolded. But all I can say that everything I have posted has been spot on (exept for getting my power figures wrong)

Cheers nath

Thats great Nathan, I look forward to seeing them.
cheers. :)
By The Way... Did you really pay $30,000 last week for a VTSS? ...(quote.."I'm down about 30K")

[nathan383]

Cheers WhiteLS1,
I really dont like looking at them as you can understand why, has been a pretty bad week or so for me but for everyone else i have no prob with posting up all the pics I've got as soon as I find out how to do so.

Cheers nate

Going down to shop hopefully by the time I get back some one will give me some idea's of getting these pics up.

[whitels1ss]

Cheers WhiteLS1,
I really dont like looking at them as you can understand why, has been a pretty bad week or so for me but for everyone else i have no prob with posting up all the pics I've got as soon as I find out how to do so.

Cheers nate

Going down to shop hopefully by the time I get back some one will give me some idea's of getting these pics up.


I am sorry Nathan, it may well have been that you had a pretty bad week and so you may have been very upset when you were writing them and that is why your posts came through sounding a little vague.
Some of the story has changed on the way through but if it was because you were upset and not thinking straight when you wrote your story I am sorry!
cheers :)

[nathan383]

No worries at all bud yeah my head has been scrambled hard this the last week and a half, but just sorting out where to go from here.

Thanks for being a good bloke hopefully there's a few more on here.

Cheers nate

I sure did pay 30k fot a VTSS as people say a car is worth what someone is willing to pay. If you have seen the time and endless money pored into this thing you might of considered it too. It is a lot of money dont get me wrong but the engine and box would be worth that so it worked for me.
Bought a CBR 1000 the week before aswell. Still getting to grips the fact the SS lasted about 15seconds before it was wrecked but luckly the engine and box diff are all ok so I'm sure I'll get close to my money back after they all go to one lucky person.

Cheers nath

Anybody got any ideas to get these pics up????

[whitels1ss]

Bump!!!!!!
Nathan would like to post some pictures of his car, please could someone who is a bit more computer savvy than me, (that leaves it wide open, :rofl:)
please PM him or help somehow?
Cheers. :)

[HRT Stroker]

Has been stuck to the top of the Multimedia exchange since '95, also regularly covered in the Forum Help and Feedback section.....instructions are here:

Australian LS1 and Holden Forums (http://www.ls1.com.au/forum/showthread.php?t=30924)

I haven't used this for a while, but it's still there so I guess it still works.......

[whitels1ss]

Has been stuck to the top of the Multimedia exchange since '95, also regularly covered in the Forum Help and Feedback section.....instructions are here:

http://www.ls1.com.au/forum/showthread.php?t=30924

I haven't used this for a while, but it's still there so I guess it still works.......

I tried that once and I gave up. I know a lot of people can do it, but I have also seen a lot of other find it too hard! Cheers :)

[HRT Stroker]

Alternatively there are sites such as photobucket, but they may block the link if it get's to many hits.

[nathan383]

Bump

Still no one no's how I can get my pics from my phone onto the screen for you all. Anyway in a few weeks it will all be for sale so there will be pics for sure for all to see. Just gona take a few weekends to rip engine , box , diff and a few other things out. Then I'll have to dyno the engine so the buyer really no's what there buying. I'll be trying to sell engine , box , tripple plate cluch , and kass diff as a total package so if anyone's thinking of going down that path give me a few weeks or so and all shall be ready to go.
But beleive me who ever buys it be carefull it's scary fast take it from someone who has felt it unleash. I can comfortly say it will make 600hp if not a tad more on an engine dyno. Oh Yeah and there will be a NOS setup aswell for sale.

Cheers Nath

[DaveHAT]

This whole thead is too fascinating ... PM sent re: pics and hosting them.

:cool:

[ls1pds]

hey mate

i can post up your pics if you want to mms the pics to my mobile.
let me know and i can pm my mobile number

[tacka007]

sounds like this animal should be caged:jester:

[nathan383]

LS1pds how do I get PM's sorry man just really new to the whole forum stuff.
But yeah cool be happy to send you photo's

Cheers nath

[whitels1ss]

look on the top right corner of the web page and click where it says "Private Message" it will take you there. :)
(That is right under where it will say Welcome Nathan383)

[nathan383]

Yeah I cant even send PM's back because my count is only at 7 and I need 10 so I need a phone number of someone and I shall send via multimedia.

