Performance Shop in Perth

[bigtown]

Hi everybody,
Can you guys tell me about APC in West Perth. Has anyone had any work down there? I'm looking to get alot of work done. I like the look of the shop and the price is on par with most other shops, they also use HP tuner which is handy as I have a copy of my tune on my computer for a touch up because it was tuned in darwin.

Thanks Bigtown.:)

[RED R8]

Not sure on the west Perth branch but wangara is no good at all.I you want the absolute best service and attention go see

Chipmaster
WA Performance

YOU cannot go wrong...

[bigtown]

I have a quote from WA Performance. But they don't fit the parts I want. I have also rang Chipmaster and nobody answered the phone.

[KPWISHN]

If you are gunna start a fair spend up, go to the people with experience with proper big combo's. Chipmaster, SQP and MWS.

[Delco]

I have a quote from WA Performance. But they don't fit the parts I want. I have also rang Chipmaster and nobody answered the phone.

We get very busy , ring the mobile if you cant get through 0412770696 or email info@chipmaster , you will get a reply the same day :)

APC do a reasonable exhaust

[hsv364]

I have a quote from WA Performance. But they don't fit the parts I want. I have also rang Chipmaster and nobody answered the phone.

What parts are they ?
Are you looking at fully building bottom end ?
Give me some details in what your looking to do so i can help point you in the right direction :)

clinton

[bigtown]

I'm looking at getting a Billet Shifter, Z Grip, Otr, Harrop Diff cover couple of runs on the dyno touch up of my tune. They hp tuner Which I have a copy of my tune. As I said it was tuned in darwin.

Regards Bigtown

[hsv364]

I'm looking at getting a Billet Shifter, Z Grip, Otr, Harrop Diff cover couple of runs on the dyno touch up of my tune. They hp tuner Which I have a copy of my tune. As I said it was tuned in darwin.

Regards Bigtown

Cool ..

At the end of the day mate im sure both forum sponsors can supply and fit your products for you ... they do that run of the mill stuff everyday :)
You have to take a step back at some workshops and not get blinded by all the bling bling hanging up in there showrooms because that is usually is a deterrent to all the crappy results and work they do .. Just because they got big flash workshops doesn't necessarily mean there any good.
You have to make your own mind up ! If your not comfortable spending your money at one place well don't .. go elsewhere . Any forum sponsor on here wont do you wrong as they have there reputation on the line being affiliated with this forum.. don't listen to the go here go there bullshit from others stick to the sponsors and you cant go wrong

[RED R8]

Cool ..

At the end of the day mate im sure both forum sponsors can supply and fit your products for you ... they do that run of the mill stuff everyday :)
You have to take a step back at some workshops and not get blinded by all the bling bling hanging up in there showrooms because that is usually is a deterrent to all the crappy results and work they do .. Just because they got big flash workshops doesn't necessarily mean there any good.
You have to make your own mind up ! If your not comfortable spending your money at one place well don't .. go elsewhere . Any forum sponsor on here wont do you wrong as they have there reputation on the line being affiliated with this forum.. don't listen to the go here go there bullshit from others stick to the sponsors and you cant go wrong

What he ^ said.

[EXCESSV]

i used APC store that you went to as i know Jim from a little while back.
only did exhaust and billet quickshifter for my VE and was happy...

apart from exhaust i probably wont really use them for other work as WA Performance and Chipmaster look after me with everything else.

[Steakman]

Haven’t been there but I can recommend Chipmaster.
If the Mrs let me spend any more money :nono: I would be back there in a flash.

[priddy7]

I can say that chip master is very helpful . He will answer any question. And he does not put the hard sale on you to buy stuff you don't need .I know because i just got off the phone to him. Thanks for you help Delco, I'll keep in touch about the cvs cai and mafless tune sounds to good to not have ..

[Delco]

I can say that chip master is very helpful . He will answer any question. And he does not put the hard sale on you to buy stuff you don't need .I know because i just got off the phone to him. Thanks for you help Delco, I'll keep in touch about the cvs cai and mafless tune sounds to good to not have ..

Intakes will be in stock next week :)

[WAVESS]

I can say that chip master is very helpful . He will answer any question. And he does not put the hard sale on you to buy stuff you don't need .I know because i just got off the phone to him. Thanks for you help Delco, I'll keep in touch about the cvs cai and mafless tune sounds to good to not have ..

Ill second that, Hes a busy guy ,for a reason but still makes time to answer any question I have.

[cashie]

I can say that chip master is very helpful . He will answer any question. And he does not put the hard sale on you to buy stuff you don't need .I know because i just got off the phone to him. Thanks for you help Delco, I'll keep in touch about the cvs cai and mafless tune sounds to good to not have ..

Can you guys stop phoning Daniel so he can finish doing my manual conversion? :lmao:


Intakes will be in stock next week :)

Can you stop answering the phone and finish fitting my box.. :smilesandbanana:

[SSidewayz]

APC do a reasonable exhaust

They do very nice exhaust systems no doubt. For some reason 'wounded bull' comes to mind when asking for quotes.

[cashie]

They do very nice exhaust systems no doubt. For some reason 'wounded bull' comes to mind when asking for quotes.


I've found the same thing...

[EXCESSV]

They do very nice exhaust systems no doubt. For some reason 'wounded bull' comes to mind when asking for quotes.


I've found the same thing...never had that problem with them
went in for a yarn and they gave me price there and then.
i couldnt get out of there coz the guy kept talking

[VYSHSV8]

Can you stop answering the phone and finish fitting my box.. :smilesandbanana:

Well stop ringing him :rofl:

[cashie]

Well stop ringing him :rofl:

Good point..... :jester:

[Timmay5.7]

Looking at the stuff you want... Have you given Pro Auto performance a call?
They are also a sponsor...

[bigtown]

Yer I did the ring around. Chipmaster Wouldn't supply the Zgrip would fit it if I supplied it then wouldn't warrenty it. I rang Pro Auto aswell. I going with WA Per. Booked in on the 5 Nov I will be track side 7 Nov looking do have a go down the black top.

[hsv364]

Yer I did the ring around. Chipmaster Wouldn't supply the Zgrip would fit it if I supplied it then wouldn't warrenty it. I rang Pro Auto aswell. I going with WA Per. Booked in on the 5 Nov I will be track side 7 Nov looking do have a go down the black top.

Good choise
I had WA Perf supply and install my tex. I cant speak more highly about the service and the quality of the product is awsome ! You will be very happy mate . You made a very wise choise ! all the best :)

clinton

[donger47]

i got my 2.5 twin SS custom at APC in wangara..........expensive but good ...and yes henry does like chatting about v8s............

[stompa]

My car is at MCE Motorsport at the moment getting some work done i highly recommended them.

[smatta]

My car is at MCE Motorsport at the moment getting some work done i highly recommended them.

Tim the mechanic there is really good .
I get all my work done a Commodore Service centre , but you need to be patient.

[RED R8]

My car is at MCE Motorsport at the moment getting some work done i highly recommended them.
What are you having done ? The boys at MCE are top notch and lovingly brought my VE to life..:bow:

[tim_k]

My car is at MCE Motorsport at the moment getting some work done i highly recommended them.


Another thumbs up for Terry and the lads at MCE. :thumbsup:

[stompa]

What are you having done ? The boys at MCE are top notch and lovingly brought my VE to life..:bow:

just got it retuned. terry really knows what he is doing i am thrilled with the result and his customer service is excellent as i have been to a few workshops now and they just take your money and run