Maf extender

[wadevzss]

Is there a maf extension for a VZ , so that when i relocate the IAT sensor, i dont have to cut into the original wiring. This way i could cut into the extension wiring, and when i sell the car it can all go back to stock.

I will be moving the IAT to the front grille area as per tuner instructions. I have an OZTRACK mail order mafless tune, but am still using the original airbox with 2 hole mod and associated maf piping.

[WIKED]

VCM have exactly what you are looking for.

I used their cable as I also didn't want to cut into the loom.

http://www.vcm-suite.com.au/performance/electrical.html

Just so you know, these cables are around 12 inches long so you may have to extend it but it's better to do this than cut your existing loom.

[wadevzss]

I am really after some kind of extension to fit onto my factory maf plug. I was hoping to get one that splits into the part the fits into the maf, and the other to a IAT, so i can relocate it to the grille area. This would stop me splicing into the factory cable.

I was thinking about the VCM IAT extension, but as i want it to look as if the maf is still working, i want it to be still plugged in there.

Have seen LS2 heat soak reduction kits available in the US, where they have an aftermarket IAT that works far better than the factory unit.

Any ideas?

[JezzaB]

See if Harrop will sell one from their kits.

They come with the exact cable you are looking for as the IAT sensor is in the blower

[wadevzss]

Sourced one from Casper Electronics in the US. Heres a link for anyone else that needs one.

http://www.casperselectronics.com/store2/product_info.php?products_id=1108

Item was $63 AUD delived by airmail in 6-10 days.