Air induction pipe for ls1

[motorin on]

I am looking at an Air Inuction Pipe-1 of the new smooth ones to replace the factory unit and want to know if anyone has tried 1 and do they make a difference.VCM and VPW both supply 1 and they give 2 different power gain figures
Will a new tune be needed to allow for the extra air being flowed.I am going to keep the MAF

[boggers007]

Both can be kept with factory tune, my old man runs a SS Inductions one on his VE and hasn't had a tune. Picks up a bit of a gain but tune will make it more worth while. Why not go a OTR that still retains the MAF?

[motorin on]

Both can be kept with factory tune, my old man runs a SS Inductions one on his VE and hasn't had a tune. Picks up a bit of a gain but tune will make it more worth while. Why not go a OTR that still retains the MAF?

-- I had a K&N filter put in the original air box last October,so I don't want to throw that money away

[RB30X]

What model car?

I've done some intake mods similar to what you're saying to a VX in my build thread.

[motorin on]

What model car?

I've done some intake mods similar to what you're saying to a VX in my build thread.

ok thank's for letting me know--I will have a read of it

[motorin on]

I will need to make sure whatever I buy has the fitting for the Crank Sensor and look further into the 2 hole mod to the air box

[VZ_V8]

I will need to make sure whatever I buy has the fitting for the Crank Sensor and look further into the 2 hole mod to the air box

The crank sensor???? :confused:

Do you mean the IAT sensor?? If your going to get the pipe you might as well do the two hole mod as well, it can only be of benefit.

[motorin on]

The crank sensor???? :confused:

Do you mean the IAT sensor?? If your going to get the pipe you might as well do the two hole mod as well, it can only be of benefit.yes sorry-didn't know what it is called it is just in the original intake pipe.
I have been trying to find a thread on the 2 hole mod to check what needs to be done and how,just to confirm what I think it is

[motorin on]

OK-I finally found the 2 hole mod thread-so I won't need to waste anyone's time pointing me in the right direction-Thank's to those who would have helped me out

[VZ_V8]

yes sorry-didn't know what it is called it is just in the original intake pipe.
I have been trying to find a thread on the 2 hole mod to check what needs to be done and how,just to confirm what I think it is

This has all you need to know... 2 HOLE MOD DIY (http://swingtan.customer.netspace.net.au/2hole.html)