PDA

View Full Version : FS: CompCams 228 Cam suit Gen III (LS1 – LS7)


Rad Kane
09-03-2008, 04:01 PM
http://i26.tinypic.com/4zt2td.jpghttp://i31.tinypic.com/34jf9za.jpghttp://i28.tinypic.com/9i7ncx.jpghttp://i25.tinypic.com/33v19gg.jpg


http://i31.tinypic.com/2cfrrpd.jpghttp://i32.tinypic.com/e6szn8.jpg


The cam is like new it was in the car for approx. 2000miles (3200km), it’s in perfect condition. It is a very strong street/strip performer with a pretty decent lope to it. Please click on the sound link below for a cam with similar timing specs. http://www.compcams.com/Base/MultiMedia/SoundBytes/Cams/XER-287HR-12(LS1).wav

I have included a dyno sheet from the previous owner of the cam. His mods are listed on the dyno sheet. Through an A4 auto it made 299rwkw. Cam also comes with the cam card. I brought this cam from the States, but have not installed it.

The specifications are as such: 228°/228° @0.050”, 0.571"/0.571" lift, 113° LSA, 111° intake centreline, 281° Rated Duration.

Comes with the safe XE profile that also maintains importantly high vacuum down low.

Please PM me or give me a call on 0421 139 469 with any questions.

Sell for $520 ono.
ovt55
10-03-2008, 06:26 PM
mate is this cam lumpy on idle or not 2 bad
Y55-7UT
10-03-2008, 08:30 PM
listen to the sound wave attached, ill be goin a cam very similar to this in the next month or 2 and is noticably lumpy but will be relatively good on fuel
Rad Kane
10-03-2008, 08:34 PM
It's not lumpy, but it has a pleasant lope, download the sound wave and play.:)
ovt55
11-03-2008, 05:26 PM
ok that sounds good wat else would need 2 be done 2 the motor when installing it
ovt55
11-03-2008, 07:09 PM
that sounds fuking tuff wat is the power range of it
Rad Kane
11-03-2008, 08:29 PM
ok that sounds good wat else would need 2 be done 2 the motor when installing it

Just Springs to take the lift (if you do not have them fitted already)


that sounds fuking tuff wat is the power range of it

Re Power: Check the dyno sheet above that substantiates the awesome power it makes, yet its great for the daily driver.

Re Sound: Well, you and others (who know their sh.t) will be re-assured that you got a mean stick in it. Yet, as said before, "not over the top".
ovt55
18-03-2008, 09:10 AM
hey is this a rolla cam
Rad Kane
18-03-2008, 07:16 PM
Hi Adrian,

Yes, it is.

Don't forget tomorrow is Wednesday.
ovt55
19-03-2008, 07:10 PM
hey mate apart from springs would i have 2 get mafless tune aswell or will it be alrite till i do
Rad Kane
19-03-2008, 07:54 PM
Hi Adrian,

You do not need to get Maffless at all. It will work just fine with the Maf.

If you like give me a call on 0421 139 469 and I will explain/advise.