No spark on VR 304

[350 fj40]

Hey guys ive put a VR 304 into landcruiser ive used an interface loom, put a memcal in to remove the VATS. It now turns over but im not getting any spark?

Ive tried putting power straight to the coil and I still get nothing. Am I right in saying even with VATS removed I need to run an ignition control module?

Any ideas where I should be looking? or things to try to eliminate things?

Thanks in advance!

[bush_basha]

Pretty sure you would, normally there's the coil behind the manifold and the ignition module on the right side strut tower silver thing.

[Micks]

Reckon the transistor Ign. module is the prob!

[VX-SS-383]

Are you using the bcm ? it wont start without it even with the anti theft turned off
ive tried it before.
Def need the module lol it aint going to start without it.

[350 fj40]

Are you using the bcm ? it wont start without it even with the anti theft turned off
ive tried it before.
Def need the module lol it aint going to start without it.

Yeah figured as much with the ignition module haha but the BCM? The memcal I've bought specifically says it means it can be run without needing to hook up a BCM?

[Micks]

EFI iron block won't work without the transistor assisted ignition module regardless of VATS or No VATS!!

[VX-SS-383]

Unplug the bcm and it wont fire even with anti theft disabled.
You could prob bypass it but you will lose the other functions.