PDA

View Full Version : Which one boys ?...


RED R8
23-06-2005, 04:46 PM
I have a lovely VYSS with a cat back zorst and plan on doing a mafless tune asap but first want to do my cai but simply cant decide on which one .My future plans for car will be 3.9's in diff and thats all these are my choises and I dont mind induction roar.

1:mcai plus gts maf pipe 2 hole and k&n.

2:K&N air charge or starr pod or unifilter pod set up etc.

3:G&D otrcai or sureflo etc.

Basicly I want the best power gain not to fussed on price any feed back will help my decision. :)
VRIIClubby
23-06-2005, 04:50 PM
OTRCAI without a doubt...
SLEEPERVX
23-06-2005, 04:51 PM
Wait and get the OTRCAI with the Mafless tune
HERCULES
23-06-2005, 04:51 PM
I would be going for OTRCAI :D
RED R8
23-06-2005, 04:53 PM
Any particular brand better than others.
BLACK 346
23-06-2005, 04:55 PM
OTRCAI, only reason I went the Unifilter sealed pod
over this is because I didn't want to trash my
dual engine covers to get it to fit. Being a VY
you already have an MCAI by the way :)
Edit...Did you end up getting those photos Daz?
RED R8
23-06-2005, 04:58 PM
I thought the VySs had mcai.And yes Rod thanks heaps mate looks good.
BLACK 346
23-06-2005, 05:25 PM
I thought the VySs had mcai.And yes Rod thanks heaps mate looks good.

No probs mate, look forward to hearing the results
from your tune, you will love it :) :burnout:
jsttry
23-06-2005, 06:06 PM
Definately OTRCAI.

Black346 no need to change the engine covers. I've seen the PT OTRCAI fit with both VZ SS covers and VY HSV dual engine covers with no modifications.
BLACK 346
23-06-2005, 06:08 PM
Definately OTRCAI.

Black346 no need to change the engine covers. I've seen the PT OTRCAI fit with both VZ SS covers and VY HSV dual engine covers with no modifications.

I don't have those horrible covers Jay, I have
nice Red aftermarket ones :)
jsttry
23-06-2005, 06:14 PM
I don't have those horrible covers Jay, I have
nice Red aftermarket ones :)
I assume they're the nice HSV style ones that everyone used to get before the VZ ones came out so cheap. That's what YIIR8 has and his OTRCAI fit without a problem. Maybe YIIR8 has a pic somewhere....
RED R8
23-06-2005, 06:16 PM
Did you go maf or mafless Black 346.
BLACK 346
23-06-2005, 06:18 PM
I assume they're the nice HSV style ones that everyone used to get before the VZ ones came out so cheap. That's what YIIR8 has and his OTRCAI fit without a problem. Maybe YIIR8 has a pic somewhere....

Just know that Sureflo told me there's will not fit
with the aftermarket covers.
BLACK 346
23-06-2005, 06:18 PM
Did you go maf or mafless Black 346.

Maf tune by Sam.
HERCULES
23-06-2005, 07:08 PM
SLYLS1 has the dual engine covers and OTRCAI.

http://www.vicstreetutes.com/slyls1/englrg.jpg

Also heres a couple pics of the Sureflow OTRCAI with Dual VZ Covers.

http://img154.echo.cx/my.php?image=otrcaisil20iz.jpg

http://img295.echo.cx/my.php?image=otrcaitri2sz.jpg
KeenGolfer
23-06-2005, 07:21 PM
Go the OTR intake. The Sureflow one looks crap IMO but works very well.
leelee
23-06-2005, 08:21 PM
Have a look at the OTR by G&D.

They have the runs on the board.

Cheers

Lee
KeenGolfer
23-06-2005, 08:37 PM
Have a look at the OTR by G&D.

They have the runs on the board.

Cheers

Lee
Unless you want to bend your condensor I wouldn't. You shouldn't have to bend things to get an OTR to fit.
Delco
23-06-2005, 09:34 PM
SLYLS1 has the dual engine covers and OTRCAI.

http://www.vicstreetutes.com/slyls1/englrg.jpg

Also heres a couple pics of the Sureflow OTRCAI with Dual VZ Covers.

http://img154.echo.cx/my.php?image=otrcaisil20iz.jpg

http://img295.echo.cx/my.php?image=otrcaitri2sz.jpg

Does that have a filter in it ?
Wayne@GM Motorsport
23-06-2005, 10:51 PM
http://www.vicstreetutes.com/slyls1/englrg.jpg

My one that I used to have "pictured above" was from HPF it never had a filter and wasnt designed for one, cost was about $400- ish, gave me 0.30 1st run i used it with no other changes to the ute.

Cheers

SLY
leelee
28-06-2005, 02:22 PM
Unless you want to bend your condensor I wouldn't. You shouldn't have to bend things to get an OTR to fit.

I didn't know you had to have the condensor bent for it to fit. :bash:

Learn something new everyday.

Cheers

Lee
MattJ
08-07-2005, 01:33 PM
Unless you want to bend your condensor I wouldn't. You shouldn't have to bend things to get an OTR to fit.

Andrew, you dont have to bend the condensor on VY onwards, thanks. We are well into development for a new style for earlier VT and VX.
-shady-
08-07-2005, 08:45 PM
Andrew, you dont have to bend the condensor on VY onwards, thanks. We are well into development for a new style for earlier VT and VX.

Thats good news, im in the market for one atm, could you PM me or post a thread in your sponser section when its ready with a price and pic,
will it be filtered?