Cheers nath

Just had a phone call from a friend looks like engine will be sold soon just has to make 600@fly and I think that will be a piece of p#ss. hahahaha stoked!!

So gearbox and diff will most likely still be for sale, got a good friend who has seen it in the flesh and I'm pretty sure he will snap up most things. At the end of the day why wouldn't you no $$ have been spared on this puppy.

[whitels1ss]

How many? is that now 8?
I have sent you a PM, did you get it?
Can You see PMs?

[nathan383]

yeah got your PM but my count is still only 7 as I said a mobile number will be the easiest way then who ever sends number can put up all the pics

[ssdamo]

"smashed into the back of a truck coming towards me" :confused: how does come about ??

[whitels1ss]

Can you get PM's Mate?
Sent you another...

[throttlehappy]

im assuming it had excellant fuel economy

[whitels1ss]

The guy is trying to post up some pics and can't do it.
Can someone who knows how to post pics on here PM the guy a mobile number so he can send them by MMS to someone who can post them up for him please. :)
That is PM nathan383

[nathan383]

How i came to smash into an oncoming truck, was I was on one side of the road hit 3rd gear the SS went mental on me tryed my very best to control the loss of traction and there was an oncoming truck coming toward me.
He swerved as close as he could to the gutter because he saw me coming totaly out of control (it was 10am in the morning very cold roads around 5 degrees culcuius air temp so you can imagine how cold the roads were). i ended up hitting the back corner of his truck totally ripping of my bonnet and sending me into a 360 and up a gutter into the back of a tree. VERY SCARY!!

The bonnet looks like a coke can now I thank my lucky stars either me or the ex owner were seriously injured it was very close to being a lot lot worse. As i have said in my previous posts lifes can not be repaired but panels can. The front right shock ended up in the firewall, VERY hard impact. Soooo lucky the engine was not damaged will need new extractors for it but I shall be selling engine so extractors dont come with that. So I hope that explains how I hit an oncoming truck, and please dont think I was hooning guys because i just wasn't. I am used to driving turbo cars you have to wait for boost in turbo cars totally different power delivery in NA V8's especialy ones with 600hp @ fly. This is why I have decided to sell all working parts and call it a loss I'm sure someone else wil have a lot of fun with this 383 I think I'll just stick to my company car and CBR1000 for the time being.


Cheers nath

I promise guys and girls i will take some video footage of the 383 being dyno'd
making the big numbers i no it will and put it up on youtube for all to see.
But as i've said i do have pics of before and after of the car and am happy to post just dont no how.
Anyway it's not a big deal anyway what I've said is what has happend so just take my word for it, ( no I'm not on school holidays that would be my little bro and it's not him typing it's me ) Wish this stupid count thing would get up then I could send PM's ect ect.

The Title should have been at the start 500hp@rear would of been more realistic. And that sure is a lot of power WAY to much for the street.

Cheers Nath

By the way whiteLS1 how much HP or KW is your baby making??

Cheers Saj sending photo's right now should be up soon YAY!!!

[whitels1ss]

Cheers Nathan, hope it works out and they can get these pics up for you soon.
By The Way, did you get any PMs from me? :)

[nathan383]

Yeah mate got some pm's from you I had about 7 photo's all up I ended getting 3 to Saj but now my phone is saying cant send for some stupid reason really wish I new how to fix it. I'll work it out eventually and get em all up phone's PC's i dont no ( or maybe it's the opperator) hahaha i say that would be more likely.

Anyway you should have 3 pics up soon

[saj]

http://i52.photobucket.com/albums/g24/saj_01/Image010.jpg

http://i52.photobucket.com/albums/g24/saj_01/Image012.jpg

http://i52.photobucket.com/albums/g24/saj_01/Image015.jpg

http://i52.photobucket.com/albums/g24/saj_01/09072008027.jpg

[nathan383]

Thanks heaps Shane aka saj,

Think we'll get em up tonight???

