Dyno day at Chev's

[chev]

Goodaye all. Will be having a dyno day on the 18th of Feb, Saturday morning starting at 9.00am. The address is 33 Aster ave Carrum Downs Melb, melways ref 100C3. Cost will be $35 per vehicle with best of 3 power runs. Free BBQ with coffee/tea. All very welcome. 2wd/rwd vehicles. Come and meet some of the fellow forum members. Please indicate who will be in attendance. Hope to see you there. Thanks Chev

official Participation list

so far we have:
1. motomk
2. MNR-0
3. CSV_LS1
4. Scud
5. Smikvyss
6. CLUBVX
7. spank
8. macca33
9. Blown VZ Clubby
10. dazz5.7
11. Uncle Tone
12. exwrx
13. Ls1CorpCruiser
14. 8throttlebodies
15. GMLS1
16. Kritzo
17. scolss
18. Bean Man - GENUTE.
19. JLR
20. BigKev
21. divjak
22. Neatvx
23. UTE346
24. vxexec
25. evlcv8
26. Shaness8
27. Steve
28. XsPwr2W8
29. Jamie
30. VH mate of UTE346
31. Ken (Harrop)
32.
33.
34.
35.

The day will be capped at 35 cars so get your names down guys :nos:

[motomk]

Yay I have the day off!!! I will have a go! 5 year anniversary since I last ran down there!

motomk

P.S. Chev, do you want me to put this thread in your forum so you can edit it if you need to keep an attendees list or something?

[MNR-0]

Been a year and a half since I was down your neck of the woods. Sounds good. Next door aferwards? :banana:

[F6Mauz]

I'll be in for this :wave:

[Scud]

Count me in, I'll give it a bash!

[chev]

Yay I have the day off!!! I will have a go! 5 year anniversary since I last ran down there!

motomk

P.S. Chev, do you want me to put this thread in your forum so you can edit it if you need to keep an attendees list or something?
That would be a good idea. Thanks motomk

[Smikvyss]

Count me in Gary if i get my tune back :nos: :burnout:

[Smikvyss]

P.S. Chev, do you want me to put this thread in your forum so you can edit it if you need to keep an attendees list or something?

Motomk you better put it there he is still new to all :rofl: this

[HRTSEN]

Hmm

I am definetly in on this one.....lets get this 6litre on the rollers.

regards,

Richard
RIP CLUBVX

[spank]

i might bring the vl down for a post sandown checkup ,make sure i havent hurt her :eek:

[macca33]

Sounds good Gary, I'll be bringing the rig down for a go in sunny Carrum Downs - IF the missus and kids will allow me the day off!!!

Regards,
Macca

[AQICLS3]

hmmmmmm.......might come for a look see!!!!!!!

[dazz5.7]

Always wanted to go to one. I'm in !

[JT]

I think its a given that I will be there(I hope)

[Uncle Tone]

I'll see if I can make it down. Might have to work, so we'll see.

[JT]

I'll see if I can make it down. Might have to work, so we'll see.
you just have to be there

[Uncle Tone]

you just have to be there

I shall try my best :)

[Sonny@Autowerks]

I wouldnt let tone on ur dyno chev :rolleyes:

[Uncle Tone]

I wouldnt let tone on ur dyno chev :rolleyes:

might be a bit powerful you think? :nyuk:

[chev]

Been a year and a half since I was down your neck of the woods. Sounds good. Next door aferwards? :banana:
Grant, I have 15% discount vouchers for next door for all that attend the dyno day to jump in the huge spa:lol: :lol:

[Sonny@Autowerks]

might be a bit powerful you think? :nyuk:

not at all tone,just dont want you to ruin chev's dyno day with all ur engine parts scattered everywhere wen it grenades from detonation :lol:

[chev]

not at all tone,just dont want you to ruin chev's dyno day with all ur engine parts scattered everywhere wen it grenades from detonation :lol:
Morning Sonny. I will be keeping a good ear out for detonation:thumbsup:

[Uncle Tone]

not at all tone,just dont want you to ruin chev's dyno day with all ur engine parts scattered everywhere wen it grenades from detonation :lol:

Best to keep this sort of talk out of another sponsors forum Sonny, ok?:yup:

[tlr1000]

Hi all, Uncle Tone i was sent a pm saying you will be available for maf autographs on the day??????

