BlownCV8
16-03-2005, 09:16 PM
I know I have posted tis before but It really wasnt covered well enough as far as detail goes.....so here it is!!
T trim blower to suit LS1,
Inc. Bracket and power steering belt system 7 to 12 psi pullies
Inc. 4’ flexible inlet and K&N Filter. $6000.00
Separate cooling system for blower
Inc. pump, wiring and all hoses. Has its own oil tank (not plumbed into sump).
Inc. Blower oil cooler….very safe thing to have.
$1000.00
Intercooler to suit above
Inc. 3’ pipe intercooler set up core size is 300x600x75, all silicone joints etc.
Blow off valve and air intake sensor. $2600.00
Crank drive belt system, to suit Vortech LS1 forced induction kits, 12+ psi
Inc. Harmonic Balancer, Crank pulley, Blower pulley tension bracket and fittings. $1200.00
Will separate the above as indicated or sell as complete kit for $10,000.00. This kit new is worth $17,000.00
You can buy the whole kit and safely put it on a stock motor with the 7 psi pullies fitted, expect about 350rwkw, Then up the ante as you see fit with possibly a built motor and the like for 450 + rwkw at 12psi
No time wasters please, to busy for it…..If your serious let me know via PM
Thanks Rob
T trim blower to suit LS1,
Inc. Bracket and power steering belt system 7 to 12 psi pullies
Inc. 4’ flexible inlet and K&N Filter. $6000.00
Separate cooling system for blower
Inc. pump, wiring and all hoses. Has its own oil tank (not plumbed into sump).
Inc. Blower oil cooler….very safe thing to have.
$1000.00
Intercooler to suit above
Inc. 3’ pipe intercooler set up core size is 300x600x75, all silicone joints etc.
Blow off valve and air intake sensor. $2600.00
Crank drive belt system, to suit Vortech LS1 forced induction kits, 12+ psi
Inc. Harmonic Balancer, Crank pulley, Blower pulley tension bracket and fittings. $1200.00
Will separate the above as indicated or sell as complete kit for $10,000.00. This kit new is worth $17,000.00
You can buy the whole kit and safely put it on a stock motor with the 7 psi pullies fitted, expect about 350rwkw, Then up the ante as you see fit with possibly a built motor and the like for 450 + rwkw at 12psi
No time wasters please, to busy for it…..If your serious let me know via PM
Thanks Rob