Part number for HSV VE2 triple gauge pod

[evil_ss]

Does anyone have the part numbers for the plastic pod trim, the bracket and the harness with the yellow end shown here
http://jhp.com.au/holdenve/InteriorAccessories/e3-gauges2-h.jpg

[Wonky]

I'll check my email when I get home to see if I've still got any/all that info I got when I got my E3 pod and gauges from ebay but from memory all up it came to $1600+ from dealer. :shock:

[evil_ss]

I'll check my email when I get home to see if I've still got any/all that info I got when I got my E3 pod and gauges from ebay but from memory all up it came to $1600+ from dealer. :shock:

Much appreciated mate.
So far I have the vents, ducting, 3x gauges, gauge mounting bracket, and the control box, so all I need now is the trim and the wiring harness that plug into the control box wit yellow end

[Wonky]

Unfortunately I only ever got the S1 part breakdown but did get told that at that time (Oct 2011) there was as yet no individual part breakdown for the E3 stuff and the complete kit and caboodle was $1790 + GST.

Saying all you need now is the trim and .......... is probably a bit of an understatement because that trim, assuming you mean the one which holds the 3 gauges, is probably about the most expensive piece and may only be available to you if you or someone can supply an E3 VIN and build number. Some dealers may even want to see an E3 missing that bit or with it somehow damaged before they'll sell you a new one. Have you got the older white faced gauges or nicer (IMHO) black ones?

There was a fairly recent thread re the special harness needed - I remember because I quoted the official part numbers for the harnesses in it. Will see if I can find it for you.

[Wonky]

For info on the harness see http://www.ls1.com.au/forum/showthread.php?97140 posts #139 on. :)

[VX-300]

, so all I need now is the trim and the wiring harness that plug into the control box wit yellow end

Both internal harnesses are the same for E2 & E3 as for VE HSV
12H-060601 For module to all 3 gauges harness
12H-060602 For module main harness with yellow group connector

Triple Gauge Binnacle Housing for VE HSV & E2 is B06-060601
Triple Gauge Binnacle Housing for E3 is 92250837 (no HSV number available).

[evil_ss]

Unfortunately I only ever got the S1 part breakdown but did get told that at that time (Oct 2011) there was as yet no individual part breakdown for the E3 stuff and the complete kit and caboodle was $1790 + GST.

Saying all you need now is the trim and .......... is probably a bit of an understatement because that trim, assuming you mean the one which holds the 3 gauges, is probably about the most expensive piece and may only be available to you if you or someone can supply an E3 VIN and build number. Some dealers may even want to see an E3 missing that bit or with it somehow damaged before they'll sell you a new one. Have you got the older white faced gauges or nicer (IMHO) black ones?

There was a fairly recent thread re the special harness needed - I remember because I quoted the official part numbers for the harnesses in it. Will see if I can find it for you.
Hi wonky I have the black face e3 gauges. Thanks a lot for the input

[evil_ss]

Both internal harnesses are the same for E2 & E3 as for VE HSV
12H-060601 For module to all 3 gauges harness
12H-060602 For module main harness with yellow group connector

Triple Gauge Binnacle Housing for VE HSV & E2 is B06-060601
Triple Gauge Binnacle Housing for E3 is 92250837 (no HSV number available).
Thank you very much! Lets see if I can purchase these without a VIN

[evil_ss]

Both internal harnesses are the same for E2 & E3 as for VE HSV
12H-060601 For module to all 3 gauges harness
12H-060602 For module main harness with yellow group connector

Triple Gauge Binnacle Housing for VE HSV & E2 is B06-060601
Triple Gauge Binnacle Housing for E3 is 92250837 (no HSV number available).
I now have a price and ETA for the harness, but just so others are aware the E3 part number was not recognised by the dealers

[Wonky]

As I suspected. The complete E3 centre binnacle with gauges I bought had part no 92242959 on the back, so maybe give that a try too??? :confused: At the time (Oct 2011) that number wasn't in my dealer's system but maybe it is now. I put the E3 gauges in an E1 pod then sold the E3 binnacle and vents etc on here to a forum member interstate.