[exwrx]

Marrano's WTF you can detect detonation from interstate ?

Count me in too, a last dyno run with my maf.

[Uncle Tone]

Marrano's WTF you can detect detonation from interstate ?

Count me in too, a last dyno run with my maf.

Cool Spiro, I'll see you there if I can make it.

TLR 1000, yes I will autograph mafs for anyone that asks:D

[Ls1CorpCruiser]

Count me in PLEEEEEESE!!!:bravo: :bravo: :bravo:

Will have to get in early as the Grange is booked for a wedding in the arvo!:1peek:

[8throttlebodies]

Add me in too.. be good to catch up with a lot of you guys... and get the car run.

8tb

[GMLSI]

I would also like to be added to the list.
I will bring my brothers Stato to see how little power it makes!

Ryan

[Krizto]

Hmm

I am definetly in on this one.....lets get this 6litre on the rollers.

regards,

Richard
RIP CLUBVX

Nice to see ya back to your old ways Richi !!!

Count me in too please ...... see it I can take out the V6 titles again :evil:

[SPJ]

I will come down for a look....

[Smikvyss]

Hi Gary i have got two more cars that are coming

[Sidewindr]

I'll come down to reminiss :D No dyno run for me as the car is still under development and is hardly anything impressive at the moment with a 9.2 CR and no FI.

[Bean Man]

I'll be there of course. Got it on the calendar.

Bean Man.

:thumbsup:

[JLR]

Yes thanks. Ill come down! Put me on the list.
Ta

[Smikvyss]

Hi Gary i have got two more cars that are coming
:nos: These two are Jamie and Skol

[BigKev]

Well the car is 100% stock but might be good for a laugh to see what its putting out, just have to hope the poor old girl doesn't distribute engine parts all over the dyno.

Anyway i SHOULD be able to come down, sounds like a good opportunity to meet some of you guys.

[divjak]

at this stage im in

but wont be there till after 1pm (working)

cheers
divjak
jim

[chev]

Well the car is 100% stock but might be good for a laugh to see what its putting out, just have to hope the poor old girl doesn't distribute engine parts all over the dyno.

Anyway i SHOULD be able to come down, sounds like a good opportunity to meet some of you guys.
Hey BigKev. Doesn't matter how much power she is putting out. There are still alot of vehicles out on the road will less rwkw than your's

[chev]

at this stage im in

but wont be there till after 1pm (working)

cheers
divjak
jim
Will still be there divak

[Krizto]

Hey BigKev. Doesn't matter how much power she is putting out. There are still alot of vehicles out on the road will less rwkw than your's

Like me ............ :hide:

[Neatvx]

G'day Gary, might have to work so can't say for sure but if I can get out of it I will see you there.

[JT]

G'day Gary, might have to work so can't say for sure but if I can get out of it I will see you there.
C'mon Mark,you know you want to be there

[UTE346]

will be there i will put the misses car on so should have the lowest numbers for the day

[ScolSS]

:nos: These two are Jamie and Skol

Skol would be me! Cant wait as it will be my first dyno run. Sounds like i am going to be the baby of all the cars there. I have only done the MCAI and difillpo extractors and exhaust so i am not going to be setting any records but will be interesting to see what my gains were.

[Neatvx]

C'mon Mark,you know you want to be there

There you go Joe. So keen to go I just quit my job.:wave:

[AQICLS3]

Gary I will only be coming down for the free BBQ and coffee:booze: and a look see. Dont need to run the car but happy to help out on the day. I have been on so many dyno runs leave my spot for someone else who would like to run.