Great your a gun cheers bro now all to see that was my beast now as you can all see she's a bit worse for ware.

Thankyou very much Shane.

[saj]

http://i52.photobucket.com/albums/g24/saj_01/Image011.jpg

http://i52.photobucket.com/albums/g24/saj_01/09072008031.jpg

[nathan383]

Shane how much HP in your 402?? If you dont mind me asking?
She on the Gas?

[saj]

Shane how much HP in your 402?? If you dont mind me asking?
She on the Gas?

Enough to run a 10.9@126 N/A:)

[nathan383]

Lovely yours and my old one would have been a nice match up, dam that really hits me where it hurts i would say mine would of got there for sure with out the gas.

Thanks again for posting them up for me.

Cheers nath

Now for all you non-believers start sending those appologies!!

[whitels1ss]

http://i52.photobucket.com/albums/g24/saj_01/Image010.jpg

http://i52.photobucket.com/albums/g24/saj_01/Image012.jpg

http://i52.photobucket.com/albums/g24/saj_01/Image015.jpg

http://i52.photobucket.com/albums/g24/saj_01/09072008027.jpg

Nathan I have just come back to the computer.
Firstly, Mate, I must apologize to you for doubting what you said.
That looks like a very tough car that you had there. I can see it had quite a few decent mods on it.:bow:
I am sorry to see how it ended up.:bawl:
Hope you get out of the deal as lightly as possible.
Cheers, :)

Hey Nathan, sounds like you had no insurance cover at all?
Will you have any third party damage to pay for?
Did the Police lay any charges or do you expect them to?
Looks as though it was a real bad week for you mate..:bawl:

[nathan383]

No there was nothing illegal being performed at all as I said the roads were cold and slipery there was nothing I could do.
No one was hurt and any damaged caused by the accident has been paid for.
I was doing the speed limit there must have been a tad of oil on the ground combined with freezing temps and slipery road and thats what ended up.
There were no skid marks on the road because I wasn't doing skids it just lost traction which I couldn't avoid and that was the outcome.

At the end of the day as I've said several times no one was hurt which is the main point, there was no hooning involved, I grew out of that about 5 years ago!! it was just an unfortunate accident that I couldn't avoid.

I'm sure if I was doing anything out of the ordinary witnesses would of called police to report a stupid driver on the road which has caused an acident, but that was not the case so lets just be happy everyone is allright.

Cheers Nath

[whitels1ss]

No there was nothing illegal being performed at all as I said the roads were cold and slipery there was nothing I could do.
No one was hurt and any damaged caused by the accident has been paid for.
I was doing the speed limit there must have been a tad of oil on the ground combined with freezing temps and slipery road and thats what ended up.
There were no skid marks on the road because I wasn't doing skids it just lost traction which I couldn't avoid and that was the outcome.

At the end of the day as I've said several times no one was hurt which is the main point, there was no hooning involved, I grew out of that about 5 years ago!! it was just an unfortunate accident that I couldn't avoid.

I'm sure if I was doing anything out of the ordinary witnesses would of called police to report a stupid driver on the road which has caused an acident, but that was not the case so lets just be happy everyone is allright.

Cheers Nath

That is good to hear mate.
Cheers.:)

[nathan383]

Pretty sure I will be able to re-coupe nearly all the money I spent buying the car just by selling parts alone. Engine , box , diff , brakes and other bits should get me up to around 30k.

Very sad at the end of the day would have been nice to enjoy the car for a while but can't be done. I'm sure bigger and better things are to come in the future. I'll just have to be happy cruising my new 07 CBR 1000.
Take it down to the island soon and have some real fun. Cant have fun on the roads just to dangerous and I value my licence.

Cheers Nath

[ADSXR8]

Now for all you non-believers start sending those appologies!!

You couldn't buy an apology from most of these blokes.


Anyways, glad to hear your not going to be out of pocket and nobody got injured.

[nathan383]

Cheers Guys,

Lots of quality parts are for sale very soon I shall post up what in the next few days, pretty sure the engine is already gone for 20k but there should be box , kass diff , ECU , PBR Brakes NOS setup and mach more.

