Power steering pump return line fitting

[Boony405hp]

Hey lads,

I am chasing where I could get this return line fitting for the power steering pump. I think a chain may have been against it when the engine was lifted and the base and o ring part are slightly out of whack. Does anyone know where or who would sell this? Seems to be a common fitting but I don't want to have to buy a whole pump which most places are only interested in doing.

http://img.photobucket.com/albums/v215/Boony405hp/Mobile%20Uploads/image_zpsaau28blj.jpg (http://smg.photobucket.com/user/Boony405hp/media/Mobile%20Uploads/image_zpsaau28blj.jpg.html)

Cheers, Dave

[Peter B - CV8]

Wreckers ??

[IJ.]

That's not the return it's the Inlet, they can be straightened if you're careful, find a piece of bar that fits inside (3/8 extension from memory) and as long as it isn't kinked you can pull it back to where it needs to be, I had to bend mine to a different position to mount the reservoir on the body away from the engine.

[Toddler78]

That's not the return it's the Inlet, they can be straightened if you're careful, find a piece of bar that fits inside (3/8 extension from memory) and as long as it isn't kinked you can pull it back to where it needs to be, I had to bend mine to a different position to mount the reservoir on the body away from the engine.

And if it is kinked use a shifter and tighten to the circumfrence of the pipe where it is at its widest and as you straighten it turn the shifter back anď forth. That will stop it kinking more and help get it back to round.