nemesis5
07-06-2004, 10:47 PM
A little off topic for ls1 forums, but someone might be after something a bit special :)...
Time for a bit of a change, and thinking of moving up to its bigger brother for my morel's to squirm off, so my TRU 2.100 (http://www.trutechnology.com/t_series.htm) 2channel is up for sale
In absolutely flawless condition, i could package it up and it'd look like it just came out of the box :) of course works perfectly, more pics can be arranged if requested, and if in vic an audition can be arranged as its still in my car
Independent reviews of the amp...
DB Don's review (http://pub26.ezboard.com/fcaraudioforum87927frm23.showMessage?topicID=330.t opic)
(extract)1 ohm stereo @ 50 hz -Power per channel=300.80 WRMS...1 ohm mono @ 50 hz -Power bridged=604.35 WRMS....5 ohm mono @ 50 hz -Power bridged= 798WRMS (not recommended)
Mobile Entertainment review (http://www.trutechnology.com/feature/mobile_entertainment.pdf)
(extract)172WRMS x2 into 4ohms - 260WRMS x2 into 2ohms - 484WRMS into 4ohm bridged
Amp details and rated power specs...
Model: T-2.100
Channels: 2 CH
Frequency Response: 10Hz ~ 45KHz ±1dB
Rated Power: 14.4 Volts DC
T.H.D.: < 0.05%
4 Ohm RMS: 100W x 2
2 Ohm RMS: 200W x 2
4 Ohm Bridged: 400W x 1
S/N Ratio: > 100dB
CH Separation: > 70dB
Input Sensitivity: 0.16mV ~ 4 Volts
Damping Factor: > 400
Efficiency: 65.70%
Fuse Requirement: (2) 30 Amp
Power Supply: 11 ~ 16 Volts DC
High Pass @ 18dB / oct: 50Hz ~ 500Hz
Low Pass @ 18dB / oct: 50Hz ~ 500Hz
Remote Bass Knob: Yes
Bass Boost: Yes
Dimensions: (L x W x H): 12 5/8" x 10 5/8" x 2 3/8"
Weight: 8 1/2 lbs. / 3.9 Kg
some extra info....
- Broad Range 2 & 4 CH Class AB Amplifiers
- Constant Rated RMS Power Output until Thermal Shutdown
- 2 oz. “Pleated Hole” PC Board
- High Current Unregulated Bi-Polar Power Supply
- Hand Soldered 10 Gauge Power Wire on to the PC Board
- Discrete Amplifier circuitry
- PROPRIETARY RF grounding techniques
used for Improved Reliability and HF noise rejection
- ( 2 ) Differential pairs of complimentary input transistors
- ( 8 ) ON® TO-3 Metal case audio output devices
- ( 8 ) I.R.® HEXFET® Power Inverter for Efficiency
- ( 2 ) Power Transformers
- ( 4 ) 2,200mf 50 Volt Capacitors on Rails
- ( 2 ) sets of High-Speed rectifier diodes
- Symmetrically mounted heat generating parts
- 18dB Hi/Low pass filter (50Hz ~ 500Hz)
- Thru Output (RCA: Not affected by X-over or Gain)
- Variable Low Frequency Boost Circuit (T-2.100)
- Optional Remote Bass control knob (T-2.100)
- 4 Gauge Power/Ground Input
- 8 Gauge Speaker Wire Output
- Hand Built in California, U.S.A.
http://www.trutechnology.com/images/full_view/t_series/t2100/t2100_001.jpg
RRP of the amp is around the $1000 mark, so its not a cheap amp, obviously underrated (as both reviews proved, by almost half!) and build quality and construction is brilliant, like i said above, only selling to upgrade to its big bro' model :) taking offers, but anything half or under will be ignored, and yes it comes with the original box and packaging with its protective bag and user manual
:cool:
Time for a bit of a change, and thinking of moving up to its bigger brother for my morel's to squirm off, so my TRU 2.100 (http://www.trutechnology.com/t_series.htm) 2channel is up for sale
In absolutely flawless condition, i could package it up and it'd look like it just came out of the box :) of course works perfectly, more pics can be arranged if requested, and if in vic an audition can be arranged as its still in my car
Independent reviews of the amp...
DB Don's review (http://pub26.ezboard.com/fcaraudioforum87927frm23.showMessage?topicID=330.t opic)
(extract)1 ohm stereo @ 50 hz -Power per channel=300.80 WRMS...1 ohm mono @ 50 hz -Power bridged=604.35 WRMS....5 ohm mono @ 50 hz -Power bridged= 798WRMS (not recommended)
Mobile Entertainment review (http://www.trutechnology.com/feature/mobile_entertainment.pdf)
(extract)172WRMS x2 into 4ohms - 260WRMS x2 into 2ohms - 484WRMS into 4ohm bridged
Amp details and rated power specs...
Model: T-2.100
Channels: 2 CH
Frequency Response: 10Hz ~ 45KHz ±1dB
Rated Power: 14.4 Volts DC
T.H.D.: < 0.05%
4 Ohm RMS: 100W x 2
2 Ohm RMS: 200W x 2
4 Ohm Bridged: 400W x 1
S/N Ratio: > 100dB
CH Separation: > 70dB
Input Sensitivity: 0.16mV ~ 4 Volts
Damping Factor: > 400
Efficiency: 65.70%
Fuse Requirement: (2) 30 Amp
Power Supply: 11 ~ 16 Volts DC
High Pass @ 18dB / oct: 50Hz ~ 500Hz
Low Pass @ 18dB / oct: 50Hz ~ 500Hz
Remote Bass Knob: Yes
Bass Boost: Yes
Dimensions: (L x W x H): 12 5/8" x 10 5/8" x 2 3/8"
Weight: 8 1/2 lbs. / 3.9 Kg
some extra info....
- Broad Range 2 & 4 CH Class AB Amplifiers
- Constant Rated RMS Power Output until Thermal Shutdown
- 2 oz. “Pleated Hole” PC Board
- High Current Unregulated Bi-Polar Power Supply
- Hand Soldered 10 Gauge Power Wire on to the PC Board
- Discrete Amplifier circuitry
- PROPRIETARY RF grounding techniques
used for Improved Reliability and HF noise rejection
- ( 2 ) Differential pairs of complimentary input transistors
- ( 8 ) ON® TO-3 Metal case audio output devices
- ( 8 ) I.R.® HEXFET® Power Inverter for Efficiency
- ( 2 ) Power Transformers
- ( 4 ) 2,200mf 50 Volt Capacitors on Rails
- ( 2 ) sets of High-Speed rectifier diodes
- Symmetrically mounted heat generating parts
- 18dB Hi/Low pass filter (50Hz ~ 500Hz)
- Thru Output (RCA: Not affected by X-over or Gain)
- Variable Low Frequency Boost Circuit (T-2.100)
- Optional Remote Bass control knob (T-2.100)
- 4 Gauge Power/Ground Input
- 8 Gauge Speaker Wire Output
- Hand Built in California, U.S.A.
http://www.trutechnology.com/images/full_view/t_series/t2100/t2100_001.jpg
RRP of the amp is around the $1000 mark, so its not a cheap amp, obviously underrated (as both reviews proved, by almost half!) and build quality and construction is brilliant, like i said above, only selling to upgrade to its big bro' model :) taking offers, but anything half or under will be ignored, and yes it comes with the original box and packaging with its protective bag and user manual
:cool: