TBA throttle body - Pics are up

[chev]

We fitted a Throttle Bodies Australia t/b to JT's engine last night. Bolt off bolt on. No laptop:teach: The throttle response was orsome and picked up 7rwkw. Same night,same air(no grog:p ). Bloody grouse units. Thanks TBA for a well presented product that works. (horne bit of gear).Will get JT to reply with his thoughts. Cheers Chev

[MrMaad]

Sounds great, and what sort of $$ do these T/B's require?

[OLS108]

Great to see your as happy as the rest of us.
Dave

[chev]

Sounds great, and what sort of $$ do these T/B's require?

PM sent Trav. Works incredably well with the otrcai (or a pod):thumbsup:

[Invasionss]

Chev,

Can you send me some info on the TBA products for the LS1's please to this email address - jross@arach.net.au!
If you don't have anything that can be sent via email, i've sent a pm that has my home address.
I've emailed TBA ages ago for info, but they have ignored me!

Thanks
Justin

[chev]

Chev,

Can you send me some info on the TBA products for the LS1's please to this email address - jross@arach.net.au!
If you don't have anything that can be sent via email, i've sent a pm that has my home address.
I've emailed TBA ages ago for info, but they have ignored me!

Thanks
Justin

Evening Justin. Ring me at the shop in the morning on 03 97768833 and I will get my secretary(Glenda) to email you some details on this grouseT/B. They are finishing a TB for PWR and I hope for Harrop. I need to speak to the boys when I finish all my booked in work. Chev

[spank]

evening chev, ive told darren ( the guy with the clubby the same color as yours) about these and when you do his edit you might have to put one on his car, can you do back to back runs for him with and without this tb and with otrcai and then two hole mod airbox and your gts pipe and boot ?
by the way the shudder is gone from the brakes in my limo so thanks again for machining my discs at very short notice :thumbsup:

[Invasionss]

Thanks Chev, will do

Justin

[chev]

evening chev, ive told darren ( the guy with the clubby the same color as yours) about these and when you do his edit you might have to put one on his car, can you do back to back runs for him with and without this tb and with otrcai and then two hole mod airbox and your gts pipe and boot ?
by the way the shudder is gone from the brakes in my limo so thanks again for machining my discs at very short notice :thumbsup:

Good to hear that the brake shudder has gone. No dramas in doing back to back dyno runs. We did the same last night on JT's SS. Need him online to give his unbiased opinion.

[JT]

ok,my thoughts on the TBA are,huge improvement in throttle response,a much more pleasureable drive(and lots of fun)

[brentonsav]

nice work chev, as always!
jt must be a happy man cruising around in his mule!!

ill be the first one :worthless:

[JT]

pics will be up when chev emails them to me to host

[throttlehappy]

We fitted a Throttle Bodies Australia t/b to JT's engine last night. Bolt off bolt on. No laptop:teach: The throttle response was orsome and picked up 7rwkw. Same night,same air(no grog:p ). Bloody grouse units. Thanks TBA for a well presented product that works. (horne bit of gear).Will get JT to reply with his thoughts. Cheers Chev

thats great to hear gary! not only do they look great they perform great aswell. its defiantley on my list of future mods now :thumbsup:

[seldo]

We fitted a Throttle Bodies Australia t/b to JT's engine last night. Bolt off bolt on. No laptop:teach: The throttle response was orsome and picked up 7rwkw. Same night,same air(no grog:p ). Bloody grouse units. Thanks TBA for a well presented product that works. (horne bit of gear).Will get JT to reply with his thoughts. Cheers Chev
That pretty much tallies with what i got too. They're pretty good, and really good blokes to deal with - very helpful.:)

[cosmo vyss]

That pretty much tallies with what i got too. They're pretty good, and really good blokes to deal with - very helpful.:)

Suprise suprise suprise. After having one of these fitted to my car and doing a few dyno runs. The car made more power and the throttle response was great, a marked improvement over stock. TBA also have a web site.

There are quite a few guys on here that have them are very happy and impressed with the results they got.

[VooDoo]

I was in the TBA workshop yesterday and DAMN they have some nice stuff there. Hopefully they might post up some pic's of their other products soon as they are just as impressive as the TB's (they do a lot more than just throttle bodies)

[Invasionss]

If they post up some pictures of their LS1 stuff, this would be awesome. Their site is pretty bloody boring, doesn't explain much at all, very limited!!!

I asked for information from them to be sent to me & nothing still. i emailed them about 2 months ago. Great customer service there!

Justin

[macca33]

Again, kudos to Chev, well done JT and great product, TBA.

Chev, I'll be in touch soon, I may require one of these said TB's when I get home in May.

Cheers,

Macca

[chev]

Have you got some pics Chris. I have them in my digital but need to get them to JT. What about the anodized ones?:thumbsup:

[HSV,_I_GOT_ONE]

ARGH!!! I must have those engine covers!!!! Do you have them in orange or gold and how much??

