Catch Can Install

Quote:

---

Originally Posted by macca_779

You got it right in the first pic. And leave 3 and 4 alone

---

Thanks mate, I'm pretty green so just wanted to be sure. I assume both pics are right. :)
Cheers.

Referring to the second picture. The crank breather comes from the valley plate so it needs to go to the can then blank off the port in behind the throttle body (others step in if I am incorrect). Leave the 1 and 5 alone as that is a fresh air feed for the crankcase. I.e. air going in not out.

I wasn't impressed with the selection of ebay catch cans while shopping around, and I wanted to get one of the elite catch cans, but then I came across the saiko michi website and decided to go with one of their cans instead as they look pretty decent. I emailed to ask about getting one similar to the elite made and they said they already make one, it just wasn't on the website. Anyway here is a pic, looks to be much better than most of the cheap ones on ebay and also a lot cheaper than an elite. Also comes with a similar mounting bracket for easy install.

Anyone tried one of these?

Design:
http://i.imgur.com/fYyAw4Q.jpg

http://i.imgur.com/7lea4mM.jpg

Have a can installed with bottom drain as yours illustrated but find it much easier/cleaner to remove it to empty!

cheers Micks, looks like it will be easy enough to just remove and clean if required, will try to post up a pic and give my opinion on the quality when it arrives, won't be for a few weeks though.