removing power steering pully

[ajs]

I did a search but could find the info required. Im up grading my pullies to 8pk for a pully upgrade for the harrop super charger.
How do you get the power steering pully off, there is an allen key head in the centre do you remove this to get the pully off, I cant budge it. I have done the rest of the pullies including the balancer.
Any help wold be great thanks Allan

[gaz05]

I did a search but could find the info required. Im up grading my pullies to 8pk for a pully upgrade for the harrop super charger.
How do you get the power steering pully off, there is an allen key head in the centre do you remove this to get the pully off, I cant budge it. I have done the rest of the pullies including the balancer.
Any help wold be great thanks Allan

It is only held with an interference fit, they just pull straight off but you need the right puller that clamps to the nose of the pulley, most automatic and power steer shops will have one, they will remove it in 5 mins.

[VX-300]

There's a raised cylindrical shoulder on the front of the pulley.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Instructions/R2010495.jpg

The special puller (kit pictured below, last pic) has a cylindrical boss on its main body.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Instructions/R2010493.jpg

You screw the central bolt most of the way out.
Then place the puller cylindrical boss against the pulley boss...end to end.
You then position each of the 2 collets over both bosses.
Over the 2 split collets you place the outer binding ring.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Instructions/R1010496.jpg

Rotate the central bolt and the pulley walks forwards off the power steering pump shaft.


There is another tool for installing the pulley onto the shaft.
This one is T&E 9542
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Instructions/R1010494.jpg

Puller Kit
KD Tools #2897
Power Steering & Alternator Pulley
Remover & Installer Kit.

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Instructions/KD-2897.jpg

[ajs]

Thanks guys. I will remove the power steering pump and get a local auto shop to remove the pully for me.
cheers Allan