PDA

View Full Version : VH SLE 1982 Series 2 V8 Worked.



SirJon
24-09-2004, 10:46 AM
VH SLE 1982 Series 2
192,890km
Registered till June 2005

4000km since complete rebuild

5lt worked(From top to bottom), Blue motor, with the turbo pattern. Custom fiberglass cold air intake, 650 Holley Double pumper Square bore, Holley blue fuel pump, pressure regulator with 1inch line and fuel water separator filter, 1inch spacer, Holley Performer manifold, Vk heads that are HDT factory swirl throated and ported, bronze valve guides, EFI oversized valves, hardened pushrods, strengthened valve springs, adjustable Street Terra Roller Rockers 1:65 ratio. Custom grind cam based on the Crane 286 cam with hardened based hydraulic lifters. Custom made Chev “tall” electronic Distributor. Inside block coated with easy oil flowing paint. ACL Race series gaskets, rings and bearings kit throughout, Bored 30thou with ACL pistons, crack tested Crank with Oil holes drilled.
Huge new 95 amp alternator, refreshed power-steering pump, refreshed starter motor. Extractors with 2.5 inch sectioned exhaust, comes with other exhaust options for choice of sound.
An optional extra for $500 is a custom Y-piece cut-out exhaust section with cables and in-cabin controls to adjust noise from quiet full exhaust to loud extractors only exhaust (cost $900 to make).

Customised engine bay, everything is hidden, the towers are completely empty, looks great!! All wires and bottles are tucked under the guards, bonnet stays up with gas struts. All relays have been moved inside the cabin. 17 plate truck battery has been moved in the boot (there is an in cabin electrical cut-out switch). Boot is carpeted and comes with small tool kit.

Turbo 400 Auto Trans, 3000 stall converter, connected to a custom once piece tail shaft.
10 Bolt 3.08 diff.
VL Turbo brakes.
16” Craig Davis Thermo Fan, never gets hot!!
Solex Locks
Electric windows, central locking etc….

Custom body, fresh 2pk paint, Pure White.
Side rubber molds have been removed and the doors have been made flush with no grooves.
17 inch rare Titans, metal polished with near new 235/45 rubbers.
Pedders lowering and race suspension throughout.

Excellent complete interior, looks brand new.
Comes with CD-MP3 player, 10 inch sub, 7x10s, 2 amps etc.

Starts first time, every time.
Reason for selling; the car is lucky to do 10km a week, it rarely gets driven and needs to make way for another project car.

Comes with heaps of spare parts for free, I need to empty out my garage!!
Cost thousands to build.
Sell for $8400 ono.
Located Vic S.E.

Serious enquires to sirjon@####################

http://www.####################/sirgeo/vh1.jpg

http://www.####################/sirgeo/vh2.jpg

http://www.####################/sirgeo/vh3.jpg

http://www.####################/sirgeo/vh4.jpg

http://www.####################/sirgeo/vh5.jpg

SirJon
24-09-2004, 05:24 PM
more pics.

http://www.####################/sirgeo/vh6.jpg

http://www.####################/sirgeo/vh7.jpg

http://www.####################/sirgeo/vh8.jpg

http://www.####################/sirgeo/vh9.jpg

http://www.####################/sirgeo/vh10.jpg

http://www.####################/sirgeo/vh11.jpg

http://www.####################/sirgeo/vh12.jpg

http://www.####################/sirgeo/vh13.jpg

SirJon
05-10-2004, 08:46 PM
Price dropped to $7200 ono, from $8400.
If not sold soon, it's going in the trading post.

SirJon
03-11-2004, 07:21 PM
I've lowered the price to $6600.
That means you buy my motor and get vh SLE shell with a shieet load of parts. I'll even chuck in a VH HDT body kit.

pie5
07-11-2004, 07:07 AM
i would love to have a look at it some time if thats ok.have you ran it down the 1/4 yet