BLK-57L
22-04-2008, 03:28 PM
Up for sale is my 1999 VS Vortech supercharged ute.
***MOTOR***
Fully forged ecotec v6 2000 kms old
cracktested, blue printed block
decked and honed 30 thou over bore
aries forged race pistons
shotpeened rods
new fully balance crank
shotpeened cam with 50 thou lift.
new bearings all over
new double valve springs
new billet lifters
chromemoly push rods
heads flowed to 490 cfm
manifold to suit heads
EV1 injectors
T-Rex fuel pump
vortec rising rate fuel reg
***INDUCTION***
Vortech V2 supercharger
custom PWR intercooler
twin plumback blow off valves
pacemakers with twin 2 1/2" hi flo exhaust
Soon to have brand new custom 3" alloy cooler piping
***GEARBOX***
reconditioned Getrag 5 speed manual
custom billet flywheel with arp bolts
wrights heavy duty race clutch
***DIFF***
standard LSD 3.08
***BRAKES***
Clubsport calipers
DBA cross drilled and slotted rotors on front
***Wheels***
Rollin on near new 20 inch Dolce's with heaps on tread.
Ute has been tuned at Chiptorque and made 277 rwkw or 371 rwhp on safe tune. After custom alloy piping is done the ute will be back to Chiptorque for new Mafless tune which will see around a 40rwhp gain.
Wanting to sell to purchase first home.
Looking for around $18000 ono.
PM me here and we can take it from there
***MOTOR***
Fully forged ecotec v6 2000 kms old
cracktested, blue printed block
decked and honed 30 thou over bore
aries forged race pistons
shotpeened rods
new fully balance crank
shotpeened cam with 50 thou lift.
new bearings all over
new double valve springs
new billet lifters
chromemoly push rods
heads flowed to 490 cfm
manifold to suit heads
EV1 injectors
T-Rex fuel pump
vortec rising rate fuel reg
***INDUCTION***
Vortech V2 supercharger
custom PWR intercooler
twin plumback blow off valves
pacemakers with twin 2 1/2" hi flo exhaust
Soon to have brand new custom 3" alloy cooler piping
***GEARBOX***
reconditioned Getrag 5 speed manual
custom billet flywheel with arp bolts
wrights heavy duty race clutch
***DIFF***
standard LSD 3.08
***BRAKES***
Clubsport calipers
DBA cross drilled and slotted rotors on front
***Wheels***
Rollin on near new 20 inch Dolce's with heaps on tread.
Ute has been tuned at Chiptorque and made 277 rwkw or 371 rwhp on safe tune. After custom alloy piping is done the ute will be back to Chiptorque for new Mafless tune which will see around a 40rwhp gain.
Wanting to sell to purchase first home.
Looking for around $18000 ono.
PM me here and we can take it from there