FS : VL Turbo

[VXCAL346]

Holden VL Turbo
Manual RB30ET

Hey peoples i have decided to sell my VL.
$6000 with the plates(VL30LT)
$5500 without the plates

160000ks on speedo
i think the engine has not long before i bought it been rebuilt as it is in way to good a condition to be 160000ks

Engine:
RB30ET(original turbo motor)
High mount S/S manifold
TO4E with external 38mm gate
3" mandrel exhaust
600*300*75 Front mount intercooler
Rising rate regulator
High flow billet fuel rail
EV6 Style 27lb injectors
Polished Alloy catch can
provisions for 2 extra injectors(currently running 1)
4" K&N Pod
195rwkw on 19psi

Gearbox:
Original MX7 5spd
bearings are a bit noisy but it will come with a full rebuild kit and brand new 2nd & 3rd synchros.
Heavy duty clutch

Diff:
Original LSD 28 spline 3.45:1 ratio
Comes with spare 28 spline mini spooled center

Body:
Painted in Maranello Red
Paint in fair condition(could do with a respray)
Body pretty straight(a couple of very minor dents)
Only rust is very small amount around the base of the front windscreen

Wheels
18*8 Starcorp(near new)
Wheels dont even have a single scratch on them.
225/40/18 tyres with around 95% tread

Interior:
VY II S pack front and rear seats(Black with black checker)
standard beige carpet and door trims.
Sony MP3 Stereo
Sony 6" in front doors
Sony 6*9 in custom parcel shelf
Boggard Turbo timer
Autometer Boost guage

Suspension:
Pedders Ultra Low front and rear springs
Pedders front struts
Monroe rear shocks
Pedders front and rear sway bars

Additional extras:
2L surge tank
Bosch 984 external pump
VY Gen3 internal pump
Comes with dead straight clean white bonnet

http://i109.photobucket.com/albums/n65/VL_30_LT/VL_30_LT12.jpg
http://i109.photobucket.com/albums/n65/VL_30_LT/VL_30_LT11.jpg
http://i109.photobucket.com/albums/n65/VL_30_LT/VL_30_LT8.jpg
http://i109.photobucket.com/albums/n65/VL_30_LT/Engine5.jpg
http://i109.photobucket.com/albums/n65/VL_30_LT/surgetank.jpg

I also have a complete and new microtech setup for it for sale.

What i have is:

*Microtech LT12S with RB30ET 6 coil map allready installed
*Brand new wiring harness to suit VLT
*Brand new Microtech X6 ignition box with wiring to suit
*6 coil setup
*LT series hand controller
*Laptop adapter for laptop tuning and map storage
*Laptop Tuning software
*All new plugs for all injectors and sensors
*2 new laptop and hand controller cables.

This setup will run full sequential injection and ignition control

Dont be fooled peoples this is the top of the line available from microtech. There is over $2500 worth here.
If sold it will be sold as a complete setup, i will NOT split any of it.

http://i109.photobucket.com/albums/n65/VL_30_LT/Microtech.jpg
http://i109.photobucket.com/albums/n65/VL_30_LT/Microtech1.jpg

Asking price : VL Turbo $6000
Microtech setup : $1600

If someone buys both at the same time i will drop the total price to : $7400

[VXCAL346]

In reply to the pm i recieved i cant reply yet because apperently i dont have enough of a post count. For some reason it said that the other day i had 9 posts on here and have since made 3 posts yet my post count is still 9 therefore i cant reply to pms.



Hi Mate

May be interested.

You run this thing down the Qtr mile? If so, how did she go?

How hungry is she on juice? Not so much worried about when you are giving it to it, but more interested on cruising - i.e. highway driving.

Whats the general upkeep going to be on the VL Turbo? One this modified I don't want to spend more time fixing her than driving.

Also, have you got any interior pics.

If so can you email them to XXXXXXXXXXXXX

cheers mate
Ash

havent been able to run it down the qtr yet but all indications say it will easy run low 12's. And with the microtech installed and tuned at will easily cracked into the 11's. Microtech setup is also for sale for $1600 on its own or $1400 with the car

When cruising the fuel is very good around 11ls/100k on freeway and around 16-17ls/100k for city driving.

So far it hasnt let me down once. The gearbox bearings are a little noisy but it will come with a full rebuild kit with every bearing, seal and gaskets. Also comes with brand new 2nd and 3rd synchros in the rebuild kit which are no longer available. These were the last set of new synchros available anywhere to suit the MX7 box. I had these sent down from QLD.

Havent been able to get any interior pics yet but there is not really allot to look at in the interior, its got VY II S Pack front and rear seats original beige carpet,door trims and hoodlining. Carpet is getting a bit old now but door trims and hoodling still good. Near new full set of seat belts will also come with the car as i havent had time to put them in yet.

Hope this helps.
Shannon.
slyons_77@optushome.com.au

[VXCAL346]

Sold!!!!!!!