Congratualtions HAWKLS7-Motovation '09

[HOWQUICK]

Congratulations Tony on getting your awesome GTO to Motovation and taking second Outright in the HP Shootout Competition. Concidering it is an auto it is a great result for you.

Some photos of Tony's GTO...


http://www.marksworkshop.com.au/Pages/custom/GTO%20PIC.htm


Tony's car is the replacement that Mark put together to replace the V2 Monaro that was crashed injuring Mark and writing the car off. It is a total credit to Tony and his patience and desire to have one of the toughest, cleanest cars around. Hope you get to enjoy this one Tone and it gives you many miles of "entertainment"! I personally think the GTO is a far nicer car....

The car that Tony came runner upto is also prepared at Mark's Workshop

http://www.marksworkshop.com.au/Pages/custom/GTS%20PIC.htm

Both have ETP LS7 based 402" motors.

[EXCESSV]

here are the pics John :D

Drew and i spent quite a bit of time talking to Tony on saturday and watching the car run on the dyno....
this car is pure perfection!!!! :drool::drool::drool:
http://www.marksworkshop.com.au/Pages/custom/images/TONY%27S%20GTO%20E.jpg
http://www.marksworkshop.com.au/Pages/custom/images/TONY%27S%20GTO%20B.jpg
http://www.marksworkshop.com.au/Pages/custom/images/gto%20at%20show.JPG

[HOWQUICK]

here are the pics John :D

Drew and i spent quite a bit of time talking to Tony on saturday and watching the car run on the dyno....
this car is pure perfection!!!! :drool::drool::drool:


thanks for that!

He's a great little bloke that's for sure...

[vz300]

How GREEN is that grass..........


Great car very neat indeed great job to all involved.......

[korrupt]

How GREEN is that grass..........

There was grass in that photo ?

[Tre-Cool]

flash as engine bay, unique front bumper too.

[hsv364]

Congratulations !! To make so much HP as stated through an auto is very serious ...............

Simply awesome :bow:


Clinton

[hawkls7]

Id like to thank mark from mws for the speedy effort he has taken in rebuilding another car for me. he has taken extra care in all the shinny bits , and i am over joyed the car made it to motorvation . Id like to thank john from SQP . he has always been helpfull when i have asked questions, and has always given me a no bull answer . id also like to thank daniel from chipmaster for tuning my car , he has flown over several times to tune . hopefully he will be back in three weeks , when then we will fully tune the car with a manual , not a 4l80e with a 5000 stall , which is making it unsafe to tune.thanks guys:goodjob:

Id like to thank mark from mws for the speedy effort he has taken in rebuilding another car for me. he has taken extra care in all the shinny bits , and i am over joyed the car made it to motorvation . Id like to thank john from SQP . he has always been helpfull when i have asked questions, and has always given me a no bull answer . id also like to thank daniel from chipmaster for tuning my car , he has flown over several times to tune . hopefully he will be back in three weeks , when then we will fully tune the car with a manual , not a 4l80e with a 5000 stall , which is making it unsafe to tune.thanks guys:goodjob:

[STATIE]

Awesome looking car especially the engine bay.:goodjob:

You got some specs on it & what sort of numbers did it pull?

[ova400]

it must have been a huge effort for all those involved and the entire car is great,

May I ask what happened to the first 1??

[HOWQUICK]

it must have been a huge effort for all those involved and the entire car is great,

May I ask what happened to the first 1??

off course you can. It is no secret. The facts are that Mark crashed it at low speed on a test drive. The car went down an embankment on a country road and rolled onto it's side bending the car through the middle and injuring Mark at the same time.

The rest that floats around is Urban Myth.....

[2 cylinders shy]

Awesome effort to all involved :goodjob:
Love the engine bay.

[ATTNSEEKR]

Was a very neat looking car, and something that suprised me from the MWS camp, is that you drove it around... it sounded farken tuff as. any plans to run it before the auto comes out?

[KPWISHN]

Sublime car. I stood staring under the bonnet of it for a good ten minutes thinking......"I want"!

[ADAM 26]

How Much Power Did It Make??

[lee ls1]

wow what a enigne bay, what a car well done looks tops :goodjob:

[HOWQUICK]

Was a very neat looking car, and something that suprised me from the MWS camp, is that you drove it around... it sounded farken tuff as. any plans to run it before the auto comes out?

these cars are on display at the show but rest well assured they get driven plenty. Another urban myth just because they aren't seen at the track.

[KPWISHN]

How Much Power Did It Make??

I think it made high 800 rwhp or low 900 rwhp on the day. Can't remember exactly. Lots left in it, it would seem.

[Delco]

Glad it is all finally starting toi come together Tony after a very long haul , I flew out of town a few hours before moptivation started but was happy to hear the top three supercharged cars on the dyno were ones I had tuned for MWS all with a Howquick motor in them.

