PDA

View Full Version : FS: Sureflo dual 3" stainless exhaust, headers and cats for VZ Monaro/GTO


jwilson
18-03-2008, 10:32 AM
Hi All,

I have the following complete exhaust system for sale in Sydney:

* Sureflo dual 3" stainless exhaust (Medium/Loud)
* Sureflo HPC-coated short headers
* Ballistic metal substrate cats

The exhaust is currently fitted to my VZ GTO. Interested parties are welcome to come and see/hear the exhaust -- but please, no time wasters. I can arrange for it to be seen/heard in the city during the week (Pitt St, Sydney) or in the Sutherland Shire at night.

The exhaust has done about 14,000kms on the car.

Has the usual Sureflo deep/tough note.

Cost me well over $3,500..

Asking $1,800. BARGAIN.

Will fit VZ Monaro and GTO (quad-pipe setup).

Selling due to wanting something a little quieter............... and a turbo or two.

Enquiries to jwilson@lithiumcorp.com or PM me here.
Thunder
18-03-2008, 01:32 PM
The Turbo's will quieten the system without doing anything else.

We can also make the system quieter for you if you don't sell it.

Cheers
Greg
jwilson
25-03-2008, 02:35 PM
Exhaust is still for sale.

Will accept offers above $1,000
BerlinaVT
28-03-2008, 06:32 PM
Hi,

Interested in the extractors and Cats as I already have a Sureflo Dual 3 inch exhaust.

What size are the Cats?

Will you sell the Extractors and Cats for $500

Please PM me as I can not PM you - not enough posts:bawl:

Thanks Ian
hsvgts196
28-03-2008, 09:38 PM
Yeah if you are willing to split the cats and extractors from the system I am interested as my GTS Coupe is a single exit not dual. Let me know by PM or here.
dannyz
23-04-2008, 10:53 AM
still for sale??
Banks_vz
04-09-2008, 10:59 PM
Is this exhaust still for sale mate?

How much modification is required to fit a ute?
Thunder
05-09-2008, 09:11 AM
Is this exhaust still for sale mate?

How much modification is required to fit a ute?

The system is a one out each side.
To fit a ute it would have to be lengthened and the tailpipes may have to change to fit your cutout.

Cheers
Greg
Banks_vz
05-09-2008, 10:19 AM
The system is a one out each side.
To fit a ute it would have to be lengthened and the tailpipes may have to change to fit your cutout.

Cheers
Greg

Oh ok, Where are you located jwilson?

What you you say it should cost to do those modifications thunder?
HRT 8
05-09-2008, 02:35 PM
Oh ok, Where are you located jwilson?

What you you say it should cost to do those modifications thunder?

Jwilson is banned and will not get your reply. He is located in Sydney.
Thunder
05-09-2008, 07:04 PM
Oh ok, Where are you located jwilson?

What you you say it should cost to do those modifications thunder?

The biggest modification is putting the second cut out on the drivers side.
The plastic bar has to be cut.

Then there is the twin skinned beaver panel that has to be cut, lifted and re-welded - without damaging the harness that runs through there. Then there is the extra exhaust mount that has to be made and welded to the chassis, unless you buy a Maloo one. Approx $300 to do this.

To lengthen the system would cost another $120 in stainless. Then their is the tailpipes - which may or may not fit.

Cheers
Greg
Banks_vz
09-09-2008, 08:09 AM
I've already done the cut out for the other side :)

Any photos of this system mate so i can get a better idea? also where is jwilson located?