Sureflo single 3 1/2" for supercharded

[wicky]

Hi guys i drive a vxss it has a cam and a pwr supercharded on it has 10psi and can i put single 3 1/2" exhaust from Sureflo on it thanks

[vyssbeast]

you can, but depends if you'd rather it sound good or make more power.
i think a twin 3 inch will be more suited to your application

[wicky]

it makes 320rwkw now and it has tri-y extractors and a red back on it now it is time for a new one

[team illucid]

Hi guys i drive a vxss it has a cam and a pwr supercharded on it has 10psi and can i put single 3 1/2" exhaust from Sureflo on it thanks

I would go a Dual 3.5" - don't be shy.

[vyssbeast]

if you upgrade the whole system
Get 4 into 1 extractors with a twin 3" exhaust and you'll definatly see an increase in power across the entire range not just peak power

[Thunder]

This car has tri-y extractors, standard cats, and a dual 2.25" Redback system.

I have already suggested long 4>1 1-3/4" and stainless steel substrate cats with 3" pipework. Dual 3" would be ideal with this setup.

However, with Tri-y's and standard cats the dual 3" is overkill and the front section will not flow enough to make the system work properly.

The compromise is a 3.5" single system with 3" pipework from the cats to the merge the same as what we have done with a few other race cars.

This will have a lot more capacity than the dual 2.25" system that is currently on the car, and it will sound mean!

The normal 3.5" system only has 2.5" front pipework.

Cheers
Greg

[wicky]

thank you Greg i will book my car in two weeks befor i come down.