VE Brembo rears

[bonners]

Hey guys, in the coming days I'm doing an order for rear Brembos for myself and a few others.

If you're interested, please send me a pm and I will give you more details. I don't want to turn this into a thread about what needs to be done etc or if it can be done. It can be done and I have all the info etc needed to get you the parts.

This is simply an offer to get the parts for you as I am already getting them for a few others. Due to the fact I am already getting them for others, I would really appreciate if you are interested to let me know straight away as I would like to do the order.

[phat_6ltr]

Pm sent :)

[hyperss82]

im interested can u pm the details

[bonners]

PM's replied.

[bonners]

Also, if you want front DBA 4000's for your Brembo's let me know. About $150 a rotor with the standard slots (not the new T3 spec slots).

[bonners]

Thanks to those who have ordered and paid. Anybody else needs to get in today.

[bonners]

Hey guys, a couple of people have PM'd some interest in these. I'm happy to order more for you if you want. Please send me a PM.

[Hi Octane]

^^Pm'd. Thanks in advance Bonners

[bonners]

^^Pm'd. Thanks in advance Bonners

Mate, please clear your PM's. I need your address asap.

[Hi Octane]

^Done , all clear.

[qikute83]

could you please pm me the details as i am unable to pm atm

Cheers

Dave

[bonners]

first orders have shipped. Some have already arrived in the country while others must be just about to.

[SS317]

Nice work Adam, big thanks for all your help

[Hi Octane]

Thanks Adam, looking forward to its arrival & fitting.

[BigMick]

Love your work Adam!

Can't wait to fit them :)

[bonners]

No worries guys. Remember if you want a set and want me to organise it just shoot me a PM

[bonners]

Guys, if you send me a pm about this, please make sure you can receive a reply. I have tried to send a few replies and keep getting quota exceeded etc.

Please clear out your storage prior to sending a pm

[maka5]

hahah sweet... i cant wait to put them on... :)

[SS317]

hahah sweet... i cant wait to put them on... :)

How did you go with your fronts?

[maka5]

How did you go with your fronts?

They are ready to go... waiting for the rears , then I'm gonna put them on together..

I cannot wait....

[SS317]

They are ready to go... waiting for the rears , then I'm gonna put them on together..

I cannot wait....

Haha yeah I'm keen as to get the rears on

[maka5]

i hate waiting lol.... You going to put "brembo"(or something else)decals on yours ...or just keeping them plain red..

[SS317]

I was going to put brembo in black but the stickers I got were a little small and the 2nd set I ordered never came, now I'm thinking of doing the outline of the Ve style ss badge

[maka5]

ahh ok coool... im sure ull think of something mint...
:)

[bonners]

Guys
There is one thing you need to do before fitting the rears

You need to swap the nipples with the crossover tube. Basically, you need to remove the nipples, unscrew the crossover tube and then reverse it. With the VE, the crossover tube needs to be the same side as the small piston. The small piston the one the rotor hits first in rotation.

See this pic
http://i153.photobucket.com/albums/s212/ZC_74/df540f43.jpg
This is how your rotor should have arrived. See how the nipples are the same side as the small piston? The crossover tube needs to be where those nipples are. Also, when you change the crossover tube, you need to make sure the rubber tube sits against the calliper. This will make sense when you try and fit the tube on.

Be sure not to cross thread anything. To get the crossover tube off, use a z10mm flare nut spanner. To get the nipples off, I used a 11mm socket. Make sure everything is done up tight but make sure you can get the nipples undone when bleeding

Any questions let me know

Also here is some pics of the items you get. Anybody want them let me know
http://i153.photobucket.com/albums/s212/ZC_74/e93d57d8.jpg

http://i153.photobucket.com/albums/s212/ZC_74/b9ac0557.jpg

[SS317]

I'm a happy man, thanks Adam
http://i814.photobucket.com/albums/zz61/SSV317/9d76adc9.jpg

[bonners]

You're welcome mate. I did the crossover change last night. Will take a pic and post when I get home from work

[phat_6ltr]

Thanx for the heads up mate. Will do
It today..

[Hi Octane]

Arrived this morning, Thanks Adam, great guy to deal with.

[Hi Octane]

Adam, cleared my inbox.

[jaykay]

Swapping nipples....:lol:

[Hi Octane]

Mounting balts arrived.


Thanks again Adam.

[bonners]

Swapping nipples....:lol:
Lucky my wife was out of the house when I did it...... :p

[SS317]

Anyone got the part number for the mounting bolts??

[bonners]

11515778

Let me know if you have dramas. I ordered them for others

[SS317]

11515778

Let me know if you have dramas. I ordered them for others

:bow: :bow: :bow: :bow:

[bonners]

Because I am having some PM problems, I'll note it here.

You probably knew already and did so, but I just need to remind those using the bolts I sourced for you or sourced yourself from holden with the part number I gave, that they require Loctite. I can get you OEM bolts that come with loctite but you'll pay nearly triple the price.

[SSVHM2.5]

[QUOTE=bonners;1998985]11515778

Let me know if you have dramas. I ordered them for others[/QUOT

I ordered the 11515778 bolts from Holden and they arrived today for the Redline Fronts that I purchased. on the packet it read they were for a trans Axle or something. The bloke on the Holden service desk said they were incorrect. Will these fit ok?

[keith reed]

The parts number for my bolts is the same as the one you mentioned. I have just tried the bolt into the calliper and it fits fine. Sorry I did not read your post properly. I tried the bolt into the rear brembo 4 pot calliper. I don't know if they are the same.

[bonners]

Supposed to be exactly the same. Screw into the rears fine as well.

1057

[SSVHM2.5]

Supposed to be exactly the same. Screw into the rears fine as well.

1057

Yeah thats them. Getting Protek to fit up tomorrow. You mentioned they need loctite, they should have some I would think??

Thanks for the response.

[bonners]

Just tell them they need it. I assume any workshop would have it