Rear Crossmember Cradle Bush bolts

[NeddyBear]

Recently has anyone purchased the 2 bolts that fasten down the rear Crossmember Cradle Bushes to the floor.

[whitels1ss]

Buddy, firstly, welcome to the forum!

But sorry, I don't understand what you are asking. :confused:

So members can assist you better, please could you explain exactly what you are seeking to find out?

Is it the size of the bolts, where to buy them, how much to tension them, part numbers or exactly what else do you need to know? :cheers:

[surfwagon]

They are torque to yield bolts so need replacing if loosened or removed.

[NeddyBear]

Sorry, what I meant was are they still available from Holden.

[Smitty]

2....?

I thought there were 4

[NeddyBear]

Nope just the 2, one either side for the Chassis Cradle Bush mounts.
I'll ride over to Holden today and ask, phoning them is a pain.

http://i1255.photobucket.com/albums/hh628/KustomKulture62/Chassis%20Cradle%20Bush%20Fitting%20%2004.03.17%20-%201_zps8bqs8muq.jpg (http://s1255.photobucket.com/user/KustomKulture62/media/Chassis%20Cradle%20Bush%20Fitting%20%2004.03.17%20-%201_zps8bqs8muq.jpg.html)
http://i1255.photobucket.com/albums/hh628/KustomKulture62/31f291f4-f60d-41e1-8562-405187a411a0_zpschtmseei.jpg (http://s1255.photobucket.com/user/KustomKulture62/media/31f291f4-f60d-41e1-8562-405187a411a0_zpschtmseei.jpg.html)

[motomk]

I am not a mechanic so probably wise to replace them anyway.
This is a VX11-VZ car? Looks like 3 bolts and plus another one through the middle bush? Are they Torque to Yield?

[NeddyBear]

Thats right 3 small bolts to hold on the cover torqued to 70Nm and a M14 x 1.5 X 177 bolt through the centre of the bushes torqued down to 125Nm.
How this, in the whole of Australia I managed to buy the last 2, now to wait a week for them to arrive from Melbourne.
Its good the bushes last as long as they do, these new bushes and bolts will see out the rest of the car's life.