View Full Version : vx headlight removal
shaunv8
15-01-2008, 07:31 PM
hi all, does the bumper have to be removed to replace the lights. Are there any threads that show how to do this. I searched but no luck. Thx shaun
yep, you gotta remove the bar, very simple. 2 screws each side in the front of the wheel arch, one for the inner guard and one that holds the bar to the guard. unplug foglamps if any, 3 screws above the grille anf two clips in the recess below the number plate. these face up and clip into the bar support. the bar is clipped into the guard each side and needs some gentle persuasion to pop off
Mungrel
15-01-2008, 07:52 PM
As BPM said,
one thing i always do though, is leave the middle screw at the top of the bumper finger tight so that once the bumper unclips itself either side, it doesn't fall to the ground :)
DaveHAT
15-01-2008, 08:22 PM
As BPM said,
one thing i always do though, is leave the middle screw at the top of the bumper finger tight so that once the bumper unclips itself either side, it doesn't fall to the ground :)
Yep ... that and lay a doona or similar on the ground under the bar so you dont scratch it when you remove it.
:)
chilly
16-01-2008, 04:37 AM
Yep ... that and lay a doona or similar on the ground under the bar so you dont scratch it when you remove it.
:)
i knew we had more in common than good looks mate
http://chilly.theddrzone.com/public/Remove%20F%20Bumper%20.JPG
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.