vtss 2000 series2, drivers seat base r/h plastic piece of crap,containing the switch adjuster,is broken away from seat, any advice to remove recline knob to remove said piece of crap...
Printable View
vtss 2000 series2, drivers seat base r/h plastic piece of crap,containing the switch adjuster,is broken away from seat, any advice to remove recline knob to remove said piece of crap...
Firstly, subject made me giggle! :PQuote:
Originally Posted by ltdslip
Secondly, take the seat out, should be much easier to work on then. Worth the effort.
Can you jimmy it off with a flat head?
Make sure you take abs fuse out before removing seat.
+1 good point, thanks.Quote:
Originally Posted by VTSSDUDE
the knob (hehe) is held on with one of those clips (like the ones that hold the window winders on on older cars, possibly called a U clip...) you can sometimes get them off with a rag behind it and pull side to side till it grabs the lugs to unhook it,.
ABS or AIR BAG Fuse?????Quote:
Originally Posted by VTSSDUDE
I would just disconnect the battery instead,
if you accidentally turn on the ignition with the seat unplugged the SRS (AIR BAG) light will come on
and stay on untill you get a Holden dealer or someone else with genuine a Tech2 to turn it off. :bawl:
I have removed them without taking the seat out before,
IMHO you do not need to remove the seat, just need some gentle leverage. ;)
I meant Airbag/SRS fuse sorry.
I thought you meant that, hey I often say SRS or ABS the wrong way,:lol:Quote:
Originally Posted by VTSSDUDE
it's an easy trap to fall into,
I just thought it was worth clearing up for the OP. ;)
thanks guys...didn't want to get heavyhanded & break more plastic bits