Oil Filler Neck Removal on GenIII

[Invasionss]

As the titles states, does anyone know how you remove this without breaking it?

I want to remove it & try to take the best possible photo i can before i use mainlubes flushing oil to see what the difference is after the flush.

Justin

[macca_779]

As the titles states, does anyone know how you remove this without breaking it?

I want to remove it & try to take the best possible photo i can before i use mainlubes flushing oil to see what the difference is after the flush.

Justin

just wiggle it off mate

[Invasionss]

Thanks Macca_779, will try soon.

[VNV8]

doesnt it just twist off?

[vr5speedv6]

"YES, their is one big tab that goes into a grove but their is also another smaller plastic tab that has to be pushed from the inside with some sort of small tool like an icepick, depress this tab and it will free the filler neck, see photo below." (http://www.ls1tech.com/forums/generation-iii-external-engine/63489-oil-filler-neck-removal-breather-part.html)

http://www.ls1tech.com/forums/attachments/generation-iii-external-engine/229928d1272741678-oil-filler-neck-removal-breather-part-img_4102.jpg