Workshop Manuals

[1Monaro]

Does anyone know where i can buy a Workshop Manual for a VE???

I wanted to know how to get the plastic peice of the back of the seats?

I might be able to answer some questions if i had one and not be the one asking all the time.

Cheers

[Wonky]

I believe they are now only available electronically and even if you can get hold of one they're very expensive ($700+??) as only meant to be available to dealers.

[1Monaro]

I believe they are now only available electronically and even if you can get hold of one they're very expensive ($700+??) as only meant to be available to dealers.

WTF!!!!! that's off the charts!!!! So at that price it could only be through Holden.

[blu ute]

go to this web site tradebit.com
wow the first useful thing i have done since been on this site.
cheers damo

[lease1]

I bought one from OS on CD for $19 delivered. Over 5000+ pages. They are out there if you know where to look.

[Ron SS]

"I wanted to know how to get the plastic peice of the back of the seats? "

What exactly do you want to remove?

[1Monaro]

"I wanted to know how to get the plastic peice of the back of the seats? "

What exactly do you want to remove?

I want to remove the large plastic cover on the back of the seat. It covers most of the back part of the seat.

I want to get access under the headrest as im installing DVD players.
Thanks

[Ron SS]

You push vertically down on the plastic cover. This releases two "fingers" at the top. The bottom section is held on by two plastic "thread type" clips. Once the top section is free of the fingers, the top section can be pivoted out and you will see the two lower plastic clips. You push the plastic cover to the left to release the left clip and then to the right to release the other.

The correct "dealer" way is to firstly pull on the plastic cover at the bottom and magically the two plastic clips come out, then slide the cover down to release the two fingers. ..however the dealer way won't work!

Be warned, once you pull the cover off as described ...top first then bottom ... it will wreck the plastic clips so buy two new ones when you put it back on. To put back, put the new clips in their grooves on the cover, put the top in first, then wiggle the bottom to line up the clip holes then bump the cover on at the bottom.

[1Monaro]

You push vertically down on the plastic cover. This releases two "fingers" at the top. The bottom section is held on by two plastic "thread type" clips. Once the top section is free of the fingers, the top section can be pivoted out and you will see the two lower plastic clips. You push the plastic cover to the left to release the left clip and then to the right to release the other.

The correct "dealer" way is to firstly pull on the plastic cover at the bottom and magically the two plastic clips come out, then slide the cover down to release the two fingers. ..however the dealer way won't work!

Be warned, once you pull the cover off as described ...top first then bottom ... it will wreck the plastic clips so buy two new ones when you put it back on. To put back, put the new clips in their grooves on the cover, put the top in first, then wiggle the bottom to line up the clip holes then bump the cover on at the bottom.


That is FANTASTIC thanks.... worked a treat. That would have saved me a could of hours work... very much appreciated:goodjob:

[steves87]

I tried looking for a torrent... but no luck:bawl:

[Smitty]

I bought one from OS on CD for $19 delivered. Over 5000+ pages. They are out there if you know where to look.

...curious
my Australian one is on a DVD as it contains 2.5gb of files
bigger than a CD can hold :confused:
and the other thing with mine is it only goes to MY09:bawl:

[macca33]

The OP's query was answered and as such, the thread has served its purpose.

People whom wish to attain pirated software do so at their own peril.

These forums neither advertise, nor facilitate any distribution of such material and any member caught using the forum to perform such tasks will be banned. :feedtroll:

regards