FS : LS3 motor minus Block S.A.

[GenReaper]

I have an LS3 motor here minus block due to block being damaged.
Needs Lifters and gasket and rings and bearings to rebuild it.
May need top valley cover plate as well.
Has Reluctor wheel fitted to suit LS1 computer.
Comes with a VE sump.
Will throw in new Water pump to suit VE as well.
Can throw in cam which is a 236/242 .590/.610
Has PAC 921 valve springs included.
Comes with FAST 92mm big mouth throttle body as well as intake injectors etc.

Not looking to part it out atm.
Buyer to organise freight tho i may be able to come to an agreement with some sourcing of freight company.

I believe a bock is around $1600 so its a cheap way to setup a 600hp N/A motor or put it back to stock. Has only done about 3000kms.

Looking for $2500 ono.

contact via PM or phone 0413 662 125 best afte 4pm S.A time.

Cheers Brad.

[GenReaper]

Also comes with molly pushrods and underdrive balancer.
Selling due to clutch failure damaging rear of block so gone back to standard motor.

Can deliver free in Adelaide.

[Soopy]

You don't really have an LS3 motor, you've a bunch of parts. Used parts at that.
Why don't you say why there's no block?

[GenReaper]

Read post properly, i said in the first line because the block was damaged.
Reason for damage was due to a faulty textralia clutch causing bellhousing tangs on the block to be ripped off but i didnt want to bag peters clutches but considering you asked there is the answer.

Im guessing your not interested but thanks anyway.

[Dijm8]

if you do part out with it, ill take the throttle body, pm me if you do..thanks m8

[6.2L.Club]

Photos please, or send me your email and l will contact you

[GenReaper]

Details sent via pm.

[vl2di4]

can you freight to melbourne?

So its got heads and everything just missing block??

What power was it making with that cam?

[GenReaper]

Can freight to Melbourne at a cost yes.
Approx 600 at the flywheel with that cam
As stated needs lifters and ring/bearings and gaskets and block.
Top valley cover does have damage and will need replacing.

Photos here:

Manifold, injectors, 92mm TB
http://www.users.on.net/~danzig/DSC_0003.JPG

Pistons and main bearing caps and underdrive balancer.
http://www.users.on.net/~danzig/DSC_0004.JPG

Heads with PAC 921 valve springs.
http://www.users.on.net/~danzig/DSC_0005.JPG

Rocker covers, roller rockers, pushrodes and various bits.
http://www.users.on.net/~danzig/DSC_0007.JPG

Coils.
http://www.users.on.net/~danzig/DSC_0008.JPG

Valley cover, broken as stated, can send if u want it.
http://www.users.on.net/~danzig/DSC_0009.JPG

http://www.users.on.net/~danzig/DSC_0010.JPG

Bolts, fuel lines etc.
http://www.users.on.net/~danzig/DSC_0011.JPG

Camshaft.
http://www.users.on.net/~danzig/DSC_0012.JPG

Front engine cover.
http://www.users.on.net/~danzig/DSC_0013.JPG

Oil pump.
http://www.users.on.net/~danzig/DSC_0014.JPG

Sump and pickup.
http://www.users.on.net/~danzig/DSC_0015.JPG

[hazrd8]

Have you got the damaged block still

[GenReaper]

No, it was unsalvagable unless you want to make beer cans out of it.

[hazrd8]

Yeah I don't care how banged up it is if you have it im interested

[Othanus]

Do you still have the full rotating assembly?