Wanted: VY/VZ power window wiring diagram

[Waughy]

Hoping someone can help. I'm looking to fit the VY/VZ main power window switch assembly to my VL as the factory switches are dead and I'm not paying $150+ for second hand, or $350 for new. I can get a VY switch assembly for under $80, just need to know the pinouts so I can adapt it to the VL wiring. It has been done, but the person who does the fit won't pass on the details I'm after as he does it as a business and doesn't want to share his knowledge. If I can get the wiring diagram I'll be fine wo do it myself. Let me know if you can help.

Cheers.

[TommyVTss]

just use a multimeter on ohms?

[Waughy]

I could, but it would be a lot easier if I knew which pin was for which wire. I have the VL diagrams, would make the job a hell of a lot quicker if I knew in advance where the wires have to run.

[RIDE:42]

all in here fella http://www.hsvdriversclub.co.uk/ls1.pdf

[Waughy]

Thanks, but that seems to be all GENIII engine stuff, couldn't see anything on the power window wiring.

[iamhappy46]

just use a multimeter on ohms?

The unit is electronic and needs power applied for it to get continuity across the relevant pins. Not a simple task.

I did write down some notes when I was trying to sort the power window problem in my ute, will see if I kept the notes of what wire goes where.

[Waughy]

Ok, got the switch, still need the pinouts if anyone can help.

[Waughy]

All set to go, then found the switch block pins are not labelled. I know what colour wire goes to what pin, just don't know what pin is which. If anyone can help there, or have a pic of the VY/VZ power window loom under the centre console, showing the plug and which wires go where, that should help a lot.

All sorted, VY switches ready to go into the VL.

[garth1976]

I've got the wiring for the vx vh. think the wiring this the same.
email me and i'll send them to you. cant work out how to attach them to this post
garth1976@westnet.com.au