Guard Rolling South of Perth

[heavyduty1340]

I need to get the guards rolled on the Monaro , does anyone know of someone south of Peth who can do a good job of this?

While Im here , does anyone know if the offset on XHP mags is the same as Holdens?

I want to put Dirty Dogs on it in 18x8.5 with 265x35x18 on the rear and 235x40x18 on the front - will they fit ok??

Cheers

[EL SLAMO]

I need to get the guards rolled on the Monaro , does anyone know of someone south of Peth who can do a good job of this?

While Im here , does anyone know if the offset on XHP mags is the same as Holdens?

I want to put Dirty Dogs on it in 18x8.5 with 265x35x18 on the rear and 235x40x18 on the front - will they fit ok??

Cheers

Hi Ian,

We can do guard rolling. We are based in O'Connor.

Rims come in various offsets so its important that the correct offset is placed on the vehicle. Especially if you are planning on running a 265 on the rear, the offset must be correct.

As discussed we can guarantee fitment of those rims on your car with the 235front/265 rear combo.

If you would like some pricing on rims please PM me!!

Hope this helps :),

Nick

[VYSHSV8]

I need to get the guards rolled on the Monaro , does anyone know of someone south of Peth who can do a good job of this?

While Im here , does anyone know if the offset on XHP mags is the same as Holdens?

I want to put Dirty Dogs on it in 18x8.5 with 265x35x18 on the rear and 235x40x18 on the front - will they fit ok??

Cheers

Auto FX can do guard rolling and he is mobile he is south of the river and for tyres you can get 275'under the rear no prob...

Drew

[vxSSilver]

beau repairs in mandurah also does guard rolling.

Cheap and did a great job on my SS

[dyno junkie]

Auto FX can do guard rolling and he is mobile he is south of the river and for tyres you can get 275'under the rear no prob...

Drew

Hi Drew,

Do you have a contact number for Auto FX?
Our new wheels should be here soon and am going to need to get guards rolled.

[VYSHSV8]

Hi Drew,

Do you have a contact number for Auto FX?
Our new wheels should be here soon and am going to need to get guards rolled.

PM sent mate...

[heavyduty1340]

Well I got my new boost rims on Wed , then fitted 265x35 kumhos to the rear set on thurs
Next , I needed to get the rear guards rolled to fit them on - shot a call to Autofx , but their phone kept cutting out so I tried Beaurepairs in Mandurah
Yep come straight up and we'll do it

Got up there at 3.30pm and I caught up with Brad and he got straight on with it

An hour later I was on my way back to Busselton - all sweet


And to all the tyre fitters that said 265's wont go on a monaro :flipoff::flipoff: it was a piece of p1ss

Thanks for putting me on to Beaurepairs

[diabolic]

Hey mate where abouts in Busselton are you, got any pics of your ride? Might have seen you around...

[BLQWN]

Yep, Brad's the man in Mandurah for rims and tyres. Since he took on running Beaurepairs they've gone from strength to strength and has done heaps of custom stuff.
cheers

[KPWISHN]

Another vote for Brad. Seen some good stuff come out of there.

[dyno junkie]

Well I got my new boost rims on Wed , then fitted 265x35 kumhos to the rear set on thurs
Next , I needed to get the rear guards rolled to fit them on - shot a call to Autofx , but their phone kept cutting out so I tried Beaurepairs in Mandurah
Yep come straight up and we'll do it

Got up there at 3.30pm and I caught up with Brad and he got straight on with it

An hour later I was on my way back to Busselton - all sweet


And to all the tyre fitters that said 265's wont go on a monaro :flipoff::flipoff: it was a piece of p1ss

Thanks for putting me on to Beaurepairs



I'm surprised that you needed to get your guards rolled for that size tyre!

Currently got 235/40/18 & 265/35/18 tyres on our CV8 and there is a lot of clearance around the rear wheel arches.

Getting the guards rolled next Tuesday to fit up the new 245/35/19 on 19"x8.5" fronts and rear 275/30/19 on 19"x9.5".

