PDA

View Full Version : GMVPSS is for sale, check out the new low price.



GMVPSS
30-09-2008, 04:46 PM
1992 Holden VP SS Commodore in Maranello Red.
Race winning, Low maintenance, super consistent 9sec car for sale turn key.
Suit Super Sedan, Super Gas or Pro Street.

Comes complete ready to run 9.9sec or faster passes. (1.33-60')
COME Racing EFI 383ci engine, MSD, Transbraked Powerglide, alloy tail shaft, alloy Mark Williams diff centre, new wheels and tyres, new chute.
Car weighs 2700Lb race ready with driver, so if you're smaller than me the car will go faster.

The Car.
Mild Steel 3/4 chassis with 4-link installed 2002
4-link rear suspension with Koni adjustable Coil Over’s. 4-link has 1/2" bolts for fine adjustment of 4-link.
New Aurora 4-link rod ends in 2007.
Wishbone track locator and anti roll bar.
Tube chassis rear clip (no box tubing) and 1mm thick steel floor. (Super Stock legal)
Quick release Momo steering wheel on fabricated Chrome Moly column with Aircraft universal joints.
Chassis is in excellent condition and drives true and straight.
New 15x3.5 American Racing front rims with new 25x4.5-15 Goodyear tyres (still have pips on them)
New 15x14 American Racing rear rims with 15 pass old 31x14-15 Goodyear slicks
Wilwood front brakes on custom alloy hubs
Wilwood rear brakes with alloy hats and new rotors. (All brake rotors and pads Cryogenically Treated)
Wilwood master cylinder (no booster)
Adjustable height and stroke coil over strut front suspension (spare front springs)
Fibreglass bonnet with glassed in NACA scoop (Original steel bonnet included)
Fibreglass front and rear doors with new lexan windows. (Steel doors with lexan windows included)
Fibreglass boot lid with Deist 10' chute mounted (steel boot lid and VP SS wing included)
Spare Alfa fibreglass bonnet with extension to windscreen to remove the dead area behind the plenum chamber. New and never fitted.
Rear window is 3mm lexan, front windscreen is factory glass and new in 2006.
New Biondo Mega 200 delay box fitted in May '08.
Optima dry cell battery
Velo racing seat, SFI padding, Driveshaft protection tube (chrome-moly)
RPM 5-point Harness and RPM Arm restraints.
VDO Gauges with Xtreme replay tacho and LED shift light. (Oil press, Trans temp and water temp)
All stickers on the car will be removed on sale.
Current Tech and log Book.

GMVPSS Number Plates NOT included in the sale. If you are Victorian and you want them they are extra. They will include VicRoads transfer to you on sale. If you’re an interstate buyer the plates are not for sale.

The Driveline
383ci engine by COME racing
Holden 4 bolt block with COME Alloy heads and COME intake. Solid roller cam with Wiseco pistons and H-beam rods. Cryo valve springs, ARP head studs and all the COME options in this engine. Engine made 550HP and 485ftLb.
Gonzo 4>2>1 Tri-Y headers built specifically for this engine. HPC coated.
Fabricated alloy rocker covers.
Moroso Vacuum pump
Delco EFI with MSD 7AL-2 ignition.
Runs on Sunoco GT Plus unleaded fuel.
TCE 8" converter (new with this engine)
Powerglide with PTC Transbrake in excellent condition. 360° aftermarket bellhousing. (Freshened for this engine)
Ø 3.5" Alloy Tailshaft with 1350 MW yokes and solid uni’s.
Mark Williams alloy diff centre with roller pinion support. Motive gears, 33 spline full spool and 33 spline Moser axles. Diff shortened in April this year to suit new rear rims and tyres.
Bosch high pressure fuel pump with 3/8" ID fuel lines. Bosch and BG fuel filters. 19lt fuel cell mounted in boot.

All engine and driveline components Cryo treated by Cryogen Industries.

80 passes on driveline since complete freshen.

Car has run 9.91 @ 134mph with 1.33-60’. Driver weighs 230Lb.

As noted above you also get the original steel panels (doors, bonnet, and boot), spare fibreglass bonnet, original side and rear glass. This gives you flexibility to choose the class you want to race in.

This car is Super Reliable, Super Consistent and Low Maintenance.

$40k turn key, take it straight to the track and go racing. No trades, will consider all offers.

Call me on 0407 535 645 AFTER 4.30pm weekdays or anytime on the weekend.
Email me for pics and with ANY questions or details you require at Darren@hookplastics.com.au
All contact is confidential.

