tramp isues

[highlander_69r]

i went to the willowbank t&t tonite and ran a pb 13.4@106mph anyway my ss now has axel tramp issues.its auto and i aint stalling it up and i tried using 1/4 throttle it helped a little but it was still there

[VYSHSV8]

Are you running the standard bushing in the rear end if so if you can afford it upgrade it to nolathane or some thong similar this will help to prevent some of the twisting forced applied to the rear end as the standard rubber is soft and will twist under load.

[chev]

Ring Harrop for their rear diff housing with huge support "eye" bushes. This housing eliminates axle tramp

[SV8VY]

I lowerd mine with King springs and have Koni shocks in the rear and dont get any tramp.

[VooDoo]

Best fix i found was more peddle (the loud one). I hammer it off the line and no tramp, if i dont give it enough then the back end bounces all over the place.

[highlander_69r]

im runnin the standard rear and never had any probs b4 , even the first 2 runs on the nite were good , but once i took off t/c all hell broke loose, definatly not a good feelin

[YIIR8]

Best fix i found was more peddle (the loud one). I hammer it off the line and no tramp, if i dont give it enough then the back end bounces all over the place.

Tried launching last night with 1000rpm more on board, really bad tramp, almost turned the wipers on :bash: so more "loud" pedal not a fix in an M6 at least ;)

[markone2]

:bash: so more "loud" pedal not a fix in an M6 at least ;)


M6 ? axle tramp? I can give you an excellent cure for that minor technicality :D …..give you at a minium gain of another good ½ second to boot :dance:

[ED]

So what is it Mark?!!!!!! (I dont get it any more though)...... :)

[Tez82]

Mate just check out the Harrop website, heaps of options and they arn't that pricey. Like I said on the night changing the springs helps heaps :) By the way my last run i bet my PB now 13.66 @ 102.7mph with just zorst :)

[markone2]

So what is it Mark?!!!!!! (I dont get it any more though)...... :)


Sorrry Ed...I thought you'd AUTOMATICALLY pick that one up :D

[Oztrack Tuning]

Rear of diff noltec mount. Two other noltec bushes at front of arm. one each side, camber kit and its all gone.
Can be eliminated without big expense.

Just get ET street radials and its gone - it wont tramp if its not spinning :D