PDA

View Full Version : My latest project - V10 Viper engine pigging out on NOS



WOT THE
09-06-2004, 08:58 PM
Some may know that I have had a few cars, many of them a tad angry, however I am working on a masterpiece.

68' Chev Camaro SS 2 door, mini tubbed, lots of goodies on the way.

I have secured a very low mileage V10 Viper donk, putting out over 500HP now. However I am putting together a 10 fogger kit injecting 25HP per cylinder.

I have a few more issues to deal with, but will post some pics soon as gas setup is in place. I am aiming for around 900HP once installed. May even see a custom manifold with a big blower sitting on top, depending on the pennies.

I have a killer paint job lined up.

Won't be finished before Xmas, but coming to a track near Ipswich soon after. Shoud pull interesting times once sorted.

The LS1 may be gone, :( , but soon :D will be here.

Will keep you posted.

SPJ
09-06-2004, 09:12 PM
That is off the hizzle :eek:

Crazy focker! love it!!

VRIIClubby
10-06-2004, 09:11 AM
drewlling and crying at the same time...


Wheres mine... *sobs and walks off*

billygoatgruff
10-06-2004, 09:31 AM
You will have a blast if you find a good way to launch that car. Buddy over in the states has a supercharged V10 viper with NOS and edit. Can't launch to save his life. Ran 10.8 spinning through a few gears with no gas. Ran 10.2 with gas and with absolutely no traction. You will have a good time when you get that thing to hook. Good luck. By the way how big of tyres are you going to put on the back of that thing?

RICHO
10-06-2004, 10:35 AM
Since you're playiong with a Viper Engine here's a nice little package for you from Hennessey Motorsports.

www.hennesseyperformance.com

Venom 1000 Twin Turbo Upgrade

Power Output:

800 - 950+ Rear Wheel HP (900 - 1,100+ Flywheel HP)
900 - 1,000+ Rear Wheel Torque (1,000 - 1,200+ Flywheel Torque)
Note: Power output depends on several factors including year/model Viper, fuel octane rating and desired application. Please call for more information.

Acceleration (Optional Automatic Transmission):

0-60: 1.85 sec. *
1/4 mile (with NOS): 8.93 sec. @ 149.65 mph *
1/4 mile (no NOS): 9.66 sec. @ 146 mph *

Acceleration (Stock 6-Speed Transmission):

0-60: 2.35 sec. *
1/4 mile (with NOS): 9.52 sec. @ 156+ mph *
1/4 mile (no NOS): 10.01 sec. @ 146 mph *

Note: * Denotes Viper World Record



Includes:

Stroker Motor: 510 CID (92-02) or 522 CID (03 & up)
JE Forged Aluminum Pistons (8.0 - 9.2: compression)
JE Forged Steel Wrist Pins
Manley Pro Forged Steel Rods
ARP 2000 Rod Bolts
Custom Machined Factory Crankshaft (exchange)
Polydyn Coated Rod Bearings
Computer Balanced Rotating Assembly
Twin Garrett Ball Bearing Turbos
Front Mounted Intercooler
Polished Stainless Steel Inlet Tubes
Custom Intercooler Hoses with T-Clamps
Stainless Steel Turbo Headers
Stainless Steel Turbo Down Pipes
External Wastegates
3 in. Stainless Steel Exhaust System
Ported/Polished Cylinder Heads with Stainless Steel Valves, Upgraded Valve Springs, Titanium Retainers, 3-Angle Valve Job
T&D 1.7 Ratio Shaft Rockerarms
Hardened Pushrods
Upgraded Hydraulic Lifters
Upgraded Fuel Injectors
Upgraded Fuel Rails
Upgraded Fuel Pump & Fuel Lines
Upgraded Fuel Pressure Regulator
Centerforce Clutch Upgrade
VDO Boost Meter
Mobil One 15/50 Synthetic Oil & Mobile One Filter
All Necessary Gaskets & Fluids
Air/Fuel Calibration
Exclusive Venom 1000 Twin Turbo Exterior Emblems
Exclusive Hennessey Emblem on Rear Bumper
Serial Numbered, Limited Edition Dash Plaque
Professional Installation
Road Testing & Chassis Dyno Testing
Allow 12 weeks for installation with prior appointment

Available for:

2003 - 2004 Viper SRT10
2004 Ram SRT10 Truck
1996 - 2002 Viper GTS, ACR & GT2
1992 - 2002 Viper RT10

:eek: :eek: :eek: :eek: :eek:

VPIIV8
10-06-2004, 04:00 PM
cha ching....

boxhead
11-06-2004, 11:41 PM
Here is a link to a cobra ith the dodge Viper V10 engine, i think this car is to be raffled off pretty soon.
http://www.clubcobra.com/photopost/showphoto.php?photo=346&password=&sort=1&cat=all&page=1

strife
11-06-2004, 11:43 PM
[QUOTE=RICHO]Since you're playiong with a Viper Engine here's a nice little package for you from Hennessey Motorsports.
QUOTE]

I understood Hennessey was on the outer with some very bad customer dealings

WOT THE
12-06-2004, 06:02 AM
boxhead,

Awesome Cobra mate, that thing would fly.

payaya
12-06-2004, 07:26 AM
i wouldnt want to have that car in aussie!

considering if we go 3km/h over the limit we can get a speeding, wish our goverment were taken over by a bunch of yanks! With just road rules that is.

LX346
10-01-2005, 10:16 AM
Any update on this project, thing would be crazy.

blownvn
10-01-2005, 12:11 PM
i wouldnt want to have that car in aussie!

considering if we go 3km/h over the limit we can get a speeding, wish our goverment were taken over by a bunch of yanks! With just road rules that is.

Maybe we can get the yanks to invade Australia? Might be some fierce battles around Lakemba and Bankstown though :lol:

Then we can all drive around in US muscle cars, buying gas for $3 or so a gallon, and actually have the right to bear arms so no-one else can invade us. :rolleyes:

SS VX
10-01-2005, 12:25 PM
Then we can all drive around in US muscle cars, buying gas for $3 or so a gallon, and actually have the right to bear arms so no-one else can invade us. :rolleyes:

Hey, works for me!