Darren Parker

UPDATE:

GMVPSS will be at AutoSalon Melbourne this weekend, 4th and 5th of October. So if you are heading down to Jeffs Shed to check out all the 'Rice Burners' come and have a look at the Red Beast and and check out all of the quality race winning features on the car and even make an offer on it!

I will have fliers there with all the specs and details on the car for you to take home and have a think about, or to get permission from the real boss to spend some money!

Bring cash and i will drop it off for you after the show on sunday night if you're in Melbourne!

Darren
0407 535 645
Darren@hookplastics.com.au

http://i297.photobucket.com/albums/mm235/gmvpss/Winters08_Bull05_5.jpg
http://i297.photobucket.com/albums/mm235/gmvpss/Winters08_Bull05_1.jpg
http://i297.photobucket.com/albums/mm235/gmvpss/VP001.jpg

GMVPSS
05-10-2008, 10:27 PM
Just got home from Melbourne AutoSalon and GMVPSS won the 'Top Judged ENGINEERING' award!

Attached are a couple of pics of the car and trophy.

Car is still for sale $40k turn key with everything as listed previously. Buy it now and race it next weekend or go to another show and have a chance of winning your own trophy.

Keen to get it out of my garage so give me a call and come and have a look at it.

Darren
0407 535 645
Darren@hookplastics.com.au

http://i297.photobucket.com/albums/mm235/gmvpss/Autosalon004.jpg
http://i297.photobucket.com/albums/mm235/gmvpss/Autosalon003.jpg

GMVPSS
08-10-2008, 04:09 PM
Due to a couple of people wanting to know if I would sell the car as a roller, I have had a think about it and worked out an offer for those people so you can fit your own driveline into the car if you choose.

Would suit VL Turbo motor, Holden V8 (aspirated, turbo or supercharged) or Small Block Chev V8. Chassis easily capable of running high 8sec passes with the right driveline.

Will Suit Super Sedan, Super Street, Super Gas, /MS and Pro Street classes. Chassis is straight and fast and only weighs 1120kg (2465Lb) Less driver with the Holden V8. VL Turbo motor would be much lighter than the Holden V8 in there now.

The car will come complete without the engine, pipes, converter or transmission. You will get the complete rolling car including Alloy Mark Williams diff centre, alloy driveshaft, new wheels and tyres, gauges, MSD 7AL-2 ignition, Delco EFI loom and computer, Mega 200 Delay Box ready to bolt your driveline straight into. I will even throw in a spare set of used rear tyres for the car!

Transbraked Glide, converter, 2 sets of pipes, 200Lt of fuel, Vacuum pump, weather station and all other pieces will then be offered for sale separately.

$30k ONO for roller. You will not build anything for this price or at this quality. Add it up with all the fibreglass and alloy components on the car plus the ¾ chassis, paint, gauges, seat, etc, etc and see for yourself

Darren
0407 535 645
Darren@hookplastics.com.au

GMVPSS
11-10-2008, 07:04 PM
With all the race meetings happening at your local track as we're coming into Summer now is the time to a buy a good reliable consistant race car so you can get out there amongst it!

Remember this is turn key deal, so you can pick it up from me and take it straight to your local track and go racing! There are no secrets or hidden deals. I will provide you with everything you need to go racing with the reliability and consistency that i have.

Dont spend 12~18 months building a new car that is going to cost you WAY over $40k to get it on the track. By this and go racing tomorrow! If you want to go faster than 9.9's, palm this engine off after a season or buy it as a roller and fit your own bullet, however with the car setup as it is now ready to race it is deadly consistant so why would you want to change it?

Darren
0407 535 645

GMVPSS
13-10-2008, 08:04 PM
Price update guys and gals. Got to get this thing out of the garage so give me a call have a chat. If the deal still sounds good and you're interested come and have a look and make me an offer!

$28k Rolling. No engine, pipes, trans and converter.

$38k Turn Key. Ready to race. No extras.

Give me a call and lets deal!

Darren
0407 535 645 AH
Darren@hookplastics.com.au

GMVPSS
16-10-2008, 08:48 PM
Take it now as a roller for $28k and you get everything listed except engine, transmission, converter and pipes. The lightweight alloy mark williams centre stays, alloy tailshaft stays and all fibreglass panels and gauges. Fit your own killer engine and go racing.

$38k turn key with everything to go to the track and race. Pick it up from my workshop and go straight to the track and have a good chance of going rounds! I will even throw in 40lt of fuel to get you started!

With the $20k race meeting at Calder coming up in the next month now is the time to buy it and give yourself the best chance of winning the event!

Darren
0407 535 645 AH
Darren@hookplastics.com.au