[chev]

Hey Chris. Bloody good bit of gear under your hood. Can't wait for the Harrop t/b

What dust??? Do you do those horne rocker covers aswell?

[BLACK 346]

ARGH!!! I must have those engine covers!!!! Do you have them in orange or gold and how much??

You mean the rocker covers I assume? With those beauties
you don't really need engine covers.

[JT]

love those covers!!
anodised tb looks horn

[OLS108]

one of the Tidest looking bays around.
Love your work.
Dave

[chev]

OhOHOh that looks horne Chris. That t/b will match perfectly to my new otrcai:yahoo: With a little more boost(complements of a smaller pulley,thanks Ken & Damien) 2 bar tune=Bloody ripper:thumbsup:

Hey Chris. Whats that in the background nesting between chassic rails?????

[VooDoo]

Chev, it has twin turbo's (big ones), V8 Supercar diff, brakes bigger than most ppls rims and a nice big LS1 up front... all in a hotrod body. Once its done im pretty sure its going to outpower and outdrive almost any car on the road.

[v-comp]

OhOHOh that looks horne Chris. That t/b will match perfectly to my new otrcai:yahoo: With a little more boost(complements of a smaller pulley,thanks Ken & Damien) 2 bar tune=Bloody ripper:thumbsup:

Hey Chris. Whats that in the background nesting between chassic rails?????
The T/B will look and work a treat Gary and as for what's nesting between the rails of the '32-----think Chip Foose building a rod for Mark Skaife;)

[v8 ute]

... as for what's nesting between the rails of the '32-----think Chip Foose building a rod for Mark Skaife;)


But taking ten times longer :p ;)

[shawie]

I was in the TBA workshop yesterday and DAMN they have some nice stuff there. Hopefully they might post up some pic's of their other products soon as they are just as impressive as the TB's (they do a lot more than just throttle bodies)



where exactly is there workshop voodoo.

[JT]

just a few snaps I took tonight
http://home.wildit.net.au/jt/tba/tba1.jpg
http://home.wildit.net.au/jt/tba/tba2.jpg
http://home.wildit.net.au/jt/tba/tba3.jpg
http://home.wildit.net.au/jt/tba/tba4.jpg
there will be more pics in the next few days

some more pics
http://home.wildit.net.au/jt/tba/tba5.jpg
http://home.wildit.net.au/jt/tba/tba6.jpg
http://home.wildit.net.au/jt/tba/tba7.jpg
http://home.wildit.net.au/jt/tba/tba8.jpg

[throttlehappy]

that looks great

[MrMaad]

HOT! The throttlebody, the rocker cover plates and the Rod. Nothing else to say other than awesome! Hows the milage JT?

[VooDoo]

Ill have to introduce Chev to a pressure cleaner and some degreaser for these engine bays :stick:Also why do a TB mod yet you dont have extractors yet. I would have thought the basic bolt-ons would come first. (just a question, dont shoot me :) )

Hopefully my 90mm TBA and Ported LS2 manifold is on the barge now.. Cant wait!

[shawie]

Where are these throttle bodies avaliable from and how much for one of these babies?:p

[chev]

Ill have to introduce Chev to a pressure cleaner and some degreaser for these engine bays :stick:Also why do a TB mod yet you dont have extractors yet. I would have thought the basic bolt-ons would come first. (just a question, dont shoot me :) )

Hopefully my 90mm TBA and Ported LS2 manifold is on the barge now.. Cant wait!

Hey VooDoo. Jt's booked his vehicle in Friday. Will have to clean her. I have a pressure washer but water regs say no.:idea:


that looks great

Hey Luke. We have red anodized ones that would look great on your VXSS:love:

[JT]

Hows the milage JT?
about the same as before

Ill have to introduce Chev to a pressure cleaner and some degreaser for these engine bays !i'm afraid thats my laziness

:stick:Also why do a TB mod yet you dont have extractors yet. I would have thought the basic bolt-ons would come first. (just a question, dont shoot me :) )it was a spur of the moment thing,we were just eager to see the difference compared to a stock t/b.
headers will be coming soon.

[throttlehappy]

Hey Luke. We have red anodized ones that would look great on your VXSS:love:

thats great, have you got any pics of those?
other wise ill have to check em out when i come in for the 70 thou service
talk to you soon

[JT]

pics have been updated,a huge thanks to Chev for making her look like she is supposed to

[chev]

Does JT's engine look better now VooDoo?

[Y55-7UT]

wondering what the go is with the cruise control as that tb doesnt have the bolt thingo for it, unless thats to suit that 01 vx??

[VooDoo]

Much better mate. Look forward to seeing it at the Nats :D

[chev]

http://i147.photobucket.com/albums/r290/v-comp/DSCF0029.jpg
http://i147.photobucket.com/albums/r290/v-comp/DSCF0027.jpg