HORNY8
06-06-2012, 07:49 PM
Hey guys, ive just had my Motor built and now due to family i have to let it go. The engine has only just been run in and done less than 1000kms.
Specs.
* Lq9 Cast iron block
- 9.25:1 comp.
- 365ci
- Race Prepped Block, (bottom Grout filed, Massively Ported oil galleries etc)
- Prepped Crank
- Fully balanced, blue printed and stroke indexed.
- Torque Plate Honed
- Chemically cleaned
- Line Bored and Hone Main Journals
- Deck Block
- Heavy duty FLex plate.
- 25% Under drive balancer
- Forged Dished probe pistons
- Total seal rings
- H-Beam Scat Rods
- ARP L19 Rod bolts
- Hardened Race bearings (Bigend and mains)
- Ported Oil pump
- Double Row timing chain
- ARP main studs
- Total Seal Race Rings
- ARP balancer bolt
- ARP cam bolts
- Durabond Coated cam bearings.
- 218/224 @ 114lsa Camshaft
- Chrome moly push rods
- ISKY Valve spring, retainers and locks.
- Ported LS2 243 Heads
- ARP head Bolts
- CRANE 1.8 Adjustable Roller rockers.
- Starr 84mm Throttle Body.
- LS6 Manifold.
- 2-bar Map sensor.
- Custom 8.5Lt baffled sump.
- On run-in tune Vehicle made 408rwkws and massive torque on 10psi of turbo boost running through a big stall and T400 Has potential to make great power
- Engine was built By WALKOM PERFORMANCE ENGINES and will be supplied with FULL SPECIFICATION BOOKLET.
- Engine will be sold from Throttle to sump.
-this is genuine reason for sale. Asking. $8500ono can help with shipping.
any enquires please contact me.
- Graeme
Specs.
* Lq9 Cast iron block
- 9.25:1 comp.
- 365ci
- Race Prepped Block, (bottom Grout filed, Massively Ported oil galleries etc)
- Prepped Crank
- Fully balanced, blue printed and stroke indexed.
- Torque Plate Honed
- Chemically cleaned
- Line Bored and Hone Main Journals
- Deck Block
- Heavy duty FLex plate.
- 25% Under drive balancer
- Forged Dished probe pistons
- Total seal rings
- H-Beam Scat Rods
- ARP L19 Rod bolts
- Hardened Race bearings (Bigend and mains)
- Ported Oil pump
- Double Row timing chain
- ARP main studs
- Total Seal Race Rings
- ARP balancer bolt
- ARP cam bolts
- Durabond Coated cam bearings.
- 218/224 @ 114lsa Camshaft
- Chrome moly push rods
- ISKY Valve spring, retainers and locks.
- Ported LS2 243 Heads
- ARP head Bolts
- CRANE 1.8 Adjustable Roller rockers.
- Starr 84mm Throttle Body.
- LS6 Manifold.
- 2-bar Map sensor.
- Custom 8.5Lt baffled sump.
- On run-in tune Vehicle made 408rwkws and massive torque on 10psi of turbo boost running through a big stall and T400 Has potential to make great power
- Engine was built By WALKOM PERFORMANCE ENGINES and will be supplied with FULL SPECIFICATION BOOKLET.
- Engine will be sold from Throttle to sump.
-this is genuine reason for sale. Asking. $8500ono can help with shipping.
any enquires please contact me.
- Graeme