HSV Avalanche/XUV Full Brake Kit For sale on Ebay

[chocco]

For those with a Adventra and Cross 8 and want to upgrade their brakes there is a full set of for sale on ebay including brackets, I don't have the money at the moment or else I would have jumped on them.

Hope this can help someone else out.

http://www.ebay.com.au/itm/Avalanche-Crewman-Ute-HSV-VY-VZ-Complete-brake-upgrade-slotted-rotors-cross-8-/200655332945?pt=AU_Car_Parts_Accessories&hash=item2eb7fd6651

[planetdavo]

Cheers for offering the forum an option. There's an issue though.
They've totally cocked up the diameters of these rotors, but by the (reversed) thicknesses given, these rotors are on absolute minimum front and rear, and will need replacing, so they aren't by any means cheap.

[chocco]

Cheers for offering the forum an option. There's an issue though.
They've totally cocked up the diameters of these rotors, but by the (reversed) thicknesses given, these rotors are on absolute minimum front and rear, and will need replacing, so they aren't by any means cheap.

All depends what you have and what you can get your hands on, just the front and rear cailper brackets from Holden are $750, rears $500 and fronts $250, the fronts you have to get from Holden, the rears you can get a PBR upgrade kit and get the bracket.

[planetdavo]

All depends what you have and what you can get your hands on, just the front and rear cailper brackets from Holden are $750, rears $500 and fronts $250, the fronts you have to get from Holden, the rears you can get a PBR upgrade kit and get the bracket.

Just letting the forum know there's the cost of four new rotors coming up if they go ahead. With new rotors and new pads to suit the cost will blow out over 2K, with second hand non-reconditioned calipers.
I've never seen this 4blok guy say anything's less than 4 star yet either! :eek:
As I said though, cheers for letting the forum know of this option if anyone is interested. :)

[stockergts]

You can get the rotors and pad slot cheaper than 2k I did this upgrade using ve front for a customer with the rear brackets from memory was 1800 drive out
The rear cradles you canbuy from amcap and they run the STD caliper and pads then just need a 49 rotor to go on