Tre-Cool
21-05-2008, 05:45 PM
Purchased 1 month ago. http://www.ls1.com.au/forum/showthread.php?t=90098&highlight=t1000
Kit only includes the following: (the above thread is when i purchased it)
1000HP Turbo (Garrett T51r SPL)
Manifold
Dump pipe
wastegate (currently making 10psi @ 3800rpm (10psi@3800rpm) on my car, supposably has a 7.5psi spring currently in the wastegate, however the 10psi spring is not in.:confused:)
cross over pipe
spark plug heat covers
standard drivers manifold (if needed)
T1000 intercooler kit, large piping includes 600x300x75mm intercooler
bosch bov's
Large K+N Filter
turbo oil feed line/return line
water line hoses,fittings etc
assorted clamps, hoses etc for plumbing turbo stuff.
ACL heatshielding for turbo hot side.
Thermo Beannie bag for Turbo Hotside.
Comes with the stainless steel pipe made to join to twin 3" difillipo system. (cost $700)
(piece a piss to install if you have a vz radiator and as such there is No longer a Water bottle relocation kit included as it's been installed on my dad's WH Statesman. Can be purchased direct from ASE anyway if needed.
ran on Dyno for tuning on the 20-5-2008 on my car.
Reason for sale? doesnt suit my engine capacity/compression level. 402ci-11.2:1 comp -we were making 570rwhp by 5200rpm but could not put any timing in past that point.
Ideally suited for a stock compression 5.7/6lt engine.
Bargain price of $5500ono.
I can even get it freighted to either brisbane,sydney,melbourne or adelaide for next to nothing.
Contact via mobile on 0437 337 076 or email david at vyssute.com
Will get pics and upload shortly.
Kit only includes the following: (the above thread is when i purchased it)
1000HP Turbo (Garrett T51r SPL)
Manifold
Dump pipe
wastegate (currently making 10psi @ 3800rpm (10psi@3800rpm) on my car, supposably has a 7.5psi spring currently in the wastegate, however the 10psi spring is not in.:confused:)
cross over pipe
spark plug heat covers
standard drivers manifold (if needed)
T1000 intercooler kit, large piping includes 600x300x75mm intercooler
bosch bov's
Large K+N Filter
turbo oil feed line/return line
water line hoses,fittings etc
assorted clamps, hoses etc for plumbing turbo stuff.
ACL heatshielding for turbo hot side.
Thermo Beannie bag for Turbo Hotside.
Comes with the stainless steel pipe made to join to twin 3" difillipo system. (cost $700)
(piece a piss to install if you have a vz radiator and as such there is No longer a Water bottle relocation kit included as it's been installed on my dad's WH Statesman. Can be purchased direct from ASE anyway if needed.
ran on Dyno for tuning on the 20-5-2008 on my car.
Reason for sale? doesnt suit my engine capacity/compression level. 402ci-11.2:1 comp -we were making 570rwhp by 5200rpm but could not put any timing in past that point.
Ideally suited for a stock compression 5.7/6lt engine.
Bargain price of $5500ono.
I can even get it freighted to either brisbane,sydney,melbourne or adelaide for next to nothing.
Contact via mobile on 0437 337 076 or email david at vyssute.com
Will get pics and upload shortly.