[Smikvyss]

Skol would be me! Cant wait as it will be my first dyno run. Sounds like i am going to be the baby of all the cars there. I have only done the MCAI and difillpo extractors and exhaust so i am not going to be setting any records but will be interesting to see what my gains were.

Sorry mate for spelling your name wrong:teach:

[macca33]

Skol would be me! Cant wait as it will be my first dyno run. Sounds like i am going to be the baby of all the cars there. I have only done the MCAI and difillpo extractors and exhaust so i am not going to be setting any records but will be interesting to see what my gains were.


Don't worry mate, I'll be in the same boat as you.

I should be getting the D/F 4-1s on next week when they're back from HPC and they'll augment the 2.5" cat-back I've got now.

I'll be interested to see what she goes too.

Regards,
Macca

[MR-LS1]

ill come down for a squizz...

Tony.

[alto]

uncle tone said i should come............so i will...........but only to spectate (you can't have too many maf monsters ripping up the dyno)

[JT]

uncle tone said i should come............so i will...........but only to spectate (you can't have too many maf monsters ripping up the dyno)
Why not? just whack it on

[alto]

Why not? just whack it on

i might have a crack - i'll see how i go for time on the day

[EVLCV8]

Put me down, sounds like a good day!

Adz

[Smikvyss]

:nos: These two are Jamie and Skol

Where is jamies name on the list should be with scolss:vpo:

[Uncle Tone]

i might have a crack - i'll see how i go for time on the day

Excellent!! :bravo:

[shaness8]

Put me down, and mate steve.

cheers

[chev]

ill come down for a squizz...

Tony.
Give the tonner a run Tony. By the way can mods put new names on list for me as I'm not sure how to. Thanks Chev

[XsPwr2W8]

Put me down if there is still room, will be intresting to see what the rebuild goes like.

[Blown VZ Clubby]

Ill come down and see how my blower goes ( Harrop ):banana:

[chev]

Ill come down and see how my blower goes ( Harrop ):banana:
Hey BIG fella. Welcome aboard. I'm sure Mick, Frank and the boys at APS frankston will give the clubby all the care she needs mate. Boys do a great job. Looking forward to give her a full pull on the rollers. Cheers Chev

[chev]

Ken from Harrop Engineering will be giving us a talk on all Harrop products with emphasis on LS1/LS2 blowers during the lunch break

[f*freddy]

WISH I COULD BE THERE :bawl:

[Smikvyss]

WISH I COULD BE THERE :bawl:
Well what is stopping you :confused:

[Krizto]

Looks to being a good day all round .... looking forward to it.

:bravo:

[Uncle Tone]

Looks to being a good day all round .... looking forward to it.

:bravo:

Certainly is shaping up to be a very big day. Cheers to Chev for the organization!:bounce:

[Blown VZ Clubby]

Hope its not going to be to HOT like this weekend :cussing:

[alto]

Ken from Harrop Engineering will be giving us a talk on all Harrop products with emphasis on LS1/LS2 blowers during the lunch break

I shall bring my note pad and pen

[Krizto]

I shall bring my note pad and pen

I'll be doing all the recording from the dyno and will I'm going to bring down my video camera and will record it then rip it and stick it up somewhere for all to download.

:D

[chev]

I'll be doing all the recording from the dyno and will I'm going to bring down my video camera and will record it then rip it and stick it up somewhere for all to download.

:D
Good work Krizto. Hope it's not a 40deg day like today. Will have to hire a huge evaporative cooler to keep air temp down

[XsPwr2W8]

Hi Chev

Will the cars be run through in the order on page 1 on the day?

[Smikvyss]

Can someone update the the names list of the people that are going

[Uncle Tone]

Another question, can I change some parts when on the dyno? I would like to see how may car responds to an OTRCAI, but I want a couple of base runs first.

