View Full Version : Vyss ported TB ?
RED R8
03-07-2006, 11:16 AM
After many hours searching I still cant determine what brand of TB seems best on the VY some like a brand them others don't.I am keen to purchase a TB for my car but want one that is going to work (not ss reductions etc) can anyone shed some light on a good brand I don't want to spend 5-$600 as I don't think the gains would be worth that so if anyone has a good one for sale second hand I am keen.
Cheers Daz.
Darkrayne
03-07-2006, 11:36 AM
I know guys on sc's forum and here in WA are using the Higgins throttle body on there's.. and have heard not one complaint about them!
thorny
03-07-2006, 12:02 PM
Daz PM Rebel SS he is pretty clued up on throttle bodies.
VooDoo
03-07-2006, 12:43 PM
very few make any more power, just a little bit more responcive. There are far better mods to spend the $$ on. If you have a stroker they make a bigger difference.
Rebel SS
13-08-2006, 09:52 PM
Hi Daz,
It depends on what bolt-ons/mods you have.
Basically, a standard motor with the regular bolt-ons will yield a gain of about 6rwKw with correctly ported and polished standard throttle body through an A4. (Proven on the dyno).
There is a major difference the way the motor behaves in regards to idle and responsiveness to minimal throttle opening. Further, there is proven gain in low down torque.
All the experienced racers/engine builders will tell you that its not the power but torque that wins the races.
Don't have to be an Einstein, but 'bang-for-buck' its an excellent investment with next to no depreciation.
Cheers,
Mark :burnout:
markone2
13-08-2006, 10:03 PM
Hi Daz,
All the experienced racers/engine builders will tell you that its not the power but torque that wins the races.
Cheers,
Mark :burnout:
All bar one :burnout:
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.