HEXEM
03-05-2008, 01:33 PM
Hi All,
I did a quick search of the forum for this but was unable to find anything thus far.
I did an oil change on my car the 2 days ago.
What I have noticed is that the on dash oil pressure indicator reads 1 bar higher when I first start the car from cold or after a short trip (say 10klm). After I have been driving for about 20mins the meter is stable and doesnt change unless I come to a complete stop where it use to go to 2 bars (at the lights etc).
The meter doesnt go any higher than 5 bars. It sits at 4 bars when just crusing but if you increase the accelerator (not hard) it will jump to 5 bars.
When stopping it used to settle at 2 bars, it only does this after drive for a while.
This is the first time I have seen this as it used to not change from 4 bars at cold start (didnt change when you accelerated) and sit on 2 bars when you stopped (when Hot or cold).
Is there some process I missed when changing the oil?. I didnt remove the filter as it is brand new (1,000klm). The reason I change the oil (from Mobil1 10w30) is I wanted put the Valvoline ProBlend 10w/30 oil back in it which was used in the car from new and used at the previous dealer.
I have reset the oil life indicator and it shows 99% now.
Cheers
Phil
I did a quick search of the forum for this but was unable to find anything thus far.
I did an oil change on my car the 2 days ago.
What I have noticed is that the on dash oil pressure indicator reads 1 bar higher when I first start the car from cold or after a short trip (say 10klm). After I have been driving for about 20mins the meter is stable and doesnt change unless I come to a complete stop where it use to go to 2 bars (at the lights etc).
The meter doesnt go any higher than 5 bars. It sits at 4 bars when just crusing but if you increase the accelerator (not hard) it will jump to 5 bars.
When stopping it used to settle at 2 bars, it only does this after drive for a while.
This is the first time I have seen this as it used to not change from 4 bars at cold start (didnt change when you accelerated) and sit on 2 bars when you stopped (when Hot or cold).
Is there some process I missed when changing the oil?. I didnt remove the filter as it is brand new (1,000klm). The reason I change the oil (from Mobil1 10w30) is I wanted put the Valvoline ProBlend 10w/30 oil back in it which was used in the car from new and used at the previous dealer.
I have reset the oil life indicator and it shows 99% now.
Cheers
Phil