OPTIMUS
19-03-2010, 06:12 PM
Wondering if anyone knows of an aftermarket manufactured rear hub? there are plenty of front hub and bearing makers but none for rears seemingly, reason i ask is rear left clipped one of those very slight curbs and ever since there has been a slight shimmy from that side wheel is long gone although had no visible or balancing issues so i figured it was driveshaft which ive replaced with one from wreckers (v6 one) to no avail so i figure the hub must be slightly tweaked. Any one had this before?
Holden want $330 was hoping for a lil cheaper as bearings will be replaced and will cost me atleast 2 hrs labour. Looked at replacing the whole trailing arm and wrecker wants $450. I should also ad wheel alignment is fine also not that it would cause much issue on the rear except for tyre wear.
Cheers,
Steve.
Holden want $330 was hoping for a lil cheaper as bearings will be replaced and will cost me atleast 2 hrs labour. Looked at replacing the whole trailing arm and wrecker wants $450. I should also ad wheel alignment is fine also not that it would cause much issue on the rear except for tyre wear.
Cheers,
Steve.