Blown 540
17-08-2009, 10:04 PM
To many toys and projects and not enough time,something has to go and its this.
VZ ute travelled only approx 1500 k's.
Cast 408 with the best of everything and with the V7 capable of 1000hp or very close to it.
1000hp capable powerglide - 4500 stall.
Billet ind 9 " rear end with Detroit Locker,heavy duty driveshafts.
Over 100k spent,can produce receipts.
Cast block 408ci
Part grout filled.
Stroker crank.
4340 rods
Diamond forged slugs and rings,
Billet main caps.
ARP mains.
Blueprinted.
Ported big valve heads.
ARP 1/2" head studs.
Stainlles valves.
Roller rockers .
Molly pushrods .
Stainless head gaskets.
248 cam
Double row chain.
High volume oil pump.
High volume sump.
Engine oil cooler.
Supercharger oil cooler.
Fast manifold and throttle body.
V7 YSI Vortech.
Gilmer drive.
Large intercooler.
Water injection.
Tripple pumps 044's,FMU ect.
Wilson rails ,85 lb injectors.
MSD coils ,leads.
1-7/8 headers Di Filippo HPC coated
Twin 3.5 " Di Filippo HPC coated
Mick taylor built powerglide.
Transbrake.
Billet 9"rear,detroit locker.
Heavy duty drives.
Special order bilsteins in the rear.
Plus probably other bits that i cant think of now.
http://i307.photobucket.com/albums/nn315/blown408chev/IMG_0110.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/IMG_0071.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/IMG_0106.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/IMG_0108.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/100_0042-1.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/100_1436_0001.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/100_0992-1.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/100_0040.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/100_0985.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/100_0984.jpg
Still to be done
Needs to have tailshaft made up and fitted.
Fuel system needs finishing including painting surge tank and all wiring to pumps,most fittings and wiring included.
Lines from engine to tray need to be made.
VY computer and complete loom needs to be fitted.Included.
Cable foot throttle and cable needs to be fitted .Parts included
Fit radiator and wire davies craig fans.Included.Top radiator hose may need to be moved lower on header.
Vacuum line to fmu needs to be fitted.Included
1 psi switches for pumps need to be fitted .Included
Vacuum plumbing to blowoffs ect needs to be run.
Gear linkage to powerglide needs to be fitted.included but needs extending.
Finish piping engine oil plus supercharger oil coolers.Included
Mount and pipe remote oil filter.Included
Install water injection .Included.probably wont need to do this if it goes to a cool climate.
Various other small jobs, i cant think of anything thing else but will add iff i do.
Small section of front gaurd will need repainting and the front bar will need painting.
Will need tuning obviously when finished.
Comes with standard brakes and wheels and no NOS bottles.NOS brackets included but will need to be turned around.
Unregistered.
Pm me for further details or Ph 0411723113
Price $35,000
Buyer to arrange freight.
__________________
VZ ute travelled only approx 1500 k's.
Cast 408 with the best of everything and with the V7 capable of 1000hp or very close to it.
1000hp capable powerglide - 4500 stall.
Billet ind 9 " rear end with Detroit Locker,heavy duty driveshafts.
Over 100k spent,can produce receipts.
Cast block 408ci
Part grout filled.
Stroker crank.
4340 rods
Diamond forged slugs and rings,
Billet main caps.
ARP mains.
Blueprinted.
Ported big valve heads.
ARP 1/2" head studs.
Stainlles valves.
Roller rockers .
Molly pushrods .
Stainless head gaskets.
248 cam
Double row chain.
High volume oil pump.
High volume sump.
Engine oil cooler.
Supercharger oil cooler.
Fast manifold and throttle body.
V7 YSI Vortech.
Gilmer drive.
Large intercooler.
Water injection.
Tripple pumps 044's,FMU ect.
Wilson rails ,85 lb injectors.
MSD coils ,leads.
1-7/8 headers Di Filippo HPC coated
Twin 3.5 " Di Filippo HPC coated
Mick taylor built powerglide.
Transbrake.
Billet 9"rear,detroit locker.
Heavy duty drives.
Special order bilsteins in the rear.
Plus probably other bits that i cant think of now.
http://i307.photobucket.com/albums/nn315/blown408chev/IMG_0110.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/IMG_0071.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/IMG_0106.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/IMG_0108.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/100_0042-1.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/100_1436_0001.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/100_0992-1.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/100_0040.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/100_0985.jpg
http://i307.photobucket.com/albums/nn315/blown408chev/100_0984.jpg
Still to be done
Needs to have tailshaft made up and fitted.
Fuel system needs finishing including painting surge tank and all wiring to pumps,most fittings and wiring included.
Lines from engine to tray need to be made.
VY computer and complete loom needs to be fitted.Included.
Cable foot throttle and cable needs to be fitted .Parts included
Fit radiator and wire davies craig fans.Included.Top radiator hose may need to be moved lower on header.
Vacuum line to fmu needs to be fitted.Included
1 psi switches for pumps need to be fitted .Included
Vacuum plumbing to blowoffs ect needs to be run.
Gear linkage to powerglide needs to be fitted.included but needs extending.
Finish piping engine oil plus supercharger oil coolers.Included
Mount and pipe remote oil filter.Included
Install water injection .Included.probably wont need to do this if it goes to a cool climate.
Various other small jobs, i cant think of anything thing else but will add iff i do.
Small section of front gaurd will need repainting and the front bar will need painting.
Will need tuning obviously when finished.
Comes with standard brakes and wheels and no NOS bottles.NOS brackets included but will need to be turned around.
Unregistered.
Pm me for further details or Ph 0411723113
Price $35,000
Buyer to arrange freight.
__________________