Sureflo Dual 2.5", Pacemakers, Hiflow Cats, Complete System

[alexcs]

Pacemaker Tri-y's
Hi flow cats, 2.5" mild steel cat piping
2.5" Medium Dual Sureflo Catback.

The cats have moderate scraping in the shields from me going over bumps, but they still function fine. Beyond that, the system is in great nick and will definitely fit any VU-VZ Ute. Its a beautiful note for a 2.5" dual.

Remembering back, it cost me:

Pacemakers: $800 fitted
Catsx2: $300
Cat pipes: $190
Harness extendersx2: 120

Catback: $720
Stainless tips x 2 : $100

So $2230 New in June 2005.

Make me an offer, but im thinking a fair price for the whole lot would be no less than $1300 dont you think?

Thunder will install the entire system for $300 in addition should you require it. I am getting it done on Monday, so if anyone is keen to get down there the same day or arrange a day very soon after, they could have it swapped in almost immediately.

Anyway, call me on 0421278282, dont PM me im rarely on the computer at the moment, if youre interested!

Thanks, Alex.

(if you want the piece separately, i am willing to separate the catback from the other two pieces, but not the headers from the cats, unless a decent enough price is given)

[rowa]

how much for just the pacies to buy and are they hpc coated

[alexcs]

how much for just the pacies to buy and are they hpc coated

pacies arent hpc coated hence 800 fitted :)

id rather sell the pacies with the 2.5inch cat piping to hi flow cats as one thing, i mean unless youve already had your cats enlarged or replaced, youd want the hi flow cats as the standard piping is shit.

$700 for the pacemakers and the cat piping.

$500 for the catback.

price drop

[Donchz]

could the cat back be easily modded to fit a sedan?

[vx350int]

If rowa buys the pacies....how much for the cats?

cheers

[alexcs]

If rowa buys the pacies....how much for the cats?

cheers

300 bucks for the lot mate. 2 x hiflow cats and mild steel 2.5" piping all done by sureflo. cats were 300 each when i bought them, and piping was 190, so not a bad deal. these will fit between pacemaker tri-iy's and vy2/vz catback position perfectly becuase i originally had just the catback and standard pipes.

[vx350int]

Thanks.... keep me informed if you have a keen buyer for the extractors only

cheers

[SS_Fury]

id take the sure-flo system if it only fitted a sedan!!! doh!!!

[alexcs]

Ok Update: Nothing Has Been Sold!

So the Following is on offer

Pacemaker Tri-y 1 5/8" Extractors, non-HPC $500 (o2 harnesses $50)

You will need the harnesses if you are fitting these to a VY2 or VZ. Also supplied are heatshields for the steering rack boots, they just sit over the boots secured with the left and right steering rack bolts.

Cat Piping and Hiflow Cats $300

Mild Steel 2.5" piping, will fit between any set of tri-y's and a normal catback perfectly. this cost me $790 in July 05.

Sureflo Custom Twin 2.5" Medium / Mild Steel Catback. $500

Suits VU-VZ utes perfectly, will fit wagons and statesmans with a reangling of the rear resonator and the tips changed to suit the rear of either.

Will bolt straight up, new rear rubber mount supplied and fitting instructions provided.

I have an interested buyer for this, but no confirmation yet so if you get in first good on you.



Freight will be extra at the cheapest rate I can get through Toll, should you require it.

Call me on 0421 278 282 if you are genuinely interested in these items.

Pictures below
http://www.streetlight.com.au/images/car/system.jpg http://www.streetlight.com.au/images/car/left-pacie.jpg http://www.streetlight.com.au/images/car/right-pacie-engine.jpg http://www.streetlight.com.au/images/car/left-cat.jpg http://www.streetlight.com.au/images/car/right-cat.jpg http://www.streetlight.com.au/images/car/o2-sensor-harness.jpg http://www.streetlight.com.au/images/car/heatshield.jpg http://www.streetlight.com.au/images/car/front-cb.jpg http://www.streetlight.com.au/images/car/rear-cb.jpg http://www.streetlight.com.au/images/car/tips.jpg

[pillow]

Still got the Pacemakers? Any idea on how much shipped to Canberra (2913)?

[tugga]

witht he pacies fit a vx ss sedan?

[stickyfingaz]

can i use all this but the abstractors on my VZ V6 ute ?

[WRXDUP®]

Are these still available?

[alexcs]

All sold. will possibly have a stainless loud single 3.5" on the market in the next 4-6 weeks though if youre interested, going to a twin 3" system thats a little quieter probably :) getting a cam and want to make sure its not too obvious. the single 3.5" isnt that loud on a stock engine, but it gets quite loud with a decent cam im told.

anyway, ill post a separate msg. beyond that, this can be closed if you want mods.