4wd Dyno for Cross8/ XUV in Perth

[jono_xuv53]

where in perth is a good dyno for an XUV/ Avalanche to get tested on?

[HSV Listy]

where in perth is a good dyno for an XUV/ Avalanche to get tested on?

Just a side note just make sure you get the right sort of dyno to suit the car. For example the AWD dyno in Darwin would of potentially destroyed the gearbox if Chipmaster did not advise dont use that sort.
I can not help you with what sort to use but just a note that is all. Several guys have put their AWD on dynos so they will help and from reading dont expect the same numbers compared to rwd cars with the same mods. There was a full weight 10 second coupe 4 that just cracked 300awkw. Just to give you a idea thats all.

[Delco]

I dont know of one in perth , there are 4WD DYNOS around Perth but if you use one make sure they have a constant split program installed that is suitable for the Holden system , not all 4 WD split systems are the same , both mainline and Dyno Dynamics have such programs BUT they dont come std with the dyno usually and if the owner hasnt purchased them you may find there are issues with the transfer case.

[servo2605]

i don't know if they can do anything about tuning or not but, all star garage have a 4wd dyno if its just a power run that you want...

[hurricane ss]

I know Aaron from intune performance in bibra lake has a 4wd dyno have to check with him if it suits your car.Gd bloke at what he does and he wont tell you bullshit like what happens on here.

[EXCESSV]

I know Aaron from intune performance in bibra lake has a 4wd dyno have to check with him if it suits your car.Gd bloke at what he does and he wont tell you bullshit like what happens on here.is this the same Aaron that used to own D & T Performance in Wangara???

[dyno junkie]

I dont know of one in perth , there are 4WD DYNOS around Perth but if you use one make sure they have a constant split program installed that is suitable for the Holden system , not all 4 WD split systems are the same , both mainline and Dyno Dynamics have such programs BUT they dont come std with the dyno usually and if the owner hasnt purchased them you may find there are issues with the transfer case.

Xspeed in O'Connor have an AWD Dyno Dynamics.
Recently had our Turbo AWD Territory there.

[awddynotodd]

I dont know of one in perth , there are 4WD DYNOS around Perth but if you use one make sure they have a constant split program installed that is suitable for the Holden system , not all 4 WD split systems are the same , both mainline and Dyno Dynamics have such programs BUT they dont come std with the dyno usually and if the owner hasnt purchased them you may find there are issues with the transfer case.

Dan,

Our dyno's have, and only need 1 mode for testing AWD vehicles, we maintain identical road speed of each dyno bed, just like driving down the road, so no funny things happen.....We don't sting our users for functions that should be standard on AWD Dyno's.

There are 3 Mainline Dynolog AWD dyno's in Perth:
Maximum Motorsports
Racetorque Engineering
Bill Lee Automotive

I know Maximum and Bill Lee have previously tested Cross 8's.

[hurricane ss]

is this the same Aaron that used to own D & T Performance in Wangara???

No mate not the same bloke.He used to race overeast i think had a very very quick 6cyl supra engined race car[national records] Gd engine tuner

[XUV]

where in perth is a good dyno for an XUV/ Avalanche to get tested on?

If and when you do get ya car dyno'd :goodjob:
can ya let us know your results ?? ta .

[jono_xuv53]

If and when you do get ya car dyno'd :goodjob:
can ya let us know your results ?? ta .

will do mate:)

[Martin_D]

Dan,
Our dyno's have, and only need 1 mode for testing AWD vehicles, we maintain identical road speed of each dyno bed, just like driving down the road, so no funny things happen.....We don't sting our users for functions that should be standard on AWD Dyno's.


Thats the beauty of the Mainline AWD dyno. We have recently had ours installed and been deeply impressed with its flexibility. No special software modes, no tricky setup, just drive on and the software takes care of the rest. In a short time we have tested this with - R35 GTR, XUV, X8, R32 GTR, EVO X, STi, all perfect and seamless....letting the operator (me) get on with the job of tuning. The damn thing even graphs the drive torque split, which is 'uber cool' for the AWD train spotters :)
http://www.ls1turbo.com.au/pics/wr35tttorquesplit.jpg

[5.7heaven]

I know this is an old thread, but is this information still current? Chasing someone who has an awd dyno to get my Adventra tuned

[Resetar]

I would like to know this too if anyone can help. I also have an adventra