[Krizto]

Hi Chev

Will the cars be run through in the order on page 1 on the day?

We'll have to let Chev comment on this but I'll say as people pay and register their car, thats the order we'll go with.


Another question, can I change some parts when on the dyno? I would like to see how may car responds to an OTRCAI, but I want a couple of base runs first.

Again up to Chev but my guess would be no only because if we do if for one we really should do it for all. Also the time factor and everyone only get three run's.

If you wanna see how your car run's with a OTRCAI then fit it before you put it up on the roller's.

Chris :wave:

[Uncle Tone]

Again up to Chev but my guess would be no only because if we do if for one we really should do it for all. Also the time factor and everyone only get three run's.

If you wanna see how your car run's with a OTRCAI then fit it before you put it up on the roller's.

Chris :wave:

I don't mind paying for the privelige, if that helps. But if its the time factor thats fair enough I suppose :(

[Krizto]

I don't mind paying for the privelige, if that helps. But if its the time factor thats fair enough I suppose :(

I can't really comment either way mate, Chev will have to give the final word but time might be a factor more than anything.

Maybe PM Chev and see if you can't work out something between the two of you.

Chris :wave:

[chev]

I don't mind paying for the privelige, if that helps. But if its the time factor thats fair enough I suppose :(
Evening Tone. Chris is on the money. With 35 cars we will going hell for leather to give every one 3 runs. With a lunch break in between it will be a long but rewarding day. If you want some "personal" time, ring me for some 1 on 1 dyno time. Guys, I have updated the list but doesn't seem to change. What am i doing wrong?

[Krizto]

Evening Tone. Chris is on the money. With 35 cars we will going hell for leather to give every one 3 runs. With a lunch break in between it will be a long but rewarding day. If you want some "personal" time, ring me for some 1 on 1 dyno time. Guys, I have updated the list but doesn't seem to change. What am i doing wrong?

Chev,

Click on the edit buttom and modify the list then click the SAVE button and it should save .... in theory :thumbsup:

Chris :wave:

[Smikvyss]

He has tried that but is doesnt work :cussing:
Chev,

Click on the edit buttom and modify the list then click the SAVE button and it should save .... in theory :thumbsup:

Chris :wave:

[Krizto]

Just PM'ed MOTOMK ..... he's a nice Moderator and I'm sure will help.

Or we can wait for Ryzz ...... Everyone Loves Ryzz !!!

:love:

[chev]

Chev,

Click on the edit buttom and modify the list then click the SAVE button and it should save .... in theory :thumbsup:

Chris :wave:
Have done just that but to no avail? On the day, it will be first there best dressed. Will make up list as you guys come and see me. Have got aprrox 36 vehicles so far. If we have the time we can run up more.

[motomk]

He has tried that but is doesnt work :cussing:

I think I have updated it?

[motomk]

I might have been editing it at the same time. Is the list correct now?

[Uncle Tone]

Evening Tone. Chris is on the money. With 35 cars we will going hell for leather to give every one 3 runs

Oh well. I'll fit it before it goes on the rollers I suppose.

[Blown VZ Clubby]

No iam am missing


I might have been editing it at the same time. Is the list correct now?

[MNR-0]

If the list is full someone can take my place. I'll come regardless and not fased about a dyno run (ive had enough to last me a lifetime). I'll just talk shit and support everyone else - or - I can help out with whatever you need doing.

[Krizto]

We should be alright Grant.

Erik (AQICSS) is not going on the dyno so thats 28 plus I know Richi (CLUBVX) is coming down later.

If you'd rather go towards the end or something thats up to you.

I went down and sore Chev today and he was playing around with the projector for the day. Will be a good chance to catch up with some old faces and meet some new one's too :)

Chris :wave:

[Smikvyss]

Did he get the projector going i was there on saturday and the heat was playing up with it Cheers Richard :flame:


We should be alright Grant.

