View Full Version : Kyb Agx
VKPWR
30-04-2007, 08:15 PM
Hi Folks,
recently bougth a car with KYB AGX shocks all round... VY 11 Calais
How can i find out they are short storke ? or are they all?
asking cause i am wanting to lower it wiht new springs as its has standard VY calais springs :(
Wonky
30-04-2007, 08:19 PM
I suspect they are unlikely to be short stroke as there's no reason for someone to do that with standard springs. I assume they're not adjustables? Any model number on them?
VKPWR
30-04-2007, 08:23 PM
AGX are the fully adjustable... 8 settings... so far cant find part numbers.. may need hoist :(
must admit have not looked that hard
CeeVee8
30-04-2007, 09:26 PM
They are the same length as the stock monroe (FE2) ones I changed them for in my Monaro. So no they are not a short body type.
4 way adjustable on the front struts and 8 way adjustable on the rear.
R Dirty 3
30-04-2007, 09:31 PM
Front AGX are shorter body. Rear are standard stroke length.
Even though the front are a short body, they are more than suitable for a standard height vehicle, same as KYB short body (834001-834002) are also able to work well with in a standard height car.
VKPWR
01-05-2007, 12:21 PM
so i should have no problems wacking in
SL in the front & SSL in the rear king..
any parts numbers
R Dirty 3
01-05-2007, 05:20 PM
Just to clarify the front strut body length issue,
KYB Excel-G Standard p/n 334313 Body length 402mm
KYB Excel-G Lowered p/n 834001 Body length 382mm
KYB AGX Adjustable p/n 734015 Body length 382mm
Hope that helps
Cheers
Brad
p.s. those part numbers are for right hand side only.
whinternational
01-05-2007, 05:27 PM
I have these in the front of my stato and it sits on its guts...no problems! I actually is better on the firm setting as there is less play and therefore less exhaust scrapping.
R Dirty 3
01-05-2007, 05:29 PM
Id say leave them on hard then if you can handle the "harsher" ride. Some people can, some people cant. :)
so i should have no problems wacking in
SL in the front & SSL in the rear king..
any parts numbers
Would love to help you out with spring part numbers, but i dont use Kings. I use Lovells. If interested, my guess would be HFL-70SL Front and HRL-66 in the rear :)
Cheers
Brad
VKPWR
02-05-2007, 02:00 PM
Thanks guys!! you all rock ;)
I rang Kind had a chat and we I ordered these puppies today
KHFL-47HD
KHRL-SLHD
....
once done ill post pics...
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.