Rest assured guys all these top level cars like Tonys and the VE that took top HP honours are daily drivers that get given plenty of stick by the owners.

if we had of converted to a man for the show I am certain HawkLS7 would have taken out the honours , on the dyno during tuning we saw 970 rwhp through a high stall that was flashing to 5400 rpm , its making some serious mumbo for a streeter.
The VE GTS saw just over 1000rwhp through its manual but was not pushing as hard to get to that point as we were with the auto car of Tony's.

Back again in 3 weeks mate to get yours finished so you can enjoy it out on the road again.

[HOWQUICK]

Rest assured guys all these top level cars like Tonys and the VE that took top HP honours are daily drivers that get given plenty of stick by the owners.



VE is a Kalgoorlie guy that runs it to Perth and back regularly....

[hawkls7]

We are going to put the manual for tuning perposes and possibly next year we will have the manual for the show. but as a weekender ill put the auto once tuning is complete, and once im ready ill bring it to race, with the correct setup.The auto is a fully built 4l80e unit with all hard parts. it has been capable of handaling the hp very well.I will be driving it regually once complete but safely for street use it will be de tuned for safety .I cant wait to drive , especially with the stall at 5400 .

[VYSHSV8]

Congrats Tony on the result, was great chatting to you on the day and also saying g'day to Mark and Kath, seeing as we haven't caught up for a while..

Your car still has plenty left in it mate....and is 1 true tuff streeter:):):bow::bow:

Congrats again

Cheers
Drew

[seedyrom]

unique front bumper too.
if only Holden could have painted the rest of the car as well as the guy that did the bumper

[monaro_mad]

Seeing this car in the flesh is enough to give any coupe lover a chubby, throw in some of the girls hanging around it and... :)

By far the best blown LS there :goodjob:

[HOWQUICK]

We are going to put the manual for tuning perposes and possibly next year we will have the manual for the show. but as a weekender ill put the auto once tuning is complete, and once im ready ill bring it to race, with the correct setup.The auto is a fully built 4l80e unit with all hard parts. it has been capable of handaling the hp very well.I will be driving it regually once complete but safely for street use it will be de tuned for safety .I cant wait to drive , especially with the stall at 5400 .

what hasn't been said here is that Tony builds his own autos, made the drive for the blower and spend countless hours making all the bling pop the way it does including all the hand pollishing of all the alloy parts. He relocated all the ABS etc himself. It is far from just dropped at a shop and pay the bill.:goodjob:

Looking forward to a drve myself Tony.....:)

[ova400]

Where is the ABS??

[hawkls7]

the abs was moved below the brake booster unit near the steering nuckle. all the lines had to be re flared to suite, it was a pain but now it is easier to change plugs and it looks neater out the way.

[EXCESSV]

Seeing this car in the flesh is enough to give any coupe lover a chubby, throw in some of the girls hanging around it and... :):not just coupe lovers...any car lover would have to get a chubby from looking and hearing it.....pure porn!!!! :bow: :drool:

[hawkls7]

Here is a little go round video mark sent me , its the only thing ive got for now , its back at mws for the manual install and tuning. YouTube - BLACK HAWK GTO (http://au.youtube.com/watch?v=BlWGrumGOFA)


what hasn't been said here is that Tony builds his own autos, made the drive for the blower and spend countless hours making all the bling pop the way it does including all the hand pollishing of all the alloy parts. He relocated all the ABS etc himself. It is far from just dropped at a shop and pay the bill.:goodjob:

Looking forward to a drve myself Tony.....:)
If there was any body i would trust to drive my car john it would be you off coarse .

[VEJerry]

That is tough as , love it :goodjob:

[S2VYSS]

This car is a really credit to all those involved with the build!

:goodjob:

The intake is a gorgeous work of art!

:bow:

[rumpster1]

so angry my car could'nt make it there but nice car none the less :goodjob:

[nowUCme]

that thing is mental, engine bay looks killer, why can't they make them look like that from factory.

[hawkls7]

Congrats Tony on the result, was great chatting to you on the day and also saying g'day to Mark and Kath, seeing as we haven't caught up for a while..

Your car still has plenty left in it mate....and is 1 true tuff streeter:):):bow::bow:

Congrats again

Cheers
Drew
thanks drew it was nice talking to you at motorvation , thanks for the support at dyno, not being fully tuned i did not feel confident . Marks in the process of installing manual early next week , hope Daniel has booked his flight


not just coupe lovers...any car lover would have to get a chubby from looking and hearing it.....pure porn!!!! :bow: :drool:
Thanks for putting photos up great meeting you at motorvation . still havent worked out how to put up pictures . Maybee the moderators dont allow me yet i dont know!:vpo:

[motomk]

Thanks for putting photos up great meeting you at motorvation . still havent worked out how to put up pictures . Maybee the moderators dont allow me yet i dont know!:vpo:

The attachments feature does not work on the forum. You will need to get the pictures hosted on an external server. If you post up the links somebody will be along soon enough to fix them! ;)

[hawkls7]

