VT Exec Wiring

[mopar_maniac]

I have put a VX SS front on on my VT exec & want to get the foggies working, there is a plug @ the front of the car for the light connection & i have ordered a new facia that has a fog light switch, how would i connect that fog switch up, like would my exec have the wiring already there for that switch? & if not how can i hook it up?

[BOBGEN111]

PM sent.
Rob

[SiLENCE]

I have put a VX SS front on on my VT exec & want to get the foggies working, there is a plug @ the front of the car for the light connection & i have ordered a new facia that has a fog light switch, how would i connect that fog switch up, like would my exec have the wiring already there for that switch? & if not how can i hook it up?

yeah mate.. the plug for the switch should be visible when you open the panel that covers teh fuses - it will be taped up on the top right hand side.
All you need to do is plug it in to the button, fit a relay into the underbonnet fuse box, plug the lights in and away you go.

I did this last week when i fitted a VZ monaro front to my exec.

cheers

Adam

[EXCESSV]

the wiring and plugs may or may not be there.
in my VT Exec they werent there so i bought the wiring with plugs that should have been there from holden and started connecting away...in the end looked like a factory job

to know if the wiring is there its as simple as opening the fuse cover in the engine bay above the battery. look at the spot where the relay should go for the foglamps...if the wiring is there ie: can see the clips plugged into the board from underneath then it will be an easy job...
if not your gonna have to replicate the factory wiring