John_LS1
16-01-2011, 08:28 PM
With much regret i'm looking to sell my T56 conversion which i have been collecting parts for over the last 6 months. this conversion is 99% complete not just a box with shifter and clutch like some people sell on ebay.
Most parts are from a VZ SS and was told it had approx 40,000kms but i can't guarantee that as i took the previous owners word. in saying that all the parts are very clean and has been kept in storage not in the weather like a wreckers. Many parts are also new genuine Holden.
Whats included:
T56 Gearbox
Mal wood option 3 clutch and flywheel (sent detailed pics to an employee there and he tells me it looks in good nick)
ARP pressure plate bolts (brand new)
Mal wood shifter (brand new)
Mal wood braided line and remote bleeder (brand new)
VY SS gearknob and boot (brand new)
5 litres Transmax Z
HSV short shifter (brand new)
Slave cylinder with new bearing
Rear housing seal (brand new)
brass spigot and roller bearing spigot can use either (brand new)
hsv manual pedal set (brand new)
cross member
clutch pedal and bracket
master cylinder with reservoir and bracket
cruise control clutch switch and loom
traction control switch and surround (brand new)
gear boot insulator which bolts to floor (brand new)
VZ LS1 Full engine/trans loom RRP from holden is about $500 (brand new)
Pretty much everything is there. obvious things that are still needed is an ECU re-calibration and a manual brake pedal or trim the auto one.
This would idealy suit a VZ owner as i bought everything with the intention of fitting it to mine but all of it will easily fit a VT VX VY except the full engine loom which i have another cut off peice of loom for all the gearbox solenoids and switchs etc which could possibly be adapted to the auto loom.
Wanting $3500 which i have spent a bit more than that collecting everything not to mention doing all the research and time picking up parts from holden etc.
Located in Eltham, Victoria.
http://img.photobucket.com/albums/v205/john_xr6/VZ/IMG_3385.jpg
http://img.photobucket.com/albums/v205/john_xr6/VZ/IMG_3342.jpg
http://img.photobucket.com/albums/v205/john_xr6/IMG_3236.jpg
http://img.photobucket.com/albums/v205/john_xr6/IMG_3232.jpg
Most parts are from a VZ SS and was told it had approx 40,000kms but i can't guarantee that as i took the previous owners word. in saying that all the parts are very clean and has been kept in storage not in the weather like a wreckers. Many parts are also new genuine Holden.
Whats included:
T56 Gearbox
Mal wood option 3 clutch and flywheel (sent detailed pics to an employee there and he tells me it looks in good nick)
ARP pressure plate bolts (brand new)
Mal wood shifter (brand new)
Mal wood braided line and remote bleeder (brand new)
VY SS gearknob and boot (brand new)
5 litres Transmax Z
HSV short shifter (brand new)
Slave cylinder with new bearing
Rear housing seal (brand new)
brass spigot and roller bearing spigot can use either (brand new)
hsv manual pedal set (brand new)
cross member
clutch pedal and bracket
master cylinder with reservoir and bracket
cruise control clutch switch and loom
traction control switch and surround (brand new)
gear boot insulator which bolts to floor (brand new)
VZ LS1 Full engine/trans loom RRP from holden is about $500 (brand new)
Pretty much everything is there. obvious things that are still needed is an ECU re-calibration and a manual brake pedal or trim the auto one.
This would idealy suit a VZ owner as i bought everything with the intention of fitting it to mine but all of it will easily fit a VT VX VY except the full engine loom which i have another cut off peice of loom for all the gearbox solenoids and switchs etc which could possibly be adapted to the auto loom.
Wanting $3500 which i have spent a bit more than that collecting everything not to mention doing all the research and time picking up parts from holden etc.
Located in Eltham, Victoria.
http://img.photobucket.com/albums/v205/john_xr6/VZ/IMG_3385.jpg
http://img.photobucket.com/albums/v205/john_xr6/VZ/IMG_3342.jpg
http://img.photobucket.com/albums/v205/john_xr6/IMG_3236.jpg
http://img.photobucket.com/albums/v205/john_xr6/IMG_3232.jpg