[heavyduty1340]

I have had it lowered , hence the need for rolling the guards -

I run 235x40x18 on the front and 265x35x18 on the rear - there was not a hope in hell of even bolting them on before rolling the guards

I drove to Mandurah with one wheel in the boot and one strapped to the passengers seat:eyes: - when I left the shop , the coppers where their so I had to try not to look like too much of a knob wrapping a wheel up in a doona and strapping it in to the passengers seat

I might have to put the original springs back in the rear as I fuelled up in Bunbury and just near Capel I went over a harsh dip at 110kmh and one rear tyre just touched in the arch - the kumhos cost too much to slice up


You may have seen it around Busselton although I dont bring it out of the shed all that often - its delpft blue with private plates and VZ bonnet with a rough idle

[diabolic]

Were you parked across the road from Dome about 10:30 or 11 this morning?

[berroca]

i am pretty sure the offset of the xhp rims are different, i had the xhp boost rims put on mine last week 18.8.5 with 235/40's and superlows and i had to get my guards rolled

[1AFXWA1]

Just thought I'd share my joy of being having the first W427 Guard Rolling Job under my belt

http://i90.photobucket.com/albums/k271/autofxwa/PIC00033-2.jpg

http://i90.photobucket.com/albums/k271/autofxwa/PIC00029-3.jpg

http://i90.photobucket.com/albums/k271/autofxwa/PIC00031-1.jpg

http://i90.photobucket.com/albums/k271/autofxwa/PIC00032-2.jpg

Sorry if I sound boastish it just not everyday I get to do a job on a car I love so much

[cashie]

Looks good Des, great job on the guards..
White really suits these cars too...

[heavyduty1340]

Well done mate

It would be a buzz working on a car as sweet as that :goodjob:

[VYSHSV8]

Des you are supposed to ring me when you do jobs like that ;)

Just like Kay washing a car when next to her is a genuine xy phase III :bawl: owned by the same owner which she was detailing the bunky BMW for I wanna go for a ride in it haven't been for a run in 1 for 10yrs

[1AFXWA1]

Des you are supposed to ring me when you do jobs like that ;)

Just like Kay washing a car when next to her is a genuine xy phase III :bawl: owned by the same owner which she was detailing the bunky BMW for I wanna go for a ride in it haven't been for a run in 1 for 10yrs

in saying that I do have a XY to do in a couple of weeks

[VYSHSV8]

:):):):)........................Hey Des when ya coming over for a beer or 2 :)

[toey]

i have xhp boost wheels on my vy ss. they are 19x8.5 with 245/35/19 rubber and they rub the gaurds and the rear bumper where it joins the metal of the gaurd. this is ever so slightly but makes a horrid noise when it does. the car is still at fe2 height. its all good cause its getting the gaurds rolled in early january

as for the rims they are 42p offset for memory. hope this helps

[EXCESSV]

nice work Des...very jealous!

see u did it at APC in Perth...guess the owner is getting some work done :evil:

i have xhp boost wheels on my vy ss. they are 19x8.5 with 245/35/19 rubber and they rub the gaurds and the rear bumper where it joins the metal of the gaurd. this is ever so slightly but makes a horrid noise when it does. the car is still at fe2 height. its all good cause its getting the gaurds rolled in early january

as for the rims they are 42p offset for memory. hope this helpsrolling the gaurds wont stop the rubbing at the join of rear bumper and rear quarter panel.

[toey]

they are going to trim foo about 5mm where it is rubbing on the bumper aswell so the tyre will clear it

[vlcalais2005]

how much clearance does a guard rolling give exacly

[VYSHSV8]

they are going to trim foo about 5mm where it is rubbing on the bumper aswell so the tyre will clear it
It shouldn't be rubbing there I would get the alignment checked if I was you as I have 265/30/19 under mine and mines a little lower than yours and mine only touches with a boot load of Beer and a car full of kids my rims are 19x8.5..and have had the guards rolled but doesn't touch ate the bumper..

Mine only ever touched the bumper/rear guard when I had 275/40/18's under the rear and that was only because the profile was to high.... 275/35/18 would have cleared no probs...
http://i6.photobucket.com/albums/y243/VYSHSV8/IMG_2913-1.jpg
http://i6.photobucket.com/albums/y243/VYSHSV8/IMG_2914.jpg