PDA

View Full Version : Ebay Rear Camber kit



sikhabib
22-06-2005, 06:47 PM
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&category=50138&item=4557697930&rd=1&ssPageName=WDVW

are these any good.

i have a stock vy ss series2 ute would i have the fe2 suspention

thanks
ronny

SuteS
23-06-2005, 08:18 AM
Not a bad price..keep an eye on it. Not sure about "NolTec"? Anyone have any experience with these.

Yes you have FE2 in the SS ute (I hope).

Waughy
23-06-2005, 09:05 AM
I'm looking at noltec bushes for my front swaybar link pins, have been told they are sort of in between rubber and nolethane, better than rubber but a bit soft so won't do any damage where nolethane can if used in the wrong places, such as sway bar link pins. I'd look at a set for the VT if my e-bay account wasn't on hold.

sikhabib
23-06-2005, 10:02 AM
thanks for the info guys, i think im going to buy a set cause i do have trouble with the inter part of the tyre wearing out and i do go to the track alot.

Does the car handle any better when having negative camber on the back wheels?

chops
23-06-2005, 10:29 AM
THIS kit is for your VR VS with independant suspension and the VT VX AND VY that is with out lowered or the fe2 suspension

I take this as being not suitable for FE2, and therefore your car.

I'd double check before buying.

chops

THE308
27-06-2005, 01:46 AM
I take this as being not suitable for FE2, and therefore your car.

I'd double check before buying.

chops


But the ad also says,

if you have a lowered or fe2 setup you need 2 sets that i will do for $160.

THE308
27-06-2005, 01:49 AM
i think im going to buy a set cause i do have trouble with the inter part of the tyre wearing out

You have a warranty problem. Holden will fit a kit under warranty. You just have to complain to the dealer and don't accept no for an answer.