The attachments feature does not work on the forum. You will need to get the pictures hosted on an external server. If you post up the links somebody will be along soon enough to fix them! ;)
thanks for the quick response

[Delco]

thanks drew it was nice talking to you at motorvation , thanks for the support at dyno, not being fully tuned i did not feel confident . Marks in the process of installing manual early next week , hope Daniel has booked his flight



Flights booked mate , keen to get yours completed

[VYSHSV8]

The attachments feature does not work on the forum. You will need to get the pictures hosted on an external server. If you post up the links somebody will be along soon enough to fix them! ;)

Yep they will be mate :)


Flights booked mate , keen to get yours completed

BBQ time :)

[hawkls7]

Its now time for tuning to commence . Id like to thank mark from MWS for the temporary conversion of installing a manual set up , and being very careful not scratching anything. Hopefully all goes well tomorrow and its intresting to see what it delivers cant wait , its going to be a stressfull day for me . Ps Daniel its all resting on you , Mark and kathrine :bow::bow:

[stroked senator]

love the engine bay mate, so hard to make a ls bay look so good bc of all the components. good power to, what boost was it on by they way

[hawkls7]

it should see around 22-23 psi

[hawkls7]

We have done tune all is good we have made 1110 rwhp at 5700 rpm . We have run out off spark , Will be doing more testing in the comming weeks . Iam overwhelmed with the great efforts that Mark from MWS , John from SQP , and daniel from Chipmaster have put together , they are top blokes . If your after top Quality service look no futher .

[lowhsv]

wow, wats it like to drive? thats a mental setup you have

[EXCESSV]

We have done tune all is good we have made 1110 rwhp at 5700 rpm . We have run out off spark , Will be doing more testing in the comming weeks . Iam overwhelmed with the great efforts that Mark from MWS , John from SQP , and daniel from Chipmaster have put together , they are top blokes . If your after top Quality service look no futher .awesome to hear mate :yahoo:
bet your over the moon :goodjob:

and yes those trio are the best in there fields in WA...maybe even in all of AUS :bravo:

[Stelth]

Congratulations Tony !

Awesome car you have there mate.

Power out put is amazing.

Now start working on the car to get some 400m runs in.


Well done to all involved. . . :goodjob:

[hawkls7]

here it is guys thanks again to all involved, little video and dyno run

://www.youtube.com/watch?v=4CFcPhmIDDM

[VYSHSV8]

Congrats on the result Tony, it sounds excellent mate..

Now to just get it to its full potential when you sort the spark problem :):)
YouTube - 1100rwhp GTO (Black Hawk) (http://www.youtube.com/watch?v=4CFcPhmIDDM)
Cheers
Drew

[IWARNDU]

hey man..i seen ya that night out the front of joy kitchen..got the silver clubby(R8TED R)..

sounded mint man..let me know if u wanna head out for a cruise mate..
BTW this car in the real is a absolute machine.. a credit to urself, Mark, John and Dan

[MISTRSS]

Every day i am looking at pictures and videos Mark has posted on you tube! 2009/10 car of the year all the way!

I will be leaving my car often in Mark, Katherine, John & Daniel's capable hands to complete my goals present & future.

Sorry John & Daniel for all my annoying calls & emails in the past. Will pay of eventually!

[hawkls7]

here is a dyno run at the psr show that was recently held at the burswood dome . very pleased with the 1000+ put down. took 3 trofies home , 1st place holden03-07, 1st monaro post 2000, 1st lsx supercharged 400ci ttp://www.youtube.com/watch?v=jWy5hXm7c8g

[VYSHSV8]

here is a dyno run at the psr show that was recently held at the burswood dome . very pleased with the 1000+ put down. took 3 trofies home , 1st place holden03-07, 1st monaro post 2000, 1st lsx supercharged 400ci ttp://www.youtube.com/watch?v=jWy5hXm7c8g
Was great to see the car run the 1000 hp mark Tony :):):) and she looks absolutely stunning as usual :)


Cheers
Drew

Ps ya daughter won with more HP

YouTube - BlackHawk GTO 1000rwhp Dyno run @ 2009 Perth PSR show (http://www.youtube.com/watch?v=jWy5hXm7c8g)

[T-bones Goat]

here it is guys thanks again to all involved, little video and dyno run

://www.youtube.com/watch?v=4CFcPhmIDDM
Very nice and clean build. I built my setup based off of a car that Daniel and his guys built. Mine is an ETP LS7 with a Procharger F-1R. It made 1018rwhp through the 4l80e. Do you mind telling a few details about yours. Compression? total timing at wot? Do you run a filter on that intake or is that just for dyno usage? I would love to have one but have no idea where to look. Can you point me in the right direction? Thanks for any help and once again VERY NICE.

[Tre-Cool]

I think the dyno intake is called a turbo bellmouth, but obviosly has a small 90 degree fitting on it.

[T-bones Goat]

So that is just for dyno use. I thought it was but figured I would see if there was some king of hood mod to use it. Thanks