PDA

View Full Version : Handbrake adjustment on VT SS 5.0 litre



Jamster
01-07-2006, 05:12 PM
G'day blokes, new to the site. I do all of my own simple servicing, but was wondering if anybody out there can explain how to tighten the handbrake on a Commo VT SS V8 auto.

HDTLECAL
01-07-2006, 09:56 PM
Mate when somebody answers ur thread i will be able to perform those same duties as i dont know how to adjust the hand brake either.

Sonnymad
01-07-2006, 10:26 PM
Jack the vehicle up and put it on stands,remove the rear wheels and ensure vehicle is in "nuetral" with the hand brake all the way down.Put 2 nuts back on the disc opposite each other on both sides,so you know the disc is sitting flush on the hub,then remove one of the 2 rubber plugs.using a torch locate the adjuster inside the disc,its located at the bottom.adjust the shoes till the disc locks,then bak it of few turns at a time till it spins "freely" or with out any drag,repeat it on the other side and check h/brake before putting it all bak together,hope this helps

;)

regards sonny