Erik (AQICSS) is not going on the dyno so thats 28 plus I know Richi (CLUBVX) is coming down later.

If you'd rather go towards the end or something thats up to you.

I went down and sore Chev today and he was playing around with the projector for the day. Will be a good chance to catch up with some old faces and meet some new one's too :)

Chris :wave:

[chev]

Did he get the projector going i was there on saturday and the heat was playing up with it Cheers Richard :flame:
All AOK Rich. It had a badly blocked air intake filter. Something that you would associate with a gen3 that has been serviced by the Holden dealer:confused:

[Krizto]

All AOK Rich. It had a badly blocked air intake filter. Something that you would associate with a gen3 that has been serviced by the Holden dealer:confused:

Its now running a OTRCAI ........ Ontop The Rolleroom Cold Air Intake :lmao:

[chev]

That gives me an idea Chris:yup:

[JLR]

I'll have to be there early, i've got an wedding on that day :(

[Uncle Tone]

I'm bumping this thread so I don't forget when it is!!

:stupid:

Hey, there's a few places left!!! C'mon, whos filling them!!

[jneil]

I'll most likely come down for a squiz, don't need a run though.

[JT]

Cmon guys get your names down,its gonna be a ripper day

[Dane]

Hey all ...... Would'nt mind popin' over for looksy, not necessary for a Dyno run but more so to say giday.:headbang:

[Sidewindr]

I'm bumping this thread so I don't forget when it is!!

:stupid:

Hey, there's a few places left!!! C'mon, whos filling them!!


Errr you don't need to bump a sticky :weirdo: :hmmm:

[Haze_V8]

I'll come down for a look only as I haven't done any mods since last time I had my car on the rollers

[monarocv8z]

I was hoping to give the car a run but it's now looking as if i wont get it back in time. But i'll still come down and have a look. ill join the peanut gallery.

[JT]

Errr you don't need to bump a sticky :weirdo: :hmmm:
You are absolutely right,but it does bump it up on the "new posts" search

[Sidewindr]

You are absolutely right,but it does bump it up on the "new posts" search
bumps are a bannable offence however :slap:

[macca33]

bumps are a bannable offence however :slap:


And so it should be....No 70s dance moves here thanks!!!! :dance: :lol: :bounce:

Regards,

Macca

[Uncle Tone]

Errr you don't need to bump a sticky :weirdo: :hmmm:

You do if you want to see it in new posts, which is the first place I look when I log on here :nutkick:

[Uncle Tone]

bumps are a bannable offence however :slap:

Whoops....can a mod edit my post, substituting the word "bumping" for the word "contributing" :nyuk:

[macca33]

Whoops....can a mod edit my post, substituting the word "bumping" for the word "contributing" :nyuk:


Yes, technically they could, BUT there was never a shitey 70s dance style named "contributing," so I reckon they shouldn't. :lol: :lol: :lol:

Macca

[chev]

Goodaye guys. WTF does bumping mean? I have updated the list again but it still won't change????. We currently have 35 cars on the list, but I'm sure not everyone will show. For the crew coming for a look, I will run up your cars time permitting. The day is for good fun and to get to know more of the forum members. Do you reckon name tags would be a good idea??? Please say so. Keep you all posted. Cheers Chev.

[motomk]

Goodaye guys. WTF does bumping mean? I have updated the list again but it still won't change????. We currently have 35 cars on the list, but I'm sure not everyone will show. For the crew coming for a look, I will run up your cars time permitting. The day is for good fun and to get to know more of the forum members. Do you reckon name tags would be a good idea??? Please say so. Keep you all posted. Cheers Chev.

chev,
Bumping is posting on a thread to move it up the order in the view "New Posts" section, the mods don't like it!!!! However this thread is already a sticky thread which means it remains at the top of your particular forum anyway, so they should only have to click on to your forum and it should be at the top of the pile!
I don't know why you can't edit the list on the first page, very odd. Should be hit the EDIT button on the first post, change the content in the post and then press the SAVE CHANGES button at the botton of the edited post.
You can post the additional attendees on here and I will add them to the list.

motomk

[jneil]

Do you reckon name tags would be a good idea???

