PDA

View Full Version : Stripping VL 355ci



InsaneSS
21-07-2007, 05:32 PM
Hey guys
Due to not much interest in my whole car at the moment and getting silly offers from people i'm looking at stripping it down and selling it off if i get enough interest in the parts.

I would like to keep the driveline together, auto, single piece tailshaft and diff, will sell the motor complete and rebuilt but i will not be taking parts off the engine i.e carby, manifold.

I dont have power figures but it ran a best of 13.0@104MPH with 2000RPM stall as it kept creeping. Has pulled previously 190rwkw and before engine seized on the dyno it was roughly pulling 220rwkw.

Engine, Auto Diff and tailshaft i will be look for $8,500ono


Engine: $5000
Is still in final stages of being built.
360ci stroker.
harrop crank
hypertuetics pistons
race series bearings
Crane 288 solid cam
modified 750DP
single plain manifold
Minor worked heads
roller rockers
braided lines
Dizzy and new leads included

Nitrous: $700
NOS system 13lb bottle (full)
2inch spacer
Fuel and Nitrous solenoids and lines
Microswitch
100hp jets

Automatic: $1500
Turbo 350
Stage 2 shift kit
4000RPM stall
Rebuilt 2 years ago

Single 3inch tailshaft will go with the package or make me an offer

Diff: $2000
9inch
31 spline axels
Brand new 4.11 gears
Steel centered hemisphere.
Rebuilt and new gears installed last year hasn't done more than 100kms, receipt for $1400 from preston auto and diffs.

Fuel System: $400
1/2 inch fuel lines the whole way through the way (if wanted)
60L fuel cell in the boot with the fuel cut off switch.
brand new Carter fuel pump

Shell: Obviously not rolling $1000
Original Ice Blue Berlina
Built 1987
Usual bits of rust windscreens
Has a small hit/scrap on front right bumper.
Blue Interior (driver seatdirty otherwise clean)

Miscellanous: Make me an offer section!
3x Autometer gauges in sunglass holder (will find what type shortly)
Pacemaker extractors
twin 2.5inch exhaust into single 3inch (Not EPA legal)
twin 2.5 into single 2.5inch (EPA legal)
15inch silver ceptors with minimal tread
taillights
headlights
Radiator
Fan shroud/Fan
Momo Steering wheel

Car is located in northern suburbs of melbourne. Pm me if interested in any parts and once there is some serious buyers i will start stripping the car. I will post but at the buyers expense. Whole car is for sale for $10,500FIRM with no reg or rwc.
Cheers

http://http://i17.photobucket.com/albums/b91/InsaneSS/bay.jpg
http://http://i17.photobucket.com/albums/b91/InsaneSS/nos.jpg
http://http://i17.photobucket.com/albums/b91/InsaneSS/dash.jpg
http://http://i17.photobucket.com/albums/b91/InsaneSS/frontside.jpg
http://http://i17.photobucket.com/albums/b91/InsaneSS/backside.jpg

LS24U
21-07-2007, 07:05 PM
Can you send pics of the twin 2.5inch exhaust into single 3inch (Not EPA legal)??

InsaneSS
24-07-2007, 09:25 PM
Should have pics on the weekend. It's to suit a VL not sure if it will fit others but highly doubt it. Asking $450 with extractors or $300 without.
Gauges are autometer pro comp lite series. Volts, Oil Pressure and Water Temp asking $300 for 3.
Cheers.