Cheers nath

[DaveHAT]

:shock: ... (puts hand up to also apologise for doubting)

:hide:

Shit ... that's a wee bit of a mess Nathan and such a nice colour too.

(Notes old DaveHAT username :D)

Apologies for doubting here as well and even more so to see a rather nice gadget like that totalled.

Fingers crossed for some good $$$ recouped from the sale of the "leftovers".

:cheers:

EDIT: The engine sold for $20K? :confused:

[throttlehappy]

wouldnt the engine have swallowed some plastic from the maf pipe?

[SirNemesis]

wouldnt the engine have swallowed some plastic from the maf pipe?

Only if he was accelerating just before/after/during the truck impact. Doubt it.

[MISTRSS]

Damn!, I bet your sorry there bud!?!


Lovely yours and my old one would have been a nice match up, dam that really hits me where it hurts i would say mine would of got there for sure with out the gas.

Thanks again for posting them up for me.

Cheers nath

Now for all you non-believers start sending those appologies!!

[nathan383]

yeah a bit sorry about the whole ordeal but happy that i'm gona get all my money back and not lose too much. The ex owner did not skimp on anything on this car so all is quality and will have no probs getting rid of it all.

Already had an offer for the engine as long as it makes the numbers I've claimed, which it will so all good.

If anyone is looking for panels or seats ect ect just post it up in this thread and I'll let ya no what i've got left.

Cheers nath

[MISTRSS]

How much you want for the 6 speed, whats been done to the box?


yeah a bit sorry about the whole ordeal but happy that i'm gona get all my money back and not lose too much. The ex owner did not skimp on anything on this car so all is quality and will have no probs getting rid of it all.

Already had an offer for the engine as long as it makes the numbers I've claimed, which it will so all good.

If anyone is looking for panels or seats ect ect just post it up in this thread and I'll let ya no what i've got left.

Cheers nath

[nathan383]

strengthened gear set can cop 600hp so it's pretty strong and tripple plate cluch.

Wouldn't mind selling both together what do you think is a FAIR price??

have to drive home now should be back on line in about an hour.

would want around 5k for box&clutch.

Cheers nath.........might speak soon there's also a kazz diff up for sale??

Looks like you have a bit of power buddy would suit your ride nicely.

[The Cook]

wow nath, glad to hear your alright, and i hope everything works out for you

[MISTRSS]

Not enough mate, 6 Speed & Stroker will be, for how long though i dont know!

5K you will get brand new, I might go brand new i hardly ever get second hand, but ummm 5K you wont get for box & clutch maybe 3.5K


strengthened gear set can cop 600hp so it's pretty strong and tripple plate cluch.

Wouldn't mind selling both together what do you think is a FAIR price??

have to drive home now should be back on line in about an hour.

would want around 5k for box&clutch.

Cheers nath.........might speak soon there's also a kazz diff up for sale??

Looks like you have a bit of power buddy would suit your ride nicely.

[nathan383]

Might drop to 4.5k depends how keen you are.
Not in a great rush to sell want to get a good dollar for all the goodies.
Clutch alone is worth over 2k

Cheers Cook, everything will be sweet everyone is ok thats the main thing

[MISTRSS]

I'm in W.A. best deal is to sell to someone over your side of the world.


Might drop to 4.5k depends how keen you are.
Not in a great rush to sell want to get a good dollar for all the goodies.
Clutch alone is worth over 2k

Cheers Cook, everything will be sweet everyone is ok thats the main thing

[nathan383]

shall do not a prob at all i think I'l do a deal to a fela I no. motor , box , clutch , diff and NOS setup for around 26k. He'll be one happy man.
Just got of my bike here in sunny melbourne perfect day for a cruise.
Anyway I'll keep you all posted on how many ponnies she makes on the dyno next week. My guess is around 600+ on engine dyno.

Cheers nath

[Nutter]

this smells like bullshit still pics or otherwise lol...

[nathan383]

Nutter,

Have ya had a look at all the pages there are pics up with a name like nutter I say no more.

[C4B]

This is the "my ride" section, if you've got things to sell, go to the classifieds.