Hi, My name is Jeff and I'm an alcoho....whoops, wrong forum!

"Bumping" is when sombody posts nothing (or some random crap) in a thread so that it updates and appears at the top of the new posts list for others to easily see it. It is generally not accepted by most forums.

edit: that'll teach me to open a few windows to read and slowly get around to replying.

[chev]

Motomk-18=GENUTE. 30=VH mate of UTE346. 31=Ken (Harrop) Thanks

[Wayne@GM Motorsport]

the ute boys will be coming down for a look.

[Sidewindr]

Goodaye guys. WTF does bumping mean? I have updated the list again but it still won't change????. We currently have 35 cars on the list, but I'm sure not everyone will show. For the crew coming for a look, I will run up your cars time permitting. The day is for good fun and to get to know more of the forum members. Do you reckon name tags would be a good idea??? Please say so. Keep you all posted. Cheers Chev.

Gary, Only Moderators can edit posts after the 15 minute edit window, you can delete posts/threads but not edit them in your forum. This is done primarily for legal reasons as this is a publicly published medium and once something is posted it is public record. If you need the first post updated just put something in this thread as you have done or e-mail moderators (http://www.ls1.com.au/forum/sendmessage.php) with the updates you require.

Should be a good day and you'll be flat out for sure with the number of people coming along :bounce:

[Smikvyss]

Gday mate what car are you bringing down :burnout:


I'll be in for this :wave:

[F6Mauz]

I'll be bringing down the Typhoon.

So i'll have the bottle of Nitros to spray over the intercooler to get those extra KW's:lmao: :p

[Speedy Gonzales]

May come for a looksy and to catchup, depends on work.

[SPJ]

Could you please add one to the list...

Spagg - VLT

[BIG V]

Hey guys, I'm looking forward to the dyno day to met more members.

Is there anyone with a sureflow 3.5 single system on a gen 3 going to the dyno day?. I am dead keen to hear one for real and not off a sound file.

Cheers, Big V

[Jezza@HDTCQ]

Put me down and a mate Mick.. looking forward to it, few forum members i've been meaning to catch up with.. Interesting to see how she goes in the warmer weather.

Jez

[2 cylinders shy]

Hey guys, I'm looking forward to the dyno day to met more members.

Is there anyone with a sureflow 3.5 single system on a gen 3 going to the dyno day?. I am dead keen to hear one for real and not off a sound file.

Cheers, Big V

Ill second that.

[chev]

Goodaye all. Updated list for dyno day.
1=motomk.
2=mnro.
3=csvls1.
4=scud
5=smikvyss.
6=clubvx.
7=spank.
8=macca33.
9=dazz5.7.
10=uncle tone.
11=tlr1000.
12=exwrx.
13=ls1 corpcruiser.
14=8 throttlebodies.
15=gmls1.
16=krizto.
17=dunstin.
18=sidewindr.
19=jlr.
20=jamie.
21=scolss.
22=big kev.
23=divak.
24=neat vx.
25=ute346.
26=mrls1.
27=vx exec.
28=evlcv8.
29=shaness 8.
30=steve.
31=xspwr2w8.
32=blown vz clubby.
33=ken(Harrop).
34=spagg-vlt.
35=big v.
36=jezzab.
37=mick-mate of jezzab.
38=2 cylinders shy
39=genute.
40=vh-mate of ute346

Will keep you all informed more as closer to the day, Cheers Chev

[Bean Man]

OMFG chev, we're gonna be flat out!

Bean Man

[JT]

OMFG chev, we're gonna be flat out!

Bean Man
you sure will be,better have your weet bix:rolleyes:

[chev]

Check out our newest member= big rob63

[Krizto]

Looks like is going to be a very long day for sure. Espically considering I'm getting there early to help setup :confused:

[chev]

Looks like is going to be a very long day for sure. Espically considering I'm getting there early to help setup :confused:
Thanks again mate. We will have a quiet beer afterwards:dance:

[tlr1000]

Hi all, Uncle Tone i was sent a pm saying you will be available for maf autographs on the day??????

My name is one the list but i wont be there, i was just asking the above question sorry for the misunderstanding.:burnout:

[Uncle Tone]

Goodaye all. Updated list for dyno day.
1=motomk.
2=mnro.
3=csvls1.
4=scud
5=smikvyss.
6=clubvx.
7=spank.
8=macca33.
9=dazz5.7.
10=uncle tone.
11=tlr1000.
12=exwrx.
13=ls1 corpcruiser.
14=8 throttlebodies.
15=gmls1.
16=krizto.
17=dunstin.
18=sidewindr.
19=jlr.
20=jamie.
21=scolss.
22=big kev.
23=divak.
24=neat vx.
25=ute346.
26=mrls1.
27=vx exec.
28=evlcv8.
29=shaness 8.
30=steve.
31=xspwr2w8.
32=blown vz clubby.
33=ken(Harrop).
34=spagg-vlt.
35=big v.
36=jezzab.
37=mick-mate of jezzab.
38=2 cylinders shy
39=genute.
40=vh-mate of ute346

Will keep you all informed more as closer to the day, Cheers Chev

Are all these people having cars run on the dyno?

Gonna be a big day indeed!!:cool:

[JT]

Are all these people having cars run on the dyno?

Gonna be a big day indeed!!:cool:
yes and yes

[Sidewindr]

Gary, I will be there but not on the dyno.

[motomk]

I too probably better be taken off the actual dyno list as my roster has changed and I now have to be at work at 2pm. I don't want to queue jump or anything or put pressure on having to run earlier than others. I will attend though and will pay for a dyno run. I said I would run initially and I personally get annoyed when people say they will run and then pull out so "I should cop it sweet too."

motomk

[VXSS346]

I think I'll be down there for a look.
Lots of nice cars to see.

[Krizto]

Gary, I will be there but not on the dyno.

Is your car off the road again?

[Ghosn]

Are u able to add 1 more car? If so I'd like to jump on the dyno.

[spank]

unfortunately the vl has sprung a bit of an oil leak after being pounded around sandown on the weekend so i will withdraw , cant have garys nice newly painted floor getting covered in oil , also i think some of it is getting onto the clutch ,so i had better fix it soon:bawl:

[spiv]

Now that I have my Clubby back after being off the road for a total of 7 months :dance: I might come and cruise down for a look.

Maybe we should organise a meeting point for us fellas from the Northern suburbs to cruise on down???

[Smikvyss]

Hi Gary i want be putting my car on the rollers i will be spectator instead

[Ghosn]

Hello? Any spots yet? ;)

[Smikvyss]

Get down ther early and you will get a spot

[chev]

Hello? Any spots yet? ;)
Ghosn. See the boys when you get there to put your name on the list. A few members have pulled out so there will be a spot. Cheers Chev

[Ghosn]

Ghosn. See the boys when you get there to put your name on the list. A few members have pulled out so there will be a spot. Cheers Chev

Can't wait :bounce:

[Smikvyss]

Hi all have you checked out this link yet? Update on Chev's dyno day (http://www.ls1.com.au/forum/showthread.php?t=50437)

[Blown VZ Clubby]

It doesnt work :flip2: :flip2:

[JT]

you mean http://www.ls1.com.au/forum/showthread.php?t=50437

[Smikvyss]

you mean http://www.ls1.com.au/forum/showthread.php?t=50437


Thanks JT thats what i wanted to do Cheers