PDA

View Full Version : F.s: Lingenfelter 'GT1' Cam



Rebel SS
02-12-2004, 09:22 PM
LINGENFELTER 'GT1' CAM

http://members.optusnet.com.au/~kleiner5/LPECam218.jpg
Cam specification is: 218˚/218˚@.050” - 0.534”/0.534” with 1.7: rockers – 114˚ LSA.

This cam was made/ground by same company that is running a 541rwkw Corvette that is pulling 9.5's in street form.

This cam almost brand new. It was designed for maximum power output and best driveability. It’s a hollow billet cam where LPE only uses induction hardened cam cores to produce an OEM quality camshaft that can be used with the factory lifters. It’s got minimal lope at idle without sacrificing performance. It’s on a wide separation and has no advance built into it which allows it to produce great low end power with awesome mid to top end power rivalling much larger spec cams.

A Qld SS with this spec cam and mild headwork with standard bolt-ons, otherwise stock street form was pulling consistent 12.5’s. This cam incorporates fast ramp design that generally will deliver consistent 240 - 250 rwkw in an A4 equipped car.

Perfect cam for a daily driver and the week-end racer. $425 :)

Rebel SS
15-12-2004, 07:16 PM
Price reduced to $395

Hope this makes it a lot more attractive. That's equivalent to almost 1/3 of original cost, and its like new.

Mark :rolleyes:

Rebel SS
21-12-2004, 06:51 PM
Thank you one and all, the cam has been sold.

Mark :)