xa coilovers

[UTESRULE]

i recently put the extreme a coilovers on my ve maloo i got the shop to put the rear wound down as far as they go and they did but the front can go lower than the back is this true

i have front 605mm from bottom of wheel to guard
and rear 620mm

i want 620 front and 605 rear

so is the coilover made for front lower than back

i thought they should be the same

cheers

[Clubb'N]

it seems stupid and un-aerodynamic to have the front higher.
Get the car level, or have the front slightly lower for better results imo.
Looks better to me personally.

[boyley]

mate my measurements are 645 front and back I in gods name dont know how you could put up with it that low, you must drive on runways only.

I've never lowered it to the stops so cant help sorry

[NefariousLS1]

:worthless:

[UTESRULE]

dont no how to post pics still new

[Pedders]

i recently put the extreme a coilovers on my ve maloo i got the shop to put the rear wound down as far as they go and they did but the front can go lower than the back is this true

i have front 605mm from bottom of wheel to guard
and rear 620mm

i want 620 front and 605 rear

so is the coilover made for front lower than back

i thought they should be the same

cheers

Hi
Most cars do not have the same curve in their front and rear wheel arches. This is why you often end up with different ride heights front to rear and the car still looking good.
In many cases when you try to match wheel arch heights you end up with the car being bum down due to a lesser curve in the rear wheel arch.
I suggest you check and see what the front to rear rake is at those heights. Its no good having matching wheel to guard measurements front and rear if it means that you are so low that you rip you exhaust off or damage the diff, crossmenbers etc.

Have a look at the rake and